How do you inspect a diamond?

Lay the stone onto the dot with the flat side down. Through the pointed end of the diamond, look down onto the paper. If you see a circular reflection inside the gemstone, the stone is fake. If you cannot see the dot or a reflection in the stone, then the diamond is real.

How does a jeweler test a diamond?

A loupe is a small magnification device used by jewelers to see minute details up close. Most jewelers use loupes to inspect diamonds for their class and clarity. If you don't have one then you're in luck, as Amazon has a huge selection of loupes at reasonable prices.

How should a real diamond sparkle?

The way that diamonds reflect light is unique: the inside of a real diamond should sparkle gray and white while the outside should reflect a rainbow of colors onto other surfaces. A fake diamond, on the other hand, will have rainbow colors that you can see inside the diamond as well.

How can you tell a diamond from a crystal?

Look down at the top of the crystal and count the sides.

Diamonds are cubic, while other similar stones like quartz are hexagonal. Look down at the point of the crystal and count the number of sides. If there are 4 sides, there's a possibility the crystal is a diamond.

How do you tell if a diamond is real with a flashlight?

Simply hold the loose diamond near a light source, like a lamp, and see the reflection of the light from the diamond. This test will be best if there is another gem that you'll compare along with it, like cubic zirconia. You'll see how different their effects are to light.

How To Assess A Diamond

Do real diamonds shine rainbow?

We all love how a diamond shines in the sunlight. Test your stone by putting it in direct sunlight and examining the colors it reflects. A real diamond will reflect both rainbow colors as well as white light. If you only get one of the two, then the diamond isn't real.

Do fake diamonds sink in water?

True diamonds have high density and should quickly sink to the bottom of the glass. Fake diamonds are not as thick, and therefore, more likely to float in water. This test is not always foolproof. Some materials that make up fake diamonds, such as cubic zirconia and moissanite, can sink if they are heavy enough.

Do diamonds glow under UV light?

You will see a glow in 30% of diamonds under a uv light. When exposed to uv light, there will be a diamond glowing different colors. 99% of the time, the glow is blue, but on rare occasions, diamonds glow white, yellow, green, or even red in color.

How can you tell a diamond from a cubic zirconia?

The best way to tell a cubic zirconia from a diamond is to look at the stones under natural light: a diamond gives off more white light (brilliance) while a cubic zirconia gives off a noticeable rainbow of colored light (excessive light dispersion).

Does a real diamond scratch a mirror?

Glass is rated a 5.5, and diamonds, the hardest mineral, are a 10. So, genuine diamonds will scratch a mirror. On the other hand, so will quartz (7), moissanite (9.25), and cubic zirconia (8).

Is there an app to test diamonds?

Now you can detect the authenticity of Diamonds and Gemstone through an App. Khanna Gems has launched a comprehensive mobile app available on both iOS & Android Platforms.

Can boiling water damage a diamond?

It's best for a consumer to not put diamond jewelry in a pot of boiling water, as is suggested by some jewelers. The reason being, that the consumer can cause damage to the diamonds if the boiling is not done properly.

Do fake diamonds shine in the dark?

A fake diamond will let the black shine through, and you may even be able to read a word depending on the size of the fake stone. If your diamond is mounted, make sure you can't see through it to the mount itself — that's a very bad sign.

What color does a diamond sparkle?

The way diamonds reflect light is unique: Inside the stone, a high-quality diamond will sparkle gray and white — known as brilliance — and throw off flashes of color called fire.

What is the rarest color in diamonds?

Red diamonds are the rarest of the colored diamonds, with only 20-30 existing in the entire world. They get their beautiful red color from a rare process during their formation, which changes the crystal structure of the diamond and causes light to pass through it differently than colorless diamonds.

What happens when you shine light through a diamond?

Only a portion of the light hitting a diamond is reflected; the rest travels through it. As the light moves through the diamond, it is scattered and fractured, creating the sparkle that diamonds are known for. This is the refraction.

How can you tell the difference between a diamond and a quartz?

Diamonds are isometric whereas quartz is hexagonal. Both of them have the transparency scale of transparent to opaque. The gravity of diamond is 3.1-3.5 whereas quartz have 2.6 '“ 2.7. Diamond is adamantine with greasy luster whereas quartz can have vitreous, resinous, adamantine and dull luster.

How do you test a diamond with sandpaper?

In the first experiment, rub a piece of sandpaper against the stone. Diamonds are one of the hardest naturally-occurring minerals so, if it is scratched by sandpaper, it's most likely not a real diamond.

Can I test a diamond with a multimeter?

Conventional ohm-meters, such as those based on 30 volts, therefore, typically can not distinguish moissanite or a synthetic diamond from an open circuit. The higher voltage mega-ohm testers will enable detection of the higher resistance stones, but may fail to distinguish a synthetic stone from metal.

Can you bite a diamond?

You can crush a diamond by biting it with your teeth

Your enamel will just chip off. Diamond can cut through all the other minerals on the Mohs Scale, so scratching or even breaking your tooth would be a piece of cake.