How do I get rid of the GREY ring in my toilet?

Sprinkle 1/4 cup of Borax into the toilet bowl, and swish it around with a toilet brush. Add 1 cup of vinegar. Swish around again. And let the mixture sit in the bowl for about 20 minutes.
Takedown request   |   View complete answer on theindependent.com


What causes grey ring in toilet?

Toilet bowl ring can be caused by a wide variety of factors but we will break down the 2 most common issues, including but not limited to: (1) microorganisms and (2) hard water, or most likely, the combination of both. The growth of microorganisms (bacteria, fungi, mold, mildew, etc.)
Takedown request   |   View complete answer on everflush.com


How do I get rid of the ring around the toilet bowl?

Well, if you've just spotted a toilet ring, you can use baking soda and vinegar to remove the ring in an almost effortless manner. Baking soda, also known as sodium bicarbonate, is a great cleaning agent for many household surfaces, and when combined with vinegar, the duo's cleansing power is doubled!
Takedown request   |   View complete answer on maidforyou.com.au


Does WD 40 Remove toilet rings?

You can use WD-40 to break down tough lime stains or hard water lines in your toilet bowl. First, spray a small amount of WD-40 into the bowl, let it sit for a few minutes, then scrub the stains or water lines with your toilet brush. After flushing your toilet, the stains should disappear. Pretty crazy, right?
Takedown request   |   View complete answer on littleupgrades.com


Does vinegar and baking soda remove toilet bowl stains?

Baking soda and vinegar are two of the most useful household products that can be used to clean many things, including hard water stains in the toilet.
Takedown request   |   View complete answer on thespruce.com


Recurring Toilet Ring - Top 3 Solutions tested - Problem Solved



How do I get my toilet bowl white again?

How do I get my toilet bowl white again?
  1. Baking soda. Sprinkle baking soda into the toilet.
  2. Vinegar. Apply white vinegar over the baking soda.
  3. Brush. Use a toilet brush to scrub the toilet.
  4. Flush. Flush the toilet a couple of times to rinse.
  5. Borax & lemon juice. ...
  6. Let it sit. ...
  7. Pumice stone.
Takedown request   |   View complete answer on mymarvelousmaids.com


Does Magic Eraser remove toilet bowl ring?

Magic Eraser

Cut a piece of Magic Eraser and let it float in the bowl overnight. Don't use the toilet until morning. By then, the toilet ring will disappear.
Takedown request   |   View complete answer on sunrisespecialty.com


Why does my toilet get a ring so fast?

Why Does my Toilet Get a Ring So Fast? The bacteria is called anaerobic because it does not use oxygen to sustain life. Serratia Marcescens also causes stains in the tub, behind or around the sink faucet, at the bottom of shower curtains, or wherever surfaces are moist or water pools for a period of time.
Takedown request   |   View complete answer on pattersonplumbing.com


How do you get stubborn stains out of a toilet?

Here's what you need to do:
  1. Grab the Borax and pour ¼ cup into your toilet bowl. Then, using a toilet brush, swish it around.
  2. Add 1 cup of vinegar. Allow the solution to sit in your toilet bowl for about 20 minutes.
  3. Use a toilet brush to scrub the bowl clean and eliminate any remaining stains.
Takedown request   |   View complete answer on build.com


Does Magic Eraser damage porcelain?

Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
Takedown request   |   View complete answer on castle-keepers.com


Does Coke really clean toilets?

That's right. The fizzy drink can actually remove hard-to-clean stains on the inside of a toilet bowl. You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating.
Takedown request   |   View complete answer on cnet.com


Does Coke remove limescale from toilet?

Pour Coca-Cola along the edges of the toilet bowl — the carbonation will take care of the heavy lifting for you! Leave the soda in the toilet overnight. The next morning, flush the fizz away and your toilet will look good as new.
Takedown request   |   View complete answer on today.com


How do you get rid of thick limescale in toilet?

