How do you install pegboard spacers?

You install the spacers by running a long screw through the pegboard and spacer and into the wall. The screws must go into hollow-wall anchors or into wall studs

wall studs

Sixteen-inch on center means there are exactly 16 inches from the center of the narrow (nominal 2-inch) side of one stud to the center of the next stud. Standard two-by-four studs actually measure about 1 1/2 inches by 3 1/2 inches. Studs are installed in vertical rows between the walls top and bottom plates.

https://www.hunker.com › what-is-the-distance-between-wall-s...

What Is the Distance Between Wall Studs? - Hunker

. Store-bought spacers come as kits that include expansion anchors and screws with washers. For a better connection, use screw-in drywall anchors instead.

Do you need a gap behind pegboard?

Pegboard needs about 1/2 in. of 'standoff' space behind it so the hooks can be inserted.

How far apart should furring strips be for pegboard?

furring strips you'll need. Assume one furring strip for each horizontal edge and for every wall stud (which are usually 16 inches apart). For example, a four-foot wide pegboard will need one strip at each end and two in the middle for a total of four.

How do you hang pegboard without furring strips?

Insert a screw with a washer into each marked hole on the pegboard, then fit a spacer onto each screw, on the back side of the pegboard. Position the pegboard against the wall and drive each screw into its corresponding anchor or into a wall stud. If you're not using a spacer kit, use 2-inch washer head wood screws.

How do you keep Pegboard hooks from falling out?

Pegboard Spacer

What are furring strips for pegboard?

But wait, what is a furring strip?!

They're often used for cinderblock or concrete walls when you want to cover it up or attach drywall. In this case, furring strips are used to create some dead space between the pegboard and the wall so the pegs or hooks can fit.

How much room do you need behind pegboard?

Your pegboard should have about ½ inch (1.27 cm) of space behind it so that you can install hooks. If you get a ready-made pegboard with a frame, that space should be built in. Otherwise, you'll need to create that space by building a frame or adding screw-in standoffs with spacers.

How much weight can pegboard hold?

Pegboard manufacturers state the standard 3/16″ pegboard can safely hold 100 lbs of weight. The pegboard I tested showed a single peg can hold over 150 lbs without tearing or pulling away from the wall.

How big are pegboard holes?

When purchasing your pegboard, make note of the hole size. Some have 1/4- inch holes, while others have 1/8-inch holes. The hole size will determine the type of hooks you need. Your home center will have a wide assortment of pegboard accessories, all of which can be quite useful.

How do you make pegboard look good?

Building a frame is a great way to give a finished look to the edges so your pegboard looks more polished. If you aren't into building your own, you can also have a custom frame built for it at a framing shop or buy as large a frame as you can find and then cut your pegboard to that size.

How do you build a pegboard wall?

What can I use instead of pegboard?

Velcro Strips work well in the home or office as a pegboard alternative because they are light and easy to stick in place. Simply peel and stick the adhesive side to the wall and stick the other piece to the object that will be stored on the Velcro strip.

Can you paint pegboard?

Once your pegboard is primed and sealed off properly, you're good to use your favorite water-based or non-water-based paint to finish off painting your pegboard. Here's how to paint a pegboard for the best results: Make sure the primer is completely dry before applying the first coat of paint.

How thick should furring strips be?

How Thick Are Furring Strips? Standard furring strips are marketed as 1-in thick, with the exception of the 2-in x 2-in strip. The actual thickness is usually just under a full inch. This makes them extremely versatile for a multitude of construction projects.

How much weight can furring strips hold?

Furring strips may support 50 lbs now, but this is NOT the right type of lumber for supporting live loads. And remember, kids grow... then their weight increases.

What are peg locks used for?

A new and innovative way to secure pegs and hooks to a pegboard. These peg locks are easy to use and hold the peg or hook in place. Pegitz peg locks hold the peg or hook in the hole so it is less likely to fall out when an item is removed. It is removable, reusable and helps to preserve your favorite holes.