How do I keep my vinyl pool clean?

What is best to clean vinyl pool?

Vinyl liners can rip, so you'll want to make sure that you use a brush that is compatible and that you don't use excessive force. For simple stains, apply a mild cleanser directly to the liner and then scrub it with your pool brush or a soft cloth. You can pick up various speciality cleaners from your local pool store.

What do you use to clean a vinyl above ground pool?

White vinegar can be used as an alternative to other chemicals when cleaning your above ground pool liner. Since it is a mild acid, it will help to remove stains and debris from the liner. Like you would with bleach, apply the vinegar with a sponge, put it all over the liner, and then scrub it with a brush.

How do I protect my vinyl pool liner?

Patch Tears Quickly

Your pool supply store should carry a special patching glue so that you can repair your liner without having to drain the pool. Not only does this help to protect your pool liner from potential warping, but it spares you the cost of having to refill your pool after the patching is done.

How do you maintain an above ground vinyl pool?

Vinyl pool care

What chemicals do I need to put in my above ground pool?

How often should you change the water in an above ground pool?

Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.

Are chlorine tablets safe for vinyl pools?

Chlorine tablets such as dichlor and trichlor can damage vinyl liner pools if they come in contact with the liner. Chlorine tablets are often highly concentrated. As a result, they increase chlorine concentration which can bleach and weaken the liner's vinyl material, greatly reducing its life.

How do I keep my vinyl pool liner from fading?

How do I extend the life of my pool liner?

Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.

Can I use vinegar to clean vinyl pool liner?

If you're not one for harsh chemicals, there are plenty of natural and organic options for removing stubborn stains on your pool liner. White vinegar or organic dish soap are great alternatives and can help you tackle most mildew and stains with less health and environmental impact.

Can you use a robotic pool cleaner on a vinyl pool?

Although most robotic cleaners will state that they work on any pool surface, there are some robotic cleaners that I would not recommend with a vinyl liner. Aquabot cleaners, the traditional type, have a small risk of damaging a vinyl liner when parts wear out.

Can you use a magic eraser on a vinyl pool liner?

1 Answer. Yes, we have successfully used a magic eraser to clean the scum line on a vinyl liner and on fiberglass steps. Always test on your pool in an out of the way area first to make sure your liner will hold up okay.

What causes a vinyl pool liner to fade?

Below the pH neutral level of 7.0, pool water becomes acidic and corrosive to vinyl. Over time, this can suck out the plasticizers and resins that keeps vinyl pliable. Over more time, a liner in a low pH “acid bath” will become brittle, fade in color and eventually begin to literally fall apart.

Will Shock bleach pool liner?

But beyond fashion faux pas, adding shock directly to the pool water if you have a vinyl liner can be a disaster. The shock granules will sink the bottom and bleach out your liner. The bleached area becomes brittle and frail, causing leaks.

Is it normal for a pool liner to fade?

Your liner will fade naturally over time as it ages and is exposed to chemicals and UV rays. You'll want to monitor significant rust stains or algae buildups, however, as they can be difficult (if not impossible) to remove. Another common issue is aesthetics. As liners fade, so too do their patterns.

What type of chlorine is best for vinyl pools?

(Sodium dichloro-s -triazinetrione) or Di-chlor for short, is the chlorine you MUST USE for all vinyl pools! Di-Chlor is fast dissolving – It will not sit on the vinyl and eat away at it.

Can I use bleach instead of chlorine in my pool?

Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.

Can I shock a vinyl pool?

If your pool's liner is made of vinyl, you'll need to be careful about using too much shock. To avoid vinyl damage, you can mix shock with water in a bucket and make sure it's completely dissolved before adding it to your pool. This will help the granules mix into the water better.

How long can water sit in pool without chlorine?

If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.

Should I add chlorine to my pool every day?

The granular chlorine is used once a week to shock the pool or once a day as a daily dose of sanitizer. A pool shock involves raising the level of chlorine in the water so high that it kills bacteria and neutralizes organic material. The amount you will need depends on the amount of water contained in your pool.

Should you run your pool pump 24 7?

How Long Should I Run My Pool Pump For? Ideally, you should run your pump for 24 hours a day, but we know that's unrealistic (and pricey), so let's look for an answer that keeps your pool clean and your wallet full. Generally running your pool pump for 12-hours a day is a good option.