How to Remove Limescale with Vinegar:
  1. Get 1 litre of undiluted white vinegar and pour it into the bowl. ...
  2. Now, it's waiting time. ...
  3. Using a toilet brush or a scrubbing sponge with more white vinegar, scrub ot the toilet bowl.
  4. Flush to remove all residue.
  5. Repeat until your toilet is sparkling like new!
Takedown request   |   View complete answer on thehappyhousecleaning.co.uk


How do you remove hardened limescale?

Soak a rag or a cloth in vinegar or lemon juice and wrap it around your tap, ensuring all areas are covered. Secure the cloth with an elastic band and leave for an hour. Occasionally squeeze the cloth to release more of the acid onto the tap. Remove the cloth and wipe away the limescale.
Takedown request   |   View complete answer on mirashowers.co.uk


What dissolves calcium deposits in toilet?

Muriatic acid is a strong hydrochloric-based acid, that is a great descaler. Because of the intensity of this acid, it has the ability to remove severe lime and calcium deposits found in pools and toilets.
Takedown request   |   View complete answer on plumbingkingsllc.com


What does vinegar do to your toilet?

Vinegar is safe and milder than caustic cleaners designed for the toilet, and those commercial cleaning agents can eat away the good bacteria in your septic system. To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl.
Takedown request   |   View complete answer on washingtonpost.com


Is baking soda safe for porcelain?

Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
Takedown request   |   View complete answer on plumbingsupply.com


Does bleach damage porcelain toilets?

Bleach does have an impact on the glazed finish. However, a third shared: "The bleach will eventually eat away at the porcelain and damage any plastic and chrome fittings. "Toilets should be cleaned with warm soapy water and dried with an old towel. The occasional bleach and quick flush is ok."
Takedown request   |   View complete answer on the-sun.com


What should you not clean your toilet with?

Cleaning Mistakes

Bleach is corrosive, so when we drop these tablets in the tank and forget about it, the bleach gets to work corroding the toilet gaskets and seals. In time, this will cause your toilet to fail.
Takedown request   |   View complete answer on mylesodonnell.com


Does vinegar damage porcelain toilets?

Vinegar as Cleaner and Deodorizer

Vinegar will not harm your toilet's tank, bowl or inner components. The substance is safe to use and removes dirt, grime and mineral stains, and it deodorizes toilets without the need for purchasing and using a commercial toilet cleaner.
Takedown request   |   View complete answer on hunker.com


Can you clean toilet with baking soda?

Also, make a simple routine part of your weekly cleaning: Sprinkle the toilet with cup of baking soda. Let it sit for 30 minutes, then spray or squirt with vinegar (a mild acid) to moisten. Scrub with a bowl brush and flush away [source: Niagara County].
Takedown request   |   View complete answer on home.howstuffworks.com


How do you get stains out of a porcelain toilet?

White vinegar and borax/baking soda
  1. Sprinkle baking soda or borax generously on the stained areas.
  2. Use the toilet brush to scrub a little bit and spread the powder around.
  3. Add approximately 1½ cup of white vinegar into the bowl.
  4. Leave the solution to work for 15-30 min.
  5. Rinse.
  6. Repeat if there are still visible stains.
Takedown request   |   View complete answer on fantasticservicesgroup.com.au


How do you get rid of GREY stains in a porcelain sink?

Steps to Remove the Marks:
  1. Begin by sprinkling baking soda over the surfaces that are marked. It may help to spray the sink lightly with water first, so the baking soda will stick. ...
  2. Spray the surface lightly with Windex.
  3. Scrub with a soft cloth or sponge until the stains are removed.
  4. Repeat as necessary.
Takedown request   |   View complete answer on howtocleanstuff.net


Does bleach whiten porcelain?

Bleach. Another way to whiten porcelain is by using bleach. Bleach is a whitening agent, so it can only be used if your porcelain is plain white.
Takedown request   |   View complete answer on thecleaningcompany.ca