How do I add chlorine to my pool for the first time?

Tips for Adding Start-Up Pool Chemicals

Add one chemical at a time, using a pool brush to distribute. Run filter pump while adding chemicals to circulate. Re-test the pool water after 8 hours of filter run time. Add chlorine shock when the sun is not directly overhead.

How much chlorine do I add to my pool for the first time?

If you're adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.

What to do when you first fill your pool?

Can I add chlorine directly to pool?

The method to add dry, granular chlorine to a swimming pool is relatively straightforward. You just need to measure the chemical, dissolve it in a bucket or similar container, and add the mixture around the perimeter. Take care never to add chlorine directly to the skimmer.

Should the pool pump run when adding chlorine?

Make sure you test the water to ensure that chlorine levels are not too high before going for a dip. You should be running your pump at the same time you are waiting. For example during an algae treatment, it is 24 hours (Or until the chlorine is below a 5 ppm).

How much chlorine do I add to my pool for the first time?

Is it better to put chlorine tablets in skimmer or floater?

A better method is adding chlorine tablets directly to your swimming pool skimmer. When your filter is running, water will move quickly over the tablets in the skimmer basket, dissolving them much more effectively than the floater does.

Should you shock a new pool?

When opening your pool in the spring – When a pool is first opened, the chlorine level normally needs an immediate boost, and shock is the quickest and easiest way to accomplish this. If the chlorine level is already adquate, a non-chlorine shock may be used to treat the water.

Is shock the same as chlorine?

Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.

How do you put chemicals in an above ground pool for the first time?

Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. It's recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool. You can also add more chlorine at the end of the opening process.

How soon after filling a pool Can you swim?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

How do you start a new pool?

Do I add chlorine everyday?

Chlorine sanitizer should not be put in your hot tub every day. Instead, it should be added 2-3 times per week depending on the frequency the tub gets used. Then about ¼ cup of chlorine shock should be added every 7-10 days. The amount of sanitizer to add depends on where the chlorine levels read on a test strip.

Should I shock my pool before adding chlorine?

In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero. The chloramines or combined chlorine level rises above 0.5 parts per million (ppm).

Can I just throw chlorine tablets in my pool?

NEVER just throw them into your pool water. This will cause them to dissolve on the floor and it can damage and create a permanent bleach stain to your liner or concrete.

How long after putting chlorine tablets in pool Can you swim?

Generally you will want to wait at least 4 hours, but ideal is waiting for one complete turnover of the water (the time it takes all the water to go through the filter).

Should I run my pool pump during the day or night?

It is best to run your pool's pump during the day when the sun is out to reduce the risks of algae bloom and because there is generally more debris and contaminants that will enter your pool in the day.

Should you turn off your pool pump at night?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

Is it OK to run pool pump 24 hours a day?

A Rule of Thumb

Generally running your pool pump for 12-hours a day is a good option. This is based on the assumption that your average pool pump has a turnover rate of about 8 to 12-hours. That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period.

How many chlorine tablets do I put in my pool?

Add one tablet for every 5,000 gallons of water and always round up. For example, if your pool has 21,000 gallons of water, add five tablets per week. If it has 8,000 gallons, use two tablets.

How do you treat water in a new pool?

How much chlorine do you put in a pool per gallon?

The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.