How do I get my bathtub white again?

Make a bathtub cleaner paste of one part hydrogen peroxide to two parts baking soda (or cream of tartar). Rub the paste on the stain and let stand for 30 minutes to one hour, then wipe and rinse. If necessary, repeat until the stain is gone.

How do I get my old tub white again?

Get the gunk off old enameled bathtubs and sinks by applying a paste of 2 parts baking soda and 1 part hydrogen peroxide. Let the paste set for about half an hour. Then give it a good scrubbing and rinse well; the paste will also sweeten your drain as it washes down.

How do you clean a badly stained bathtub?

Combine two parts vinegar and one part water in a spray bottle and spray the entire bathtub. Allow this soaking solution to sit in the tub for 15 to 20 minutes. For tough stains: place a towel soaked in a vinegar and baking soda paste or hydrogen peroxide onto the stain(s) and allow the towel to sit for up to one hour.

How do you fix a discolored bathtub?

Fill a spray bottle with vinegar. Apply the vinegar liberally over the stained area. Wait about 20 minutes, then wipe away the stain with a sponge. Rinse with warm water.

Why did my tub turn yellow after bleaching?

A. Household bleach is an alkaline material and consequently will precipitate iron out of water. It sounds like that's what happened since iron stains are rust colored. A mildly acidic household product made for removal of iron stains should take care of it.

DIY Bathtub Cleaning | How to Clean Old Porcelain Tub | Fast

Why is bathtub discolored?

These stains are caused by iron content in the hard water; the iron rusts, which is why the color looks rusty. You can also typically be clean these stains away, perhaps with the help of vinegar (another possible reason for rusty stains is that your water pipes are rusting).

Does WD 40 clean bathtubs?

WD-40 is great for quieting squeaks and greasing doors. However, it can also be an excellent bathroom cleaner.

How do you remove yellow stains from porcelain tub?

If you have a porcelain tub, pour a little bit of Ajax or Comet directly onto the bathtub stain (enough to cover it completely). Add a little bit of water and scrub using the abrasive side of a sponge. If you rinse the affected area and you still see a stain, use a pumice stone to lift the remainder of the stain.

How do I get my tub white again Reddit?

i'd dry the tub, coat a layer of that on the stains and let it sit over night. then i'd throw some drain cleaner powder on it, mix and sit. after a few treatments, it's much better. it's almost like a teeth whitening program.

How do you whiten a porcelain tub?

Soak a non-abrasive sponge in the baking soda/ammonia solution and scrub the surface of your porcelain bathtub or sink, paying particular attention to stained areas. Dip the sponge in the solution, scrub and repeat until you're satisfied.

How do you clean a bathtub with vinegar and Dawn?

Can I use Bar Keepers Friend on fiberglass tub?

Bar Keepers Friend cleans porcelain, tile, fiberglass, and more. Our products have even been known to save customers from having to replace their tubs and shower tiles. It's often considered one of the best bathtub cleaners.

Why does my bathtub turn yellow?

Fiberglass bathtubs may start to turn a yellowish color as a result of soap scum or hard water. These stains can be very difficult to remove. However, a mixture of cream of tartar and hydrogen peroxide will easily remove any stain and restore the tub to its original white color.

What should you not use WD-40 on?

There are many different types of plastic, but there are two kinds that you should avoid using WD-40 on—polycarbonate and clear polystyrene plastic. Polycarbonate is a transparent plastic that is commonly used in greenhouses, and polystyrene is typically used for styrofoam and soft drink lids among other items.

How do you get stains out of a white enamel bath?

In order to clean your enamel bath a mixture of water and white vinegar will be sufficient. If there are tougher stains sprinkle a little baking soda followed by the vinegar and water solution. After applying the solution, leave to settle for a few minutes then wipe with a soft cloth to reveal the gleam.

Does WD-40 damage acrylic?

Here are ones to avoid: Any ammonia based cleaner e.g. window and glass cleaners. ​Abrasive or caustic cleaners. WD-40 or any other petroleum-based chemical.

Does peroxide remove stains?

Hydrogen peroxide is a very effective stain remover for protein- and plant-based stains. And it works well in treating mildew, blood, fruit and vegetable, and dye-transfer stains.

How do you whiten a yellow tub?

Hydrogen Peroxide: fill a spray bottle with 3-percent hydrogen peroxide. Let the solution sit for 10-15 minutes and then wipe the tub down with a damp sponge. You can repeat these steps until the yellow staining disappears.

What should you not use Bar Keepers Friend on?

Are Bar Keepers Friend and Comet the same?

Bar Keepers Friend is safe on glass and ceramic tiles, but Comet is not. Both brands contain granules and are abrasive cleaners, but the granules in Comet are larger and more likely to scratch surfaces. Bar Keepers Friend is an acidic cleaner, whereas Comet is a bleach-based cleaner.

Can I mix vinegar baking soda and Dawn?

Heavy-duty floor cleaner — Mix ¼ cup distilled white vinegar, 1 tablespoon liquid dish soap and ¼ cup baking soda in 2 gallons of warm water.

Why should you put dawn in your bathtub at night?

That's right: Grab your dish soap and a broom, and you might be as pleasantly surprised as we were to learn that Dawn is apparently just as effective at banishing bathtub scum as it is at removing all that grime and grease from your dishes and pans. Plus, this technique is equal parts simple and fast!

Can I mix white vinegar and Dawn dish soap?

In a microwavable safe glass container, mix ⅓ cup Dawn dish soap with 3 cups white vinegar. Microwave for five minutes until simmering. Spread the mixture in sink basins, bathtubs and showers.