How do I unblock a Saniflo macerator?

If the macerator is blocked, clear it. It could be that a foreign object is tangled around the blade causing friction. To remove the object, use a pair of thin-nosed pliers and turn the blade counter-clockwise, removing the object as you turn.

Can you put drain Unblocker down a macerator?

Water rises upto near rim of bowl. Can I throw some liquid unblocker down or will that ruinthe macerator? Noooo, don't put chemicals down it. You will need to disconnect it and manually remove the blockage or even better call a plumber!

Can I put drain Unblocker in a Saniflo?

Chemicals should NOT be used on saniflow systems as it can damage the seals inside (nor plunge them), if all else is draining fine then as above check the waste in the shower.

Can I plunge a Saniflo?

Can you plunge a macerator toilet? If you have a blockage with your Saniflo or macerator toilet it's not as simple as using a plunger to unblock it. Using a plunger on a macerator toilet could damage the macerator system so if there is a blockage it will need to be taken apart and cleaned.

Do macerating toilets clog?

A macerator grinds solid waste into small enough particles that it can travel through your other waste pipes. Because of this, if you get a clog or blockage in your Saniflo, you cannot simply plunge the toilet to unblock it or you may damage the macerator.

How to unblock a toilet macerator saniflo that won't flush. Grundfos Sololift2.

How do you use a macerator descaler?

Pour 1-2.5 litres of Toilet Cleaner & Macerator Descaler into the toilet bowl. Turn the macerator pump on for a few seconds to allow the descaler to enter the macerator. Turn the macerator off again and allow to work for 2 hours. Do not flush the toilet during this time.

How do I know if my Saniflo is blocked?

If your sink, toilet, bath or shower shows a higher than normal water level, this might be a sign that your macerator is blocked. Typical blockages include baby wipes, sanitary products, grease and food waste. It's important to avoid putting these items down your Saniflo unit to prevent blockages.

How do you clean Saniflo pipes?

You can also use white vinegar or preferably, Saniflo descaler to do this: disconnect your fixture from the power supply, then pour 2 litres of product in the bowl of your toilet. Leave it to work for a few hours and then reconnect to the power supply and flush.

Can a plumber fix a macerator?

If your thinking of working on your own macerator, please remember that your most likely to cause more damage than fix it which is the reason you should leave it to an emergency plumber but most important when it comes to DIY plumbing, when it comes to macerator problems, this type of work can be extremely dangerous.

How often should you use Saniflo descaler?

It is recommended that Saniflo Descaler is used for up to 3-4 times per year depending on water hardness in your area. Most of our work is in London and the water is seriously hard in some places. So we ourselves recommend you descale a Saniflo 3 times per year.

How do you fix a clogged toilet macerator?

Blocked macerator or pump

The blockage will most likely be toilet paper or other waste that has become stuck in the blade. To remove this waste the technician will then use pliers and then turn the blade counterclockwise and carefully remove the waste accordingly.

Can you poop in a Saniflo toilet?

The simple answer is that yes you can poop in a Saniflo toilet. As with normal toilet systems you can put any organic waste into the toilet bowl and use the flush mechanism to remove it—which includes toilet paper—although like a standard toilet too much toilet paper can lead to blockages occurring.

Can you use vinegar in a macerator toilet?

White Vinegar, as in regular household, kitchen variety. Vinegar will do the job without harming rubber seals. It will easily descale most lime build ups. You should likely mix with plain water in a 25x75 mix, depending on how much you intend to use.

How do you descale a Saniflo compact toilet?

Why does my Saniflo keeps flushing?

Saniflo does not switch off. If the pump flushes and keeps flushing again and again, even when the macerator is clear, this could only mean there is a blockage somewhere in the system. Unfortunately, this blockage could be anywhere. The most common places you could find it is in the macerator, or in the pump.

How long does a Saniflo toilet last?

Saniflo products usually last somewhere in the region of 10 to 15 years. In most cases, with proper care, a Saniflo system will last a lot longer. It also depends on how often you intend to use the toilet. All toilets are tested up to 50,000 flushes.

How long does a macerator last?

How Long Does a Macerator Pump Last? The common rule regarding macerator pumps, is the machine, which will usually last up to 15 years, if handling a small amount of waste. With standard usage in a main bathroom in a domestic home, you can assume a macerator to last at least for about 10 years.

How much does it cost to fix a Saniflo?

We charge a fixed price of £107.50+vat for a standard Saniflo repair. Our standard fixed price repair will cure noisy units, free any jams and blockages within the unit, fix minor electrical faults or leaks & overflows.

Why is my macerator pump not working?

A blockage in the macerator

First, turn off the power to the pump at the mains supply. Then, check if there is a blockage in the pump's macerator. If so, clear it. It could be that toilet paper or floss is stuck under the blade.

Why is my Saniflo noisy?

Why does my Saniflo keep vibrating/making a buzzing noise? If when flushing the toilet you hear a horrible vibrating noise, there's probably something that has been lodged in the macerator blade. Turn off the Saniflo and remove the lid. If you see an obstruction straight away, remove it.

Can I use bleach in my Saniflo toilet?

Alternatives simply don't do as a good a job, and can in fact damage the internal operations of the unit. For example, regular use of ordinary household bleach or other toilet cleaners will damage the rubber membrane which covers the pressure switch that governs when your SANIFLO macerator unit turns itself on and off.

Do macerating toilets work well?

Macerating toilets are as durable as standard toilets, usually working for around 10 to 15 years before any parts need replacing. They're also easy on the environment. While some models use the standard 1.6 gallons per flush (GPF), most upflush toilets use around 1.28 GPF, with some using as little as 0.8 GPF.

How does a Saniflo toilet work?

Waste goes to the Saniflo or WasteAway unit when the toilet is flushed, instead of directly to an outflow pipe. The macerator technology then kicks into action. A blade spins at up to 3,600 rpm to pulverise waste into liquid in a matter of just seconds. The unit's pump then comes to life.