How can I refinish my deck without sanding?

If you're wondering how to restain a deck without stripping or sanding the old stain off, we can help. To avoid stripping or sanding the old stain off your deck, thoroughly clean and rinse it, and then let the wood dry for 24 to 48 hours. Apply the same (or darker) stain color or tint from the same manufacturer.

Can you recoat a deck without sanding?

No need to remove all deck paint without stripping, but scuff sanding is recommended before repainting, allowing new paint to grab and hold even better. So there you have it! Great news if your current deck paint is holding up, needing an additional coat. You only need to give it a good scuff sand first.

Do you have to remove all old stain before restaining a deck?

You do not ALWAYS have to strip off old stains when staining a previously stained deck if you are applying the same stain type, color, and brand as the old one. Since deck stains penetrate deep into the wood, they prevent moisture buildup and protect your deck from mold UV rays and rot.

Is sanding necessary before staining a deck?

Once dry, these wood fibers can remain raised and may cause splinters. For this reason, light but thoroughly sanding your wood deck is a necessary step before staining or sealing. This crucial step will ensure that your refinishing job gives great results.

What happens if you don't sand deck before staining?

Do I need to sand the deck before staining? The answer to this is “it depends.” You won't hurt the deck by applying a light sanding. It really depends on the age of the decking and it's condition. Sanding is more for the feel of the deck than to prepare it to accept a new stain.

How To Restore A Worn-Out/Weathered Deck

Can you Restain a deck over old stain?

Can I stain over a stained deck? If your deck is in good condition and you're looking to apply a maintenance coat to keep your deck looking new, then yes… you can stain over a stained deck. It's the same if the surface of your boards are starting to look really worn and faded. Applying more stain won't hide the damage.

Is it better to sand or strip wood deck?

Sanding is preferable where less penetration is required and the deck is flat, but the process requires additional labor and time to achieve consistent results. A stripper can often be the best option for larger decks, even though the cost will be significantly higher.

Should you pressure wash deck before staining?

There is a common misconception that just pressure washing a deck prior to staining is all you need to do in order to prep your deck for stain. Pressure washing can help, but if you want your stain to last, using a good deck cleaner and brightener on the deck prior to pressure washing will provide you the best result.

Can I stain over stain without sanding?

Can you restain wood without sanding? While some light sanding may be advised for almost all stain projects, it is possible to avoid heavy sanding and stripping of existing stain. Using a gel stain means that you can avoid the heavy sanding and stripping usually required by traditional staining projects.

Can you stain over already stained wood?

If you are unhappy with an existing wood stain you can stain over it, provided that you are willing to go a shade darker. Applying a light stain to a dark stain will make little difference if any at all. However, choosing to stain over a light stain with a darker wood stain will work just fine.

Can you paint over stain on a deck?

A stained deck can be easily painted over or given a new shade of stain by dulling the old finish with sandpaper, wiping down the deck with de-glosser, and then priming and painting or topping with the new shade of stain.

Can I use a belt sander on my deck?

Can you use a belt sander on a deck? Using a belt sander on a deck is one of the great ways to sand your deck. So 'yes” I would definitely use a belt sander on a deck. Just make sure you go in the direction of the timber.

What can I cover my old deck with?

If you want to completely cover your old deck, composite decking is a good option. Composite decking is made of a mix of wood and plastic, so it is very weather-resistant. It also doesn't require any staining or sealing, which makes it low-maintenance.

Do you sand or clean deck first?

3) Sanding Your Deck

When the deck is dry (36-48 hours after washing, depending upon humidity and weather conditions), it's time to sand the surface. You can use a pole sander with 80-grit sandpaper to remove all the loose wood fibers that were lifted by the pressure washing.

How soon after power washing Can I stain my deck?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry. Now let's talk about specifics. Cleaning your deck is an all important first step in the staining process.

How long after power washing can you seal a deck?

Sand Your Deck Before Sealing

After you've pressure washed your deck, you'll need to wait for it to completely dry. Sometimes, this can take as long as 48-hours. Once it's dry, you'll want to sand your deck lightly. This is necessary to remove any splinters or fuzzy patches that pressure washing can cause.

Does sanding ruin pressure treated wood?

Sanding pressure-treated wood is actually contraindicated because, as Sand & Stain warns, you'll end up partially removing the protective coating created by the pressure treatment, and the wood will look terrible.

Can you power wash stain off a deck?

Pressure washing is a quick way to remove a deck finish, but it requires some care so as not to damage the deck. A pressure setting of 1500 psi should be strong enough to clean away deck stain.

Do you have to sand a deck after power washing?

Deck sanding – this task is essential when it comes to the maintenance of your deck, especially after cleaning it or before staining/sealing it.

Why does my deck stain peel every year?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.