How do I unlock my Kwikset SmartCode?

Kwikset SmartCode locks are available as lever sets or deadbolt locks. Our sample is a deadbolt version which has a motor-driven deadbolt. Unlocking from the inside of the door is done manually by turning the thumb turn. Locking and unlocking from the outside can be done automatically by an electric motor.

Why is my Kwikset lock not unlocking?

Check that the bolt hole is at least 1” deep so the bolt fully extends. Check that the door closes properly so that when the deadbolt is extended, it is going into the bolt hole and not hitting the deadbolt strike or door frame. Check that the mounting screws securing the exterior keypad are not over-tightened.

Why is my Kwikset keypad not working?

My Keypad Is Unresponsive

If beeping is not heard on all buttons, replace the batteries. If battery replacement does not solve the problem, contact Kwikset Support at 1-866-863-6584.

How do I reset my Kwikset lock code without the key?

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

Anyone Can Bypass The Kwikset Powerbolt 2. SHARE! People need to know!!!!!

Where is the reset button on Kwikset lock?

Why is my keypad door lock not working?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

Why is my electronic door lock not working?

Remove the gears and axles. Then, use compressed air to gently clean the lock body and remove any dust or buildup which may be blocking normal function. Reset the gears and test the lock to see if the parts are able to move more smoothly. Then, reassemble the rest of the smart lock and reinstall it on the door.

Why is my Kwikset lock blinking red and green?

Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.

How do I reset my smart code door lock?

Hold the button continuously for 30 seconds until you hear a beeping sound and see the status LED flashing red. Press the program button once again until you see the status LED flashing green and hear two beeping sounds. The Kwikset SmartCode deadbolt has now been reset and ready to be set up again.

How do you punch in code on Kwikset lock?

How do you unlock Kwikset Halo?

How do I unlock the Halo deadbolt? The Halo deadbolt can be unlocked using the Kwikset app. From the outside, Halo can be unlocked via an access code or with a key. From the inside, Halo can be locked using the sleek turnpiece.

What if my keypad is not working?

An outdated or corrupt driver could be the reason your keyboard isn't working. Step 1: Right-click on Start and select Device Manager. Step 2: Expand Keyboards. Step 3: Right-click on the affected keyboard and select Update driver.

What happens if Smart Lock battery dies?

Your Smart Lock will give you low-battery warnings for multiple weeks before it loses power. However, if your Smart Lock dies entirely before you can replace your batteries, your key will still work. This is the same deadbolt key that you've always used - the Smart Lock doesn't change the key needed.

How do you unlock a door without a key?

Where is the program button on Kwikset lock?

While the door is open, press the “Program” keypad button located on the interior side of the door. Enter a four to eight digit security code that you can easily remember on the outside electronic lock keypad.

How do I reset my Kwikset SmartCode 913?

How do I get a master code for Kwikset lock?