Does Hardie board warp?

HardiePlank® is a fiber cement based siding, so it's impervious to water, termites, woodpeckers, and any other animal you can think of. It's dimensionally stable so it won't warp like wood or vinyl siding can, and it won't melt or warp when heat is applied to it.

What are the problems with Hardie board?

Hardie Board Moisture Problems Caused By Cracking

Fiber cement siding is a hard, brittle product. One of the worst problems with Hardie siding is moisture damaged which can be caused by cracking.

Does Hardie board shrink and expand?

If Hardie is installed too close to these surfaces, there is a chance that the paint will start to bubble and peel. This happens because the boards are wet almost all the time, and the water in the board will start to expand and contract as the temperature changes.

What causes Hardie board to crack?

Improper handling - The boards—especially long ones—should be supported at both ends when moved. Fiber cement planks are floppy until secured on the wall and holding only in the middle or transporting over a shoulder will cause a dramatic sag at both ends. The stress can cause a crack at the center of a board.

Does Hardie board break easily?

Hardie siding is waterproof, fire resistant, and pest and insect resistant, which means that not only will the siding last, but it will protect the interior of your home for longer, without warping or breaking.

3 Common Installation Issues with James Hardie Siding

Does Hardie board deteriorate?

Absorptive claddings like fiber cement can hold moisture, leading to panel damage, rot, and even mold problems.

Should Hardie board be caulked?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

How often do you need to paint hardiplank?

Hardie Plank is also called fiber cement siding. While it's far heavier than aluminum, vinyl or wood, it is extremely durable and typically only needs a new paint every ten to twenty years for maintenance. It is one of the best materials and long-term solutions for protecting your home.

What are the disadvantages of fiber cement siding?

Fiber cement board has all the benefits of other sidings with few disadvantages. Installation of fiber cement board siding is costly. Labor costs are higher because fiber cement requires more manpower to deliver and install. Cost can be two to three times higher than aluminum or vinyl siding.

How long does Hardie board last?

Hardie Board siding is a greater financial investment than vinyl siding, but it lasts longer too. So as you consider this aspect of your decision, realize you will enjoy this outstanding siding for up to 50 years.

Can Hardieboard get wet?

James Hardie siding and trim products must be kept dry at all times prior to installation.

Can you pressure wash Hardie board?

The manufacturer recommends that you do not pressure wash your Hardie siding. The hard spray of water from the power washer can damage the surface of the siding. In fact, pressure washing fiber cement siding is one of the only ways you can damage this durable type of siding.

Should Hardie board be loose?

If you have loose HardiePlank siding on your home, it is important to fix it. Loose siding can leave your home unprotected from weather and insects. HardiePlank is fastened to the home by either blind nailing or face nailing.

Is Hardie siding worth?

James Hardie siding is a great, environmentally friendly choice for overall curb appeal and home value. It will give your home a new look and feel to it. It is an attractive choice with guaranteed durability and quality. It provides an amazing return on investment.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ''Materials Required'' in the backer installation instructions) every 8'' around the perimeter and all supporting studs. Keep fasteners between 3/8'' and 3/4'' from sheet edges and 2'' in from sheet corners.

Does caulking Hardie board void the warranty?

These such areas are called “field butt joints.” In the case of James Hardie's Color Plus siding, which has a pro-rated 15-year warranty, using caulk at field butt joints will flat out void your warranty!

Is Hardie board better than vinyl siding?

By contrast, Hardie® fiber cement siding is more durable and up to 5x thicker than vinyl siding. It easily stands up to the elements, resisting damage from wind, rain, freezing temperatures and hail, and gives homes years of protection with low maintenance.

How long does pre painted Hardie board last?

(The industry refers to this process as blow and go) And, the average paint life with that process is typically 6 to 8 years if the prep and application is performed correctly.

How do you maintain Hardie board?

Wash down the exterior surfaces every 6 to 12 months with a garden hose to remove dirt and debris, gently clean your siding with a soft brush or wet soft cloth in a side to side motion in the direction of the plank siding.

Can you repair Hardie plank siding?

Though it is a tough wearing product, the surface of the siding can sometimes be damaged during installation, by unusual wear or by impact. The James Hardie company, makers of HardiePlank, recommends the use of a cement patch product made of an acrylic mortar compound for patching their siding products.

How do you seal Hardie board cracks?

Does cement board siding expand and contract?

Fiber cement boards don't expand and contract much, but leave a little room for expansion at the end joints and then fill the gap with caulk.

Does cement board siding shrink?

YES, all Fiber Cement Siding will shrink.

Should you paint the backside of Hardie board siding?

All sides of the Hardie Board are painted (even the edges) and therefore the entire board is completely sealed. (Although Hardie Board comes from the factory without the back of the board primed, according to James Hardie's support department, they say you can prime and paint the entire board.)