How do you know what size drawer slides to get?

Measure the box, not the drawer front

Start at the back of the box and measure to the front of the box without including the face of the drawer. Once you have the length, round the number down. For example, if the drawer is 20 ½ inches long you will need to purchase 20 inch drawer slides.

Can drawer slides be shorter than drawer?

You should always use the longest slide possible for your application, without exceeding the drawer depth into the cabinet. The Height of a Drawer Slide is usually only a limiting factor, in the sense that you can't install a slide that is taller than your drawer or pull-out.

What size drawer slides for a 21 cabinet?

Similar to a kitchen cabinet, and with the standard vanity top depth at 21-inches, you'll find the finished depth of vanities mostly support a 16 or 18-inch drawer slide.

Do drawer slides need to be as long as the drawer?

Typically, side-mount ball-bearing slides should be the same length as the drawer box. For undermount slides, be sure to check the spec sheet—drawer boxes for these slides must be built to specific depths (front to back) in order to work properly.

How much smaller should a drawer be than the opening?

Most side-mount slides require 1/2” to 17/32” of clearance on each side of a drawer. That means each drawer should be 1” to 1-1/16” smaller than the opening to fit properly.

Drawer Slides EXPLAINED – How to choose the right drawer slide

What are standard drawer sizes?

You can expect to find 5 inch or 7-inch-high drawers in 18-inch, 24-inch and 30-inch widths with a 14-inch depth. People who own this type of drawer swear by them, claiming the soft sides allow the drawers to hold more than a similarly sized wood drawer box.

Which is better side mount or undermount drawer slides?

Side mounts stick out on drawers and interrupt the flow. When you open and close a drawer with undermount glides, you can feel the quality. Even though side mount glides are quiet and smooth when they open, undermount drawer glides take it to a new level.

Which drawer slides are easiest to install?

Mounting location: Side mounted drawer slides are the most popular and easiest to install. Center mount and undermount are also options.

What is the difference between undermount and bottom mount drawer slides?

Bottom mounts are attached to the bottom of the drawer and side of the cabinet. Meanwhile, undermounts are two slides attached to the underneath (invisible) of the drawer and side of the cabinet.

How do you replace drawer slides?

What are the different types of drawer slides?

Can you put drawer slides on the bottom?

The most common types of drawer slides are bottom-mount or side-mount. For side- mounted slides, I typically use these full extension ball bearing ones from Liberty Hardware. However, depending on the application, I also use these bottom-mount slides from Amazon quite a bit.

Can side mount drawer slides be mounted under?

Additionally, side mounts are built to carry a limited load, and if it is used as an undermount, there is a huge possibility that it might bend and malfunction. So for these professionals, the answer to the question “Can you use side mount drawer slides as undermount” will always be no.

How wide should drawers be?

This is typical on most kitchen cabinets. Drawers can be built almost any width for bottom mount, but the most common size is 3/4-inch smaller on both sides than the cabinet opening. For example, if the opening is 12 inches wide, the drawer should be built 10 1/2 inches wide.

How can you tell if a slide is Accuride?

With Accuride slides, you'll notice the embossing on the inside of the slides. These embossing are for production date only and do not provide any information the type of slide but is there for traceability.

Which drawer runners do I need?

Load Ratings and Roll Types

Always consider what each drawer will be storing. If you want to store heavier items, opt for metal drawer runners that have a suitable loading weight. Similarly, if the items are fragile, opt for soft close drawer runners to ensure items do not break.

What is the difference between soft close and self close drawer slides?

The "self" element means that the hinge or slide has a built-in element that pulls the drawer or door closed, sometimes with a tap or bang. "Soft"-closing means just that it glides. The drawer or door is pushed and it glides to a certain point and then hydraulics take over.

What size do kitchen drawers come in?

Standard non-custom kitchen cabinetry generally offers drawer widths from 12 inches to 24 inches, increasing by 3-inch increments. If the standard drawers available don't fit into your kitchen design, you can order custom drawers from a cabinetmaker.

What size are most kitchen drawers?

Kitchen drawers, or drawer boxes, correspond with the size of your cabinets and their intended uses: For base cabinets, drawers range 6-36" in width, 4-10" in height, and just under 24-36" deep, depending on the depth of the base cabinet (which could also be the island).

What is the standard size of a dresser drawer?

A medium-sized dresser's drawer has 28 inches or 71 centimeters in width, a drawer depth of 16 inches or 41 centimeters, and a height of 6 inches or 15 centimeters.