How do you find a well with a stick?

If you'd like to try dowsing for yourself, it's really quite simple. Cut a Y-shaped stick from a tree, making sure that all three sections of the Y are between 12 and 16 inches long. Your dowsing rod should also be relatively flat—no branches sticking out in odd directions.

Can you find water underground with a stick?

Dowsing uses a stick known as a dowsing or divining rod to help you find water on your land. Cut a fresh forked stick of peach, hickory, dogwood, cherry–or whatever works for you–and experiment with overhand and underhand grips while walking back and forth over a known water vein, underground spring, well, etc.

How does a divining stick work?

In water divining, dowsers use two rods or a single forked stick to detect underground water sources. They believe that when they walk over a water source, the rods will spontaneously cross or the stick will suddenly jerk downward.

What is it called when you find water with a stick?

Water dowsing involves the claim that a person can locate underground sources of water without using any scientific instruments. Typically, the person that is dowsing holds sticks or rods and walks around a property in the hopes that the rods will dip, twitch, or cross when he walks over the underground water.

How do well drillers find water?

If there are no wells in the area, or not enough information is available on existing ones, the hydrologist may contract with a well driller to put down some test holes. At these holes a pumping or aquifer test will be conducted. These tests indicate the water-bearing properties of the aquifer tapped by the well.

John Baker - Professional Dowser

What is witching a well?

According to Wikipedia, witching wells/dowsing is “…a type of divination employed in attempts to locate ground water, buried metals or ores, gemstones, oil, gravesites, and many other objects and materials, as well as so-called currents of earth radiation, without the use of scientific apparatus.”

How do you find underground water?

The ground penetrating radar (GPR) system is used for underground water detection. GPR is a promising technology to detect and identify aquifer water or nonmetallic mines. One of the most serious components for the performance of GPR is the antenna system.

How does a water witching stick work?

The bottom or butt end of the "Y" is pointed skyward at an angle of about 45 degrees. The dowser then walks back and forth over the area to be tested. When she/he passes over a source of water, the butt end of the stick is supposed to rotate or be attracted downward.

How do I find the water table in my area?

Contact your county or state health department, check with your State Certification Officer, or use this EPA website for a list of state certified laboratories in your area that do water testing.

Can you find water with a willow stick?

“After locating the underground water with a forked willow, he figured out how deep it was by using a willow stick about 3 feet long. He held it by the small end and let it bob up and down until it stopped bobbing and swung side-to-side. The more times it bobs up and down, the deeper the water.”

What wood is used for water divining?

The most popular dowsing tool, however, is the dowsing rod. It's a simple tool – nothing more than a forked branch cut from a live tree. You can use virtually any kind of tree, but Y-shaped sticks from willows, witch hazel, and various fruit and nut trees seem to be the most popular.

How do coconuts find underground water?

To describe their methods, they just carry these rods or sticks and coconuts in their hand and walk for a few metres in the field. Because they are believed to have divine power, the rods or sticks will move or rotate in their hands at the spot best for drilling a borewell.

What is water witch?

water witch. noun. a person who claims the ability to detect water underground by means of a divining rod.

How do well drillers know where to drill?

Geophysics methods can be used to identify the presence of water at depth. They are based on the changes in electric conductivity caused by the water. Finally bore holes can be drilled to assess the geological sequence of the strata and to identify layers potentially able to host an aquifer.

How deep does groundwater go?

Groundwater may be near the Earth's surface or as deep as 30,000 feet, according to the U.S. Geological Survey (USGS).

How do you make a dowsing rod?

Where is the best place to drill a water well?

Successful wells are often drilled near rivers; groundwater may be available even if the river is temporarily dry (Figure 2). Reliable wells have even been located near broad sandy riverbeds which are active once every 5-10 years (Dijon, 1981).

How deep should a well be for drinking water?

For drinking water wells it's best to be at least 100 feet deep so that surface contaminants cannot enter the well. The average well depth for private homes is between 100 to 800 feet [2]. You may need a deeper or shallower well if your area has different geology than another region of the country.

What zone is groundwater located?

Groundwater is found in two zones. The unsaturated zone, immediately below the land surface, contains water and air in the open spaces, or pores. The saturated zone, a zone in which all the pores and rock fractures are filled with water, underlies the unsaturated zone.

How do I find an artesian well on my property?

Sometimes a buried well can be found with a metal detector. Sometimes you can find that information on file with property records. Failing those things, the only way to determine the well location is to follow electrical lines and pipes from the house to the well. And that means digging.