Do you need to put chlorine in above ground pool?

Chlorine is essential for pool water because it kills harmful algae, bacteria and microorganisms. Unfortunately, chlorine breaks down when exposed to the sun and chemicals from sunscreen, sweat and more. A pool should have a chlorine level between two and four parts per million (ppm).
Takedown request   |   View complete answer on familyhandyman.com


How often should I add chlorine to my above ground pool?

Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
Takedown request   |   View complete answer on splashpoolsupply.com


What chemicals do I need for my above ground pool?

What Chemicals Are Needed to Open an Above Ground Pool?
  • Preparation. Before adding any chemicals, it's imporant to do a bit of basic cleaning. ...
  • Chlorine. We all know that chlorine is the most important pool chemical. ...
  • Shocks/Oxidizers. ...
  • Water Balancers. ...
  • Algaecides. ...
  • Cyanuric Acid. ...
  • Conclusion. ...
  • Related Posts:
Takedown request   |   View complete answer on sunvalleypoolservice.com


What kind of chlorine do I need for an above ground pool?

For everyday chlorination of an above-ground pool, liquid chlorine (sodium hypochlorite aka bleach) or dichlor is are good choices. Use unstabilized chlorine if you have an outdoor pool with high stabilizer levels. Use stabilized chlorine if you have low stabilizer levels or an indoor pool.
Takedown request   |   View complete answer on myperfectpool.com.au


Do I need to add chlorine to my Intex pool?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Takedown request   |   View complete answer on blog.intheswim.com


Above Ground Pool Care Basics



Are chlorine tablets enough for pool?

To keep things easy, remember that a single 3-inch tablet can sanitize up to 5,000 gallons of water. Which means four tablets are enough to sanitize a 20,000-gallon pool. To calculate how many chlorine tablets to add to your swimming pool, first round your pool's size (in gallons) to the nearest 5,000th.
Takedown request   |   View complete answer on medallionenergy.com


Do you need to put chlorine in a small pool?

Smaller inflatable pools, like kiddie pools, aren't typically treated with chlorine. These pools are small enough to refill with fresh water fairly easily, so small inflatable pool owners typically don't have to deal with chlorine or pH test kits.
Takedown request   |   View complete answer on backyardsidekick.com


How do you chlorinate a new above ground pool?

Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. It's recommended you add a gallon of liquid chlorine or pound of granular chlorine for every 5,000 gallons of water in the pool. You can also add more chlorine at the end of the opening process.
Takedown request   |   View complete answer on discountpoolsupply.com


What do you put in an above ground pool after you fill it?

Chemicals Needed for Pool Start Ups
  1. Stain & Scale Preventer.
  2. Granular Shock Chlorine.
  3. Chlorine Tablets.
  4. pH Increaser and/or pH Decreaser.
  5. Alkalinity and/or Calcium Increaser.
  6. Cyanuric Acid (Stabilizer)
  7. Algaecide and Clarifiers if needed.
  8. Complete Test Kit or Test Strips.
Takedown request   |   View complete answer on intheswim.com


Do I need to shock my pool when I first fill it?

At first you'll add chlorine in what's called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.
Takedown request   |   View complete answer on aquafreshpools.com


How do I treat my pool for the first time?

At the very least, you should have the following chemicals on hand whenever we're talking about treating pool water:
  1. Shock Chlorine Granules or pure liquid chlorine.
  2. Chlorine tablets or Stabilized chlorine (if not using a salt water chlorinator)
  3. pH Regulators (pH up and pH down)
  4. Cyanuric Acid.
  5. Calcium Up and Down.
Takedown request   |   View complete answer on mrpoolman.com.au


What happens if no chlorine in pool?

Statistically, a pool without chlorine is more likely to make you sick because of the possibility of being exposed to the things not contained or killed by chlorine. Remember, your skin is porous, so microscopic impurities can pass through. A pool sans chlorine is akin to a big puddle of murky water.
Takedown request   |   View complete answer on sandiegopools.com


How do you take care of a small above ground pool?

Here are 10 key tips for above ground pool maintenance.
  1. Install a Sump Pump in Your House.
  2. Test the Chlorine Level.
  3. Do Weekly Shock Treatments.
  4. Test the pH Level.
  5. Run the Pool's Pump at Least Eight Hours a Day.
  6. Regularly Clean and Replace the Filter.
  7. Regularly Clean Out the Pump and Skimmer Baskets.
  8. Vacuum Often.
Takedown request   |   View complete answer on familyhandyman.com


How much chlorine do I add to my pool for the first time?

If you're adding chlorine for the first time, add the amount of product required to achieve a free available chlorine level of 2 to 3 ppm. The instructions will let you know how much to use to raise levels by 1 ppm per 10,000 gallons (38,000 L) of water.
Takedown request   |   View complete answer on wikihow.com


How do you keep a pool clean without chlorine?

3 Ways to Sanitize Your Pool without the Typical Chlorine Risks
  1. Salt sanitizers (“saltwater pool”) In recent years, saltwater sanitizers have become a popular alternative to off-the-shelf chlorine for treating water in swimming pools. ...
  2. Ozone pool purification. ...
  3. Ultraviolet pool sanitizing light.
Takedown request   |   View complete answer on articles.bluehaven.com


Are chlorine tablets necessary?

Most pool owners will need about 1-3 chlorine tablets a week to maintain a chlorine level of 1-3 ppm. If you are looking to raise your chlorine ppm by 1, it is a little trickier than liquid chlorine because of its slow to dissolve nature.
Takedown request   |   View complete answer on myperfectpool.com.au


Is pool shock the same as chlorine?

SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool.
Takedown request   |   View complete answer on hthpools.com


Is it better to use liquid chlorine or tablets?

Chlorine Tablets (Dry Chlorine)

They retain well and maintain a higher level of pool chlorine than liquid chlorine. Tablets also require less effort.
Takedown request   |   View complete answer on blog.poolsurgeon.com


How often should you change the water in an above ground pool?

Generally, pool water needs to be replaced once every five to seven years. This should be done during mild weather so that your pool surface is not at risk from strong sunlight and heat. Your pool maintenance company can recommend when it is time to drain your pool.
Takedown request   |   View complete answer on swimdeepblue.com


Can you put straight bleach in a pool?

Bleach contains about 5% to 6% sodium hypochlorite, which means roughly 95% of your jug of bleach won't do anything useful to clean your pool. Some bleach formulations may include colorings and fragrances, which can negatively affect the quality of your pool water.
Takedown request   |   View complete answer on riverpoolsandspas.com