How do you burn a multi-wick candle evenly?

How do you make 3 wick candles burn evenly?

With three wicks lit at once, the candle at first will pool wet wax in a ring around each wick; then the pool becomes more of a clover shape and ultimately reaches out to the outer perimeter of the candle. Turn the wicks slightly inward before burning to promote an even burn.

Are you supposed to light all 3 wicks?

If you decide to burn just one wick at a time, still do the first burn with all three wicks -- then alternate between wicks for the single burns, so that you keep the level of wax more or less even across the surface of the candle.

How do you stop one wick candle from tunneling?

The best way to fix candle tunneling is to prevent it from happening in the first place. And it's very simple, too. To prevent tunneling, all you need to do is burn your candle long enough each time so that the entire top surface of wax is melted. This is especially important the first time you burn your candle!

How do you burn candles first evenly?

For the first burn, place the candle in a draft-free area to ensure that it will burn evenly. After lighting it, check it every 30 minutes or so to make sure that the first layer of wax has completely melted—the deeper the layer, the better.

Candle Burning 101 - My Tips and Tricks for the Perfect Burn!

Why does my candle not burn evenly?

Incorrect wick size: A very common cause of tunnelling is the usage of a wick too small for the volume of wax or the width of your vessel. A wick which is too small may, despite its best efforts, not have enough power to burn the wax from edge to edge.

Why is my wick drowning?

If your candle wick is drowning, that means the size of the wick might be too small for the candle container or the quality of the wick is low. This causes the wick to burn too quickly and “drown” in its own wax pool.

What causes sinkholes in candles?

They vary in size and depth, and have a direct effect on how your candle wick functions. Sinkholes occur naturally from the process of the wax setting up. As wax is heated to melt it into liquid form, the wax expands literally taking up more space as it changes form from solid to liquid.

Why do my candles sink in the middle?

Wax sinks when it sets because as the wax cools, it slowly contracts and can leave what I refer to as 'sink holes' in the middle of your candles, but can also present as sunken dips around the wick.

Why should you only burn candles for 3 hours?

If you burn your candle for more than 4 hours at a time, carbon will collect on the wick, and your wick will begin to "mushroom." This can cause the wick to become unstable, the flame to get too large, your candle to smoke, and soot to be released into the air and around your candle container.

Are you supposed to pour out candle wax after it burns?

How do I remove the last remaining wax from my candle vessel so I can reuse it? If the remaining wax is liquid, we suggest to carefully pour the wax into a lined waste container. Never pour hot wax into your drain as it can cause clogging problems and/or damage your garbage disposal.

When should I double wick a candle?

There is no set rule for when a double wick should be used. However, a general guideline is that candles with a diameter of 4" or larger may need a double wick (or triple if preferred).

How do you fix a tunneling pillar candle?

If you're using a container candle, oftentimes, it is made of a softer wax compared to a pillar candle. In this case, you can simply take your unlit candle and use a spoon to scoop the excess wax around the edges. You can also push the excess wax towards the center to correct the tunneling.

Why is my wick mushrooming?

The most common reason for mushroom wicking to occur is down to the size of the wick you have opted for. Usually a wick that is too big causes more wax to be sent to the flame than it can handle. As the flame is unable to burn the wax it has accumulated, carbon begins to build up forming the mushroom wick.

Why is my candle dancing so much?

Any bursts of air that cause your candle flame to dance around also cause your wick to use fuel at an inconsistent pace. The wick is drawing oil from the candle wax as fuel, and a buildup is created within the wick. Bursts of air cause the flame to burn less oil than the wick is taking in.

What happens if you put too much fragrance oil in a candle?

Add too much fragrance: Using more fragrance oil does not always guarantee a stronger scent throw. Each wax has a recommended fragrance oil load and going beyond that limit can cause the fragrance oil to separate from the wax which could be a potential fire hazard (not to mention the ugly "gooey" spots it can create).

What happens if you don't Trim candle wicks?

Leaving a wick long means that you'll have a larger flame, which will melt more wax and give the candle more fuel. This larger amount of fuel can lead to incomplete combustion, which in turn creates more soot, making your candle container black and dirty.

Does a thicker wick burn faster?

The two main factors for burning candles is wick size and type of wax. Wider or thicker wicks will burn much faster than thin ones, and the material the wick is made with can also make an impact. Different types of candle wax burn at different temperatures.

Why should you trim your wick?

Long wicks can cause the candle to burn unevenly, disrupting the “memory burn." (This is simply a fancy name for allowing the wax to melt to the edges of the container on the first burn.) Trimming your wick allows for a cleaner burn and can even save you money.

What does double pour mean in candle making?

Double Pour. A candle pouring technique in which a container candle is poured in two stages. Typically, the first pour will fill 70-90% of the candle. After cooling, when the wax has contracted, the second pour fills the candle to the desired level.

Why do my homemade candles not smell?

To troubleshoot the problem, first try burning your candle in a smaller room, such as a bathroom or home office, in case the scent is simply subtler than expected. Also, try burning your candle for a longer period of time, as it may simply need a full melt-pool to diffuse the scent.

How do you burn a candle properly?

How do you center a 3 wick candle?

For round shape candles, a triangle placement works best for 3 wick candles. Place three wicks evenly apart at each point of a triangle, centered in the candle container. In terms of double wick candles in a round container, place them evenly apart centered in the container.