How do I clean my Pebblecrete pool?

How do I remove stains from my Pebble Tec pool?

Keep stains from forming on the pebble finish of your Pebble Tec pool by using a pool stain remover. Pebble Technology recommends purchasing The Purple Stuff from JacksMagic.com. This product is approved for use on the Pebble Tec finish.

Should you acid wash Pebble Tec pool?

Because of the Valley's hard water and high summer pool evaporation, we recommended you drain and acid wash your pool every two to four years to help remove excess calcium, algae and other contaminates that may lead to interior pool staining and that unsightly white ring on your pool tile and pebble-tec surface.

How do I get algae stains off the bottom of my pool?

Mustard algae and most yellow/brown algae will like the bottom of the pool. The fastest way to get rid of these stains is to apply chlorine straight onto the discoloration. Scrub with a brush and watch it disappear. Run a water test to see what other stuff might be in the water, and treat accordingly.

How do I get dirt off the bottom of my pool without a vacuum?

Pebblecrete pool

Should you vacuum algae out pool?

It's important to note that you should not try to vacuum green pool water until you have removed any and all organic debris using a pool net, and have added the proper chemicals to the water, and done proper brushing so that the green algae has visibly settled to the bottom of your swimming pool.

What causes brown stains on bottom of pool?

And brown stains concentrated on the bottom can likely be attributed to dirt stains, typically enhanced by calcium buildup. The first step to deal with organic materials is to shock your pool, and scrub it. This will take care of organic material present in the pool, and the scrubbing will take care of the stains.

What are brown spots on bottom of salt water pool?

Organic Stains

This can either mean organic materials such as leaves that have stayed at the pool's bottom for some time or algae buildup. If the color is more of a brown-black, usually spotted on the pool sides, this might mean that a metal substance is staining your pool.

Can I pressure wash Pebble Tec?

As with any pool, a Pebble Tec pool needs to be drained before you clean it. Once drained, take the opportunity to survey it carefully for loose pebbles or cracked spots. You'll be pressure washing the Pebble Tec pool on very low pressure, so you'll need to use soap to loosen up the dirt before you start.

Can you use pumice stone on Pebble Tec?

Yes you can. However we don't recommend using pumice stones. Cleaning with a pumice stone takes a lot of time and effort. Depending on the amount of calcium build up this could take hours and hours over several weekends.

How much does pool acid wash cost?

Average pool acid wash cost is $202, cost ranges between $178 to $225 for a pool measuring 500 square feet, according to Improvenet.com in the US in 2020. Of course, prices will vary based on location, size of the pool and the time of the year.

How do you maintain a Pebble Tec pool?

brush your pool. It is recommended that you brush a PTI pool finish three times a day for the first three days and two times a day for the next ten days. Using a standard, nylon (very important) bristled pool brush. Brush the walls and the floor of the finish toward the main drain.

Why does my pool floor look dirty?

If dirt is reappearing at the bottom of your swimming pool after you've vacuumed it your pool's filter may be working poorly. Pool filters often work poorly because they're in need of cleaning. If you have a sand filter for your pool you need to make sure that the sand is sharp and freshened up.

Can you shock a pool while vacuuming?

Although vacuuming should be combined with pool shocking, it's better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.

What setting do you put your pool filter on when vacuuming?

If you vacuumed on waste, you will need to turn your filter to the “rinse” setting, turn on the pump and let it run for about 30 seconds, and then turn the pump back off. Make sure to set your filter back to “filter” after you do this.

Can I put bleach in my pool?

Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.

Can you use a shop vac to clean bottom of pool?

Although you normally clean your pool with a manual pool vacuum or a vacuum device often called a "creepy crawler,'' you can clean it with a standard wet/dry shop vac. The disadvantage to this method is it takes a long time because you have to repeatedly empty the water from the shop vac.

How do you acid wash a pool without draining it?

Does acid wash damage pool?

If you regularly clean your pool and keep it in good shape, chances are you will only need to acid wash your swimming pool every 5-7 years. Because acid washing uses harsh chemicals, it is not recommended to get your pool acid washed more frequently than that, as the harsh chemical used can damage your pool's surface.