Does Thompson Water Seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Does Thompson WaterSeal peel?

Wear/Tear and Peeling: 8

The Thompson's WaterSeal clear waterproofer penetrates deep into the wood. There was no peeling or wearing.

How long does Thompson's water Seal last?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years. This is dependent on conditions such as orientation of the wall and local climate.

How do you remove Thompson Water Seal from wood?

Is Thompson Water Seal good for wood?

Yes, you can use Thompsons Water Seal on pressure treated wood. You just need to be sure the treated wood is dry enough to take the sealer. Some, such as Thompson's WaterSeal Waterproofing Wood Protector, advocate waiting 30 days before applying on new pressure-treated wood.

Thompson’s WaterSeal Review, Does It Work?!

What's better than Thompson's water seal?

Why is my Thompson water seal sticky?

If the weather is too cold, your Thompson water seal layer will just stay there and not dry as it should. Ideally, the sealant will dry best in temperatures above 50°F. If the thermometer units dip below this level during or soon after application, the deck may stay sticky for longer than 24 hours.

Why did my deck stain peel?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.

Can I sand off Thompson's Water Seal?

Be sure that the sealant has dried first before sanding. If you have a pressure washer, another option is to use a sandblast kit to sandblast the concrete and remove the sealant. If you want to use a Thompson's WaterSeal Waterproofer on your concrete, use the Multi-Surface version.

Why is my deck sticky after sealing?

"A sticky or tacky deck is usually due to over-application or failing to wipe the excess stain from the surface of the wood. We recommend our Penofin Pro-Tech Cleaner Step 2. This is a product that comes in powder form. You mix 1 cup to a gallon of water, wet the wood and apply the solution to the wood surface.

Can you apply two coats of Thompson's water Seal?

Deck Sealing and Staining Tips

Thompson's WaterSeal products typically need only one application, but you can apply a second coat of stain to darken the wood, if desired. However, you must wait for the first coat to dry (typically about 2 hours) and apply the second coat within 4 hours of applying the first coat.

Is it better to stain or seal a deck?

Deck sealing will protect the wood from splitting, cracking, moisture, mildew, and rot while maintaining the color and grain of the wood. A stain will protect the wood and provides a more uniform tint or color to the wood to complement surrounding structures.

What is the best way to apply Thompson's water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

Is Thompson's Water Seal oil or water based?

Thompson's^® WaterSeal^® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson's^® WaterSeal^® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

What happens if you put too much stain on a deck?

You'll know if you've over-applied your deck stain because there will be sticky patches or puddles that just aren't drying—the wood has absorbed all it can so the remaining stain has nowhere to go.”

Is Thompson water Seal acrylic?

Thompsons WaterSeal Deck & House 100 Percent Acrylic Latex Waterproofing Solid Stain, Russet 16141 enhances the natural beauty of wood by adding exceptional fade resistant beautiful color that hides the wood grain while allowing wood texture to show. This formula is available in 67 rich tones.

How long does it take for Thompson water Seal to dry?

Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

How do you clean up after using Thompson's Water Seal?

Don't use a metal sprayer or container — most cleaners are corrosive to one degree or another, and will react with the metal! After waiting the recommended time, use a synthetic, stiff bristled brush to scrub the surface. Then use a garden hose or pressure washer to rinse away the residue.

Is Thompson water Seal supposed to be white?

Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off. Tackiness will result if over-applied. May also occur after application if overnight temperature falls below 40°F within 48 hours of application.

What deck stain will not peel?

A: Many experts agree that the best finish for pressure-treated wood is a semi-transparent stain. This stain penetrates the wood and won't peel, unlike some solid-colour stains, which sit on the surface like paint and can peel and flake under some conditions.

How do you fix peeling deck stain?

What to do if your deck is peeling?

How many coats of Thompson's water Seal do I need?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Does Thompsons water Seal dry?

DRYING TIME Thompson's Water Seal should be dry in 2 hours under normal conditions. Dry times depend on the texture & type of surface you're coating. Remove as much product as possible from equipment before cleaning. All equipment should be cleaned immediately after use with detergent and warm water.

What color is Thompson's water Seal supposed to be?

Thompson's^® WaterSeal^® Clear Multi-Surface Waterproofer applies white but dries clear and allows your wood to gray naturally over time. Prior to covering the entire surface, a test patch should be done in an inconspicuous place.