How do I know if my deck is dry enough to seal?

Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it's ready to be sealed or stained.

How long should deck dry before sealing?

Let your deck dry completely — give it at least 48 hours before applying a deck sealer.

Does a deck have to be dry before sealing?

The wood on a new deck needs to dry thoroughly before sealing or staining. If the wood came still wet with preservative, allow it to dry about 30 days before applying stain or sealer. To test the wood to see if it's dry enough to stain or seal: Pour a little water on the wood.

How long after power washing can you seal a deck?

Sand Your Deck Before Sealing

After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.

How long does a deck need to dry after pressure washing before staining?

Wood Deck Staining Overview

Let's start by answering the question: how long should you wait for your deck to dry after you power wash it? The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

When to Seal or Stain a New Wood Deck

Can you apply Thompson's water Seal to wet wood?

Thompson's^® WaterSeal^® Waterproofing Stains can be applied to damp wood, so you only have to wait about two hours to begin applying stain. Some of our other products require that the wood dry for 48 hours before applying a deck coating.

Can you seal wet wood?

Absolutely not. There's an adhesive quality to just about any sealant, and moisture is going to kill it. You have to get the moisture content down to 9% or lower. When wood is freshly chopped down, it's considered to have a 100% moisture content, and it takes seasons (sometimes a full year) to dry it out properly.

How warm does it need to be to seal a deck?

How long do you have to wait to seal pressure treated wood?

Following construction, most manufacturers of stains and paints recommend a waiting period – from a week to two months – before applying a finish to treated wood, if the project was built with lumber that was not kiln-dried after treatment (KDAT).

What moisture level is acceptable in wood?

In order to be usable for a construction project, wood must be kiln or air-dried to a moisture level of 19%. But wood that is intended for indoor use— that is, wood intended to be used for woodworking— must have a moisture content level that is less than half that amount, at only 9%.

How dry should deck be before staining?

It's important to let the wood dry thoroughly so none of the water that soaked into the wood gets trapped under the stain. In perfect drying conditions, 48 hours is enough for the wood to get to where it needs to be before staining. Decks that don't get much sun should be given an extra day to dry out.

How many dry days does it take to stain a deck?

Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it's best to let the wood fully dry before finishing.

What happens if you stain a deck too soon?

If you stain pressure-treated wood too soon, the stain will be unable to fully penetrate the wood, and you will not get the protective benefits of the stain. What is the best stain for pressure-treated wood? An oil-based stain is the best for pressure-treated wood.

What happens if you stain a wet deck?

If you stain a deck while it's still wet from pressure washing, the end result will defer from your expectations. Wood paints are usually pigments mixed in oils, which the wood absorbs. If you apply it on wet surfaces, it won't be absorbed properly and you will end up with an uneven-looking deck.

Can you seal deck in cold weather?

Don't seal a deck below 50 degrees.

You don't want to begin the sealing process until you can safely guarantee the temperature will remain above 50 degrees for at least 48 hours.

What time of year should you seal your deck?

Summer is generally the best time to waterproof your deck because it gives you the opportunity to clean it thoroughly and seal it properly without worrying about rain. It takes about two to three days for a deck to completely dry out after sealing and you'll need up to six days for it to be fully functional again.

How do you prepare a deck for sealing?

Proper prep is key to a successful deck sealing. Begin by repairing or replacing any loose or broken boards. Then, use a power washer to scrub the surface clean. Allow the deck to dry for 24 hours, then sand the surface with 60- to 150-grit sandpaper or a sanding disk.

How do you know if wood is dry enough to paint?

The bead test is also a good way of determining if the wood is too wet to paint. Sprinkle some water on the wood. If it beads up, it means the fibers in the wood are resisting the water because they are already saturated with moisture. If this is the case, then the wood won't easily accept paint.

How long does wet wood take to dry?

How Long Does It Take Wet Seasoned Wood To Dry? It can take freshly cut 'green' wood to naturally dry out at least 6 months if the wood has a low starting moisture content and its stacked in the correct environment, If not, wood can take up to two years to season.

What happens if it rains after applying Thompson's water seal?

What happens if it rains after applying Thompson's water seal? A light shower will not significantly affect a deck with Thompson's waterseal, but a heavy downpour will likely cause the product to dry cloudy on the surface. In any case, the sealant will still work despite the rain.

Can you seal a deck after rain?

First, ensure the deck is completely dry. Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing.

What is the drying time for Thompson Water Seal?

Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

How can you tell if a stain is dry?

You can determine if the stain is dry based on the feel. Oil-based stains do not smell or feel tacky to the touch if they're dry. Water-based stains become dry when they no longer seem cool. You'll also notice a powder will form on water-based options if you lightly sand the surface.