Does ZF make good transmissions?

The ZF 8 Speed transmission has an overwhelmingly positive reputation within the automobile industry. Its highly flexible design means that the ZF transmission

ZF transmission

Efficiency improvements over the original design include a wider ratio spread of 7.8:1, reduced drag torque from the shift elements, reduction in required oil pump pressure, and broadened use of the coasting and start-stop systems. ZF estimated fuel economy improvement over 1st generation 8HP kits to be 3%.

https://en.wikipedia.org › wiki › ZF_8HP_transmission

ZF 8HP transmission - Wikipedia

can be used within a huge number of car models, ranging from expensive sports cars to luxury sedans.

Why is the ZF 8 speed so good?

Beyond performance, the eight-speed's appeal is rooted in its versatile modular design. It can accommodate a maximum torque output from as low as 162 pound-feet up to 770. It is compatible with a variety of all- and four-wheel-drive systems, such as an integrated center differential or a two-speed transfer case.

What cars come with a ZF transmission?

The BMW M5. The Jeep Grand Cherokee Trackhawk. The Rolls-Royce Phantom. Though these cars are all different, there's one thing they (and many other cars) have in common: ZF's 8HP eight-speed torque converter automatic transmission.

Is the ZF 9 speed transmission reliability?

Transmission manufacturer ZF has issued a recall of its nine-speed automatic transmission. This recall affects approximately 505,000 cars, many of which are on U.S. roads. This particular transmission has the unfavorable habit of unexpectedly shifting into neutral during driving.

What is the strongest automatic transmission?

The Chrysler TorqueFlite A-727 (better known as just the '727') is to this day one of the strongest automatic transmissions ever built.

The World's Best Automatic Transmission - How Autos Became Cool Again

Is ZF8 better than DCT?

ZF8 will be closer to DCT, and almost unnoticeable on upshifts, but downshifts are always going to be 'blends' rather than real cog swapping IMO. ZF won't be as good as a DCT.

Does Audi use ZF transmission?

Audi will widely use an eight-speed automatic transmission produced by ZF, instead of a six-speed unit on cars sold in the United States, according to AutoWeek.

Which car manufacturer has the best automatic gearbox?

Does Ford use ZF transmissions?

Ford has been using the ZF6 since the late 1990s. Ford's configuration uses a unique internal oil pump to pump lubricating oil to an external oil cooler, much like that of an automatic transmission, to dissipate the heat generated during heavy-duty use or towing. It also uses a different input bearing.

Are BMW transmissions good?

Simply put, no. There is nothing to suggest that in general BMW automatics are any more or less reliable than their manual transmissions. Just looking at how many used BMWs are for sales with more than 200k miles suggests that major drivetrain problems are not common.

Which cars have the best transmissions?

How often should you service a ZF gearbox?

The German top manufacturer of transmission ZF recommends oil change every 8 years or 100,000 km. The oil change interval is actually set by the type of the transmission and also by the strength, or how long it is designed to be.

Is ZF 6hp reliable?

All that said, the transmission has proven to be very reliable. People in the 335i community are putting well over 500 ft-lbs of torque through them and they seem to be holding up, and my car has 211,000 miles and it shifts the same as it did when I got it with 40,000 miles.

Who makes transmissions for BMW?

If you weren't aware, BMW does not manufacture their transmissions. Instead, General Motors and ZF are the two major suppliers for automatic transmissions for BMW vehicles.

Which Audi use ZF transmission?

Audi's top-of-the-line 2011 A8 has been fitted with ZF's whiz-bang eight-speed automatic transmission, catching up to rivals like BMW that has already installed the advanced transmission in several of its models.

Is the ZF transmission dual clutch?

The dual clutch transmission from ZF enables lightning-fast gear changes under load without interrupting the torque. It is thus ideally suited for vehicles with dynamic/sporty designs.

Why did BMW stop DCT?

The real reason is that the ZF eight-speed is more efficient and easier to calibrate for ultimate efficiency. And because efficiency is more important than almost all else in today's automotive climate, the DCT is a casualty of the times. There's also the fact that BMW M will soon be making a jump to electrification.

How much power can the ZF 8 speed handle?

The ZF 8 Speed transmission can accommodate a maximum torque output from as low as 300 newton-metres up to 1000 newton-metres. The torque converter can even be swapped out for an electric motor – creating a hybrid option that will still carry significant power.

Is ZF 8 dual-clutch?

The ZF 8HP45 is not a dual-clutch transmission, but rather a traditional torque-converter automatic. However, the lightweight internal components reduced internal drag, and the advanced valve body allows the 8HP to shift nearly as fast as a DCT but without the complex and expensive design.

What is the best transmission of all time?

#1: TH700R4 (a.k.a. 4L60 / 4L60E) The TurboHydramatic 700R4 transmission is, in our opinion, the finest automatic transmission ever made, yet has one of the most checkered pasts.

What is the most reliable truck transmission?

The Allison 1000 transmission, equipped in 2001 to present Chevrolet and GMC trucks of all types, is the single King of the transmission world.

Why is Allison transmission so good?

Allison Automatics have minimum maintenance requirements, meaning less downtime and lower overall maintenance costs. Since Allison Automatics use a torque converter instead of a dry clutch, irritating clutch repairs and replacements that come with manual and automated manual transmissions (AMTs) are eliminated.