How do you clean a really dirty toilet?

Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Takedown request   |   View complete answer on filtrete.com


How do you clean a super dirty toilet?

How to get rid of toilet stains
  1. Pour one cup of vinegar into the toilet bowl, swish the solution around with the toilet brush and leave to sit for a minute.
  2. Add one cup of baking soda and another of vinegar.
  3. Leave the solution to fizz for about five minutes, then scrub the toilet so the solution reaches all the stains.
Takedown request   |   View complete answer on cleanipedia.com


How do you deep clean an old toilet?

Simply measure out half a cup's worth of bleach and pour it into your toilet bowl, using your toilet brush to scrub it into the bowl and beneath the bowl's rim, also allowing five minutes to pass before you flush it all away.
Takedown request   |   View complete answer on goodhousekeeping.com


How do you clean a toilet that won't clean?

White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Takedown request   |   View complete answer on home.howstuffworks.com


What is the best cleaner for really dirty toilet?

Our top pick for the best toilet bowl cleaner is the Lysol Hydrogen Peroxide Toilet Bowl Cleaner, as it's a strong, effective formula that easily tackles soap scum, grease, limescale, and more.
Takedown request   |   View complete answer on realsimple.com


EPIC Toilet Cleaning!! AWFUL Rust, DISGUSTING Smell and Stains GONE!!!



How do you clean a toilet that hasn't been cleaned in years?

How do you clean an ingrained toilet bowl?
  1. Sprinkle baking soda or borax generously on the stained areas.
  2. Use the toilet brush to scrub a little bit and spread the powder around.
  3. Add approximately 1½ cup of white vinegar into the bowl.
  4. Leave the solution to work for 15-30 min.
  5. Rinse.
Takedown request   |   View complete answer on thehealthyjournal.com


What do plumbers use to clean toilets?

Bleach-based cleaners can remove stains from the toilet bowl without too much trouble. It has been used for a long time and is the go-to option because it not only cleans but disinfects too.
Takedown request   |   View complete answer on artplumbingandac.com


What is the brown stuff in my toilet bowl?

Iron Bacteria, Manganese Bacteria and Sulfur Bacteria

These organisms grow in soil or shallow groundwater with high iron, manganese or sulfur concentrations. Water containing these bacteria leaves behind slimy brown rust deposits in plumbing fixtures and toilets.
Takedown request   |   View complete answer on angelwater.com


How do I get brown stains off the bottom of my toilet bowl?

Citric acid

Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
Takedown request   |   View complete answer on goldcoastplumbingexperts.com.au


How do I get rid of brown limescale in my toilet?

How To Remove Limescale From Your Toilet
  1. Pour vinegar into the toilet bowl.
  2. Leave for 3-4 hours.
  3. Scrub the toilet bowl.
  4. Flush the toilet.
  5. Repeat as necessary.
Takedown request   |   View complete answer on tapwarehouse.com


What happens if you leave bleach in a toilet too long?

Leaving bleach in a toilet overnight is fine, but you shouldn't leave it any longer, or else it might corrode your toilet. If you do decide to leave it in the bowl overnight, let other members of your household know so that they don't use the toilet and accidentally mix the bleach with ammonia from urine.
Takedown request   |   View complete answer on h2horganizing.com


How do I whiten my toilet bowl?

Combine 2 parts borax with 1 part lemon juice to form a paste. Smear the paste onto any remaining stains in the bowl, such as the ring formed around the waterline. Borax cleans while lemon juice whitens. Leave the paste to soak for two hours to lighten stains and whiten the bowl.
Takedown request   |   View complete answer on homeguides.sfgate.com


Will a dishwasher tablet clean my toilet?

Dishwasher tablets are meant to dissolve hard water stains, so they're the perfect solution for cleaning toilets. Besides cleaning dishes and toilet bowls, you can use dishwasher tablets for a few more cleaning projects around the house.
Takedown request   |   View complete answer on tasteofhome.com


How do you clean toilet sludge?

Without draining out the water, pour white vinegar into the tank, stopping at least an inch below the top rim. Let the vinegar-water solution sit for 12 hours to dissolve mineral deposits, rust, and mildew. Flush the toilet a couple of times to remove the vinegar from the tank.
Takedown request   |   View complete answer on thisoldhouse.com


Why should you put baking soda in your toilet tank?

White vinegar and baking soda in equal parts is a cost-efficient and effective means of getting rid odors in a toilet. Add them to the tank, mix them in and then use the toilet brush to gently scrub the tank. Let it sit for a few hours, scrub the tank again and flush.
Takedown request   |   View complete answer on home.howstuffworks.com


Can you use CLR in a toilet?

As Ann discovered, CLR Calcium, Lime & Rust Remover is a great way to clean away calcium and lime deposits as well as scale and rust from your toilet.
Takedown request   |   View complete answer on clrbrands.com


Does hydrogen peroxide clean toilets?

Hydrogen peroxide can also be used to clean your toilet bowl. Pour half a cup of hydrogen peroxide into the toilet bowl, let stand for 20 minutes, then scrub clean. Spray hydrogen peroxide onto mirrors or glass surfaces and wipe with a microfiber cloth or crumpled newspaper for a streak-free, mildew-free shine.
Takedown request   |   View complete answer on hellohomestead.com


How does Dawn dish soap clean toilets?

This is Why it Works. It's pretty simple — just like they do on food particles that are stuck to your dishes in the sink, the combination of hot water and dish soap help to dissolve and break up whatever it may be that is lodged in the toilet, causing a clog. This handy tip is great should you find yourself in a pinch.
Takedown request   |   View complete answer on apartmenttherapy.com


How do you make an old toilet look new again?

Option 1: Use Vinegar and Baking Soda

Pour two cups of white vinegar around the edges of the toilet bowl, allowing it to swirl around and settle in the bottom. It will naturally dilute a bit since there's already water in the bowl. While the bowl's wet, sprinkle a few tablespoons of baking soda into the toilet bowl.
Takedown request   |   View complete answer on hgtv.com


Can you leave baking soda and vinegar in toilet overnight?

For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging. If your toilet remains clogged or continues to get clogged, this may be an indication of plumbing problems such as mineral buildup or pressure issues.
Takedown request   |   View complete answer on mrrooter.ca


Can I leave vinegar in toilet overnight?

To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Takedown request   |   View complete answer on necscleaning.co.uk


What happens when you put white vinegar in your toilet?

Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits. All you need to do is pour a couple cups of vinegar in your tank and let it sit for an hour or so, then scrub and flush to rinse.
Takedown request   |   View complete answer on home.howstuffworks.com


How do you clean a toilet with filth caked on?

Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Takedown request   |   View complete answer on filtrete.com
Previous question
How far back does an IRS audit go?