How do you clean a concrete floor after construction?

You can use a traditional rope mop and bucket, but it's not necessary to get a concrete floor so wet. You can use a Swiffer covered in a wet rag to mop the floor. Use a mild detergent or a vinegar/water solution, and ring the rag out thoroughly before attaching it to the Swiffer.
Takedown request   |   View complete answer on hunker.com


What do professionals clean concrete with?

What chemical will clean concrete? If you have mildew stains, the best chemical to clean concrete is trisodium phosphate. Combine two tablespoons of the chemical with two tablespoons of powdered laundry detergent and one-quart water. Then, apply it to the stained area and scrub using a stiff brush.
Takedown request   |   View complete answer on washh.com


What is the easiest way to clean concrete floors?

Don't use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners. Mix a solution, apply to floor with a wet mop and then rinse with a mop dipped in clean water.
Takedown request   |   View complete answer on hgtv.com


How do you clean cemented and concrete floor?

HOW TO CLEAN CONCRETE FLOORS
  1. Dust mop, vacuum or sweep to remove dirt and debris from the floor.
  2. Damp mop with a pH-neutral cleaner and clean water.
  3. Let the concrete dry before allowing foot traffic or replacing rugs.
  4. Reapply sealer or floor wax as needed for a protective coating.
Takedown request   |   View complete answer on concretenetwork.com


How do you mop an unsealed concrete floor?

Recipe #2 – Make a solution of 1 part all-purpose cleaner, 2 parts warm water and 4 parts ammonia. Recipe #3 – Mix 1/3 cup Tide to 1 gallon of warm water. Any of these should work well for cleaning unsealed cement garage floors.
Takedown request   |   View complete answer on anderson-doors.com


Sweeping Compounds - Cleaning Dust



Can you clean unsealed concrete?

How to Clean Unsealed Concrete Floors. The first step in the cleaning process is simply to remove as much dust and dirt as possible. Use a stiff shop broom to clear up the larger particles, keeping everything dry. If possible, use a hard floor vacuum or shop vac to thoroughly clean up any residual dust and debris.
Takedown request   |   View complete answer on hardrockconcretecoatings.com


How do you clean an unfinished concrete basement floor?

Scrub especially dirty basements with a cleaning solution.

If a concrete or concrete-block surface is especially dirty, add detergent and a quarter cup of ammonia to a bucket of warm water and brush the solution over the surface with a stiff nylon brush.
Takedown request   |   View complete answer on rd.com


Will straight bleach harm concrete?

Bleach is safe to use on concrete. When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss. It also disinfects concrete.
Takedown request   |   View complete answer on hunker.com


What does vinegar do to concrete?

When it comes to cleaning stone, concrete, and ceramic tile floors, leave the vinegar under the sink. Just like with stone countertops, the acid in vinegar will strip away the protective sealant from stone tiles, making them look dull and leaving the surface vulnerable to etching and pitting.
Takedown request   |   View complete answer on housetipster.com


Does white vinegar clean concrete?

White vinegar and a little scrubbing with a brush is a very effective, eco-friendly way to remove rust stains from concrete—even those that are decades old. Pour the white vinegar directly onto the stain, allow the liquid to penetrate the area for 20 minutes, and scrub with a stiff-bristled brush.
Takedown request   |   View complete answer on thisoldhouse.com


What is the best product to clean concrete floors?

If you're dealing with dirty concrete, one of these products should be able to help.
  • BEST OVERALL: Zep Neutral pH Floor Cleaner Concentrate ZUNEUT128.
  • BEST BANG FOR THE BUCK: Sunnyside 64216 TSP All Purpose Cleaner.
  • BEST ECO-FRIENDLY: ACT Concrete Cleaner.
Takedown request   |   View complete answer on bobvila.com


Can you use bleach on concrete?

Concrete driveways are prone to dirt, residue, mold or mildew. Yes, you can clean them with bleach. In fact, bleach not only removes many stains, but it also deodorizes and kills mold and mildew when used properly.
Takedown request   |   View complete answer on powerwashingprosnj.com


Can you use Swiffer on concrete floors?

First, let's talk about what you should not do to your polished concrete floor. Never use any acidic based cleaners like: Swiffer Wet-Jet.
Takedown request   |   View complete answer on jencocompanies.com


How do you clean interior concrete floors?

How to Clean Concrete Floors
  1. Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop.
  2. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section.
  3. Mop up in sections. ...
  4. Dry.
Takedown request   |   View complete answer on simplegreen.com


Can you use OxiClean to clean concrete?

Although it's possible to scatter the OxiClean powder on the wet concrete and then scrub with a stiff broom, you'll probably get a more uniform result by mixing the powder with water first. Use four scoops of powder per gallon of water. The powder mixes best into warm-to-hot water.
Takedown request   |   View complete answer on washingtonpost.com


Can you use baking soda to clean concrete?

ANSWER: Sprinkle the driveway with a box of baking soda. Use a stiff brush dampened with water and scrub the area until the stains are gone.
Takedown request   |   View complete answer on homes.winnipegfreepress.com


What does baking soda do to concrete?

Baking Soda: Creates voids and pinholes in the surface. It acts as an accelerator. Veining Compound: Absorbs water from the mix and creates a colored line in the concrete. Spritzing with water activates cement and makes the vein more solid.
Takedown request   |   View complete answer on concreteexchange.com


How do you make concrete look new again?

3 Ways to Make Old Concrete Look New Again
  1. Power Wash. Over time, your concrete will accumulate grime and dirt. ...
  2. Resurface. If you're looking for a quick and easy way to improve your curb appeal, resurfacing your concrete steps and driveway is a great way to start. ...
  3. Add Stain or Sealing Coats. ...
  4. Revive Your Old Concrete.
Takedown request   |   View complete answer on packmanscoatings.com


Is vinegar good for cleaning cement floors?

Cleaning Concrete Floors with Vinegar

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.
Takedown request   |   View complete answer on tipsbulletin.com


Does Dawn dish soap remove oil from concrete?

Cola has phosphoric acid in it, which can help remove oil. Dish soap. Choose a highly concentrated, oil busting dish soap, such as Dawn. Squirt it over the stain and spread it around to cover the entire affected area.
Takedown request   |   View complete answer on greatwhitepressurewashing.com


How do you clean a concrete garage floor?

Mix a half-cup baking soda in a gallon of warm water and use it as an all-purpose cleaner. You can also mix baking soda with a few drops of liquid soap, to make a paste, and use it to scrub light stains. Don't underestimate the power of warm, soapy water to keep your floors clean and remove minor stains.
Takedown request   |   View complete answer on gilmour.com


What can I use to clean my concrete basement floor?

Mix a quarter cup of ammonia, a few squirts of dish soap, and water in a bucket. Use a nylon scrub brush with stiff bristles to scrub the cleaning solution onto the concrete floor. If your basement has a built-in drain, pour the cleaning solution directly onto the floor stains.
Takedown request   |   View complete answer on tipsbulletin.com


Can you use Pine Sol on concrete?

You can use Pine-Sol® Cleaners on most concrete floors. Pine-Sol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine-Sol® for 12 gallons of cleaning power.
Takedown request   |   View complete answer on pinesol.com


Are steam mops good for concrete floors?

Steam mops are also a good choice, particularly for unsealed concrete, as they can clean surfaces with just water. (If you have sealed concrete floors, you'll want to check with an expert before steam mopping to avoid any risk of damaging the sealer.)
Takedown request   |   View complete answer on bustle.com
Previous question
Who is Jimin best friend?
Next question
Is birds plural or singular?