How do I change the IP address on my Reolink camera?

How do I find the IP address of my Reolink camera?

Step 1. Download the free Reolink software on your phone or PC. Step 2. Come to its device settings, and then find the security camera IP address on the Network Status tab.

What is the default IP for Reolink camera?

In our test, the default IP address of the camera we use is 192.168. 177.100, and now you need to change your computer's IP address to 192.168. 177.

Why won't my Reolink camera connect to my router?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

How do I connect my IP camera to my network?

How to Find the IP Camera Address

How do I change my Internet connection on my Reolink camera?

Note: Make sure that the camera is powered on. Step 2: Launch Reolink App and log in to the camera, then enter the Device Settings->Wi-Fi interface. Step 3: Select the Network you would like to connect your camera to, then input the password and click Save button.

How do I reset my Reolink wireless camera?

How do I get my Reolink camera back online?

Press the Reset button and hold on, then power on the camera while pressing the Reset button. Step 3. Hold for about 10 seconds then release the Reset button. After reset, your camera will return to factory default settings, then you can log in with the default username and password.

Are Reolink cameras IP?

Reolink PoE security cameras are also HD IP cameras, for delivering 12MP, 8MP, 5MP or 1440P high definition videos for greater clarity, even at night.

How do I check what my IP address is?

What is the admin password for Reolink camera?

Reolink default username is admin and the default password is blank(no password). If you forget the password, you may choose to reset your device. Note: For Reolink NVRs, you may press the reset button or use super-password to reset the admin password to default.

Can you set a static IP on a Reolink camera?

You cannot set a "static IP address" for battery-powered cameras.

Can I reset my Reolink camera remotely?

Reolink camera/NVR can't be switched off remotely, but you can restore/reboot the camera/NVR remotely when you can still connect it.

Why does my Reolink camera Say connection failed?

Solution: Please make sure all the UDP ports of this camera in your router are enabled, if you don't sure how to check it, please contact your router or internet provider about it. Check the firewall settings of the router to see if the remote access is blocked. Please disable the firewall on the router.

How do I reset my Argus Reolink camera?

How do I change my WiFi Reolink NVR?

If you want to connect the NVR to your router via WiFi, please go to the NVR WiFi Setting page, then select the "Station" mode. After that, you may connect the NVR to your router's wifi. And the SSID and Password (Station mode) in the picture below will be your router's WIFI SSID/Password.

How do I connect to an IP address?

How do I reset my Chinese IP camera?

Many IP cameras have reset button, just press reset button for 5-10 seconds, the camera will automatically reset to factory status. For IP cameras don't have reset button, you can use software/utility to reset IP camera to factory default when something goes wrong.

Why does my IP camera say offline?

Your wireless ip camera may lose connection with our servers or the internet on some occasions. There are several reasons why your camera may be offline, including a depleted battery, high bandwidth usage, updated router settings, or wireless interference.