How accurate is ecobee temperature?

The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds. It will use the previous two values and average them into the current reading.

Why is my ecobee temperature wrong?

If your Ecobee sensor is not displaying the correct temperature, it is likely that it either needs to be recalibrated, is not properly placed, or needs to have the batteries replaced in the device. You can check the status of the sensor from your thermostat or accompanying smartphone app.

Can you calibrate an ecobee thermostat?

Go to the menu on your Ecobee screen. Select 'Installation settings' from the 'Settings' menu. Now go to 'Thresholds' and select 'Temperature Correction'. You can adjust the temperature to what you see fit.

How does ecobee average temperature?

Your ecobee smart thermostat will attempt to heat or cool your house to approximately 71 degrees as a middle ground. The more room sensors you have — which you can pair up to 32 with one thermostat — the more information your ecobee thermostat has to calculate a comfortable average.

How does ecobee calculate temperature?

The ecobee smart thermostat uses remote sensors to monitor multiple rooms in your house. They work by analyzing the temperatures of the space and averaging the values for your whole home. The 'follow me' feature can adjust to match your preferences as you move from room to room throughout the house.

Smart Thermostats: what I WISH I knew earlier…

How do I calibrate my ecobee sensor?

Do ecobee sensors really work?

The sensors really work. We use the follow me feature and every room that is occupied is the temp we set. Pros: It works, it is fun, and saves on energy costs! Another pro is the sensors! I have sensors all over my house and use them to help get the most accurate average temperature reading of my house.

Does ecobee take average of sensors?

Using occupancy-based algorithms, your ecobee will prioritize the temperature control in spaces where it matters most. If more than one sensor detects motion, your ecobee uses the average of each of your sensors that you've selected to participate.

Where should I put my ecobee sensor?

ecobee recommends placing the sensors about 5 feet high for optimal temperature measurement. For optimal motion detection, sensors should be aimed at doorways and seating areas. The sensors should be oriented so that the little bee is facing up and to the right (just like the picture below).

Does ecobee read humidity?

Our thermostats themselves have built-in sensors to measure temperature, humidity and occupancy (ecobee3 and ecobee4 only). You can view these sensors values by device.

How do I optimize ecobee?

Why does ecobee take so long to calibrate?

All you have to do is wait. Ecobee also performs firmware updates regularly; an update may cause your thermostat to recalibrate. This may take slightly longer than a regular calibration. If your device is calibrating for more than an hour, contact Ecobee customer service for additional support.

Is ecobee owned by Amazon?

Amazon is backing Ecobee, a smart thermostat company, just days after buying Ring. Energy Impact Partners and Amazon Alexa Fund are among the investors in a $62 million round of funding for Ecobee. Toronto-based Ecobee makes smart thermostats that compete with Nest and Honeywell products.

Why is my ecobee warm?

There are several possible causes for an ecobee smart thermostat blowing hot, or cold, air when it shouldn't be. These can include HVAC problems, ecobee wiring issues, and settings that cause the ecobee to blow air more frequently.

How long does an ecobee thermostat last?

Ecobee thermostats can last up to ten years, but of course, how long they last depend on how frequently you use them.

How do I calibrate the temperature on my Nest thermostat?

How many ecobee sensors should I have?

If your home has multiple floors, ecobee recommends that there be at least one Room Sensor per floor to ensure that temperatures are averaging properly.

How do I prioritize my ecobee sensor?

Tap and hold your finger on the number to the right and drag it to set the desired indoor temperature that you want your thermostat set at when you're not at home.

How often do ecobee sensors update?

The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds. It will use the previous two values and average them into the current reading.

What does sleep mean on ecobee?

These tell your ecobee how to organize your day – periods that you're asleep, that you're home, that you're away, etc. The ecobee comes with three default activities: Home (blue icon) Away (purple icon) Sleep (grey icon)

How does ecobee know outside temperature?

The thermostat finds the closest weather stations and then uses an algorithm to interpolate the data based on geography to derive weather for your (very specific) location.

How does ecobee know a room is occupied?

Both the Ecobee Room Sensors and the newer Smart Sensors can detect motion and become occupied when using one of the smart modes. The thermostat itself also measures room occupancy. It works similarly to the remote sensors.

Can a smart thermostat detect room occupancy?

Smart thermostats can't detect room occupancy on their own. They require motion sensors that get the job done in this regard. But once you pair a smart thermostat with a high-end motion sensor, it can automatically adjust the temperature levels of different rooms in the house based on occupancy.

How low can you set an Ecobee thermostat?

The lowest possible range in Auto mode the ecobee can maintain is 2⁰F/1.1⁰C.