Do you need to flash to stock before loading a new tune?

Registered. if you are using cobb it's not necessary. your stock tune is stored in the device when you install the tuner and flashing a new tune loads a completely new tune. In other words, flashing with a cobb ap is not influenced by the current tune loaded on the car.

Can you go back to stock after a tune?

Returning the vehicle to stock will 'un-marry' the device and allow it to be used on other vehicles if desired. To use custom tunes on another vehicle with the same device, a new tune file will need to be created and loaded onto the tuner.

What should I do to my car before I tune it?

Make sure your engine oil is full, and bring extra oil with you at the time of the tuning appointment. We have limited oil in stock at the shop. Make sure your coolant level is full in the engine/coolant system. The cooling system MUST be bleed before the tuning appointment.

Can you flash tune a stock car?

Tuning a stock car will not gain you a lot of horsepower. However, you can tune your stock car to make it more aggressive, responsive and remove any limitations from the manufacturer. If you have a modern enough car, you will be surprised at how much your car is limited from its true potential.

How much HP will a tune add?

For a general stock car (i.e. no additional performance parts), a tune will boost your hp by 10 to 15 percent. What's more is that if you've added performance parts to your vehicle such as cold air intake, exhaust, or turbo, the hp boost you gain from tuning may be as high as 50 percent more!

How to get your stock file using hptuners to send it to me

How do you flash back to stock MHD?

You can use the MHD to flash back your stock file and the easiest way is only to let MHD flash back the appropriate stock flash, just connect the MHD flasher and select flash back to stock, it will flash your ECU to stock without the need for your stock file if you want completely stock flash.

Can you daily a tuned car?

However, what if you are tuning a daily driver? Can you have a well-tuned vehicle that looks great and still use it for your daily commute? The short answer is “yes.” However, you will have to go about the process somewhat differently than those who are tuning a car that is not driven every day.

Is a dyno tune worth it?

A dyno tune commonly provides for maximum power, better drivability, good fuel economy and a smoother ride. It increases the horse power of your vehicle and returns the vehicle to stock fuel economy. It also prevents or minimizes backfire. Dyno tuning can also save you from costly repairs in the future.

How much is a dyno tune cost?

Costs to Tune a Car

Taking your car to a dyno tuning garage is the best way to not only improve performance, boost horsepower, and make the engine run more efficiently. However, initial costs can start at $400 to $700.

Will the dealer know if you tune your car?

Well-Known Member

Without going into detail, yes. However, depends on the dealer whether its an 'issue' or not.

Can a dealer tell if a car has been remapped?

Is a Superchips remap detectable by the dealer? In most cases, no. Some manufacturers can tell that something has changed, but not necessarily what. If and when you need to return your vehicle back to the original remap, you will need to do one of the following, depending on your purchase.

Can you Untune a car?

You will need a Cipher cable to remove the tune and then you will need a stock map to reflash the car. The tune (license) then sits in the cable till it is re-installed onto another car.

How much does tuning a car cost?

Getting your car tuned is a great way to improve your car's performance and efficiency! But tuning can be a little pricey. While standard options can cost anywhere from $50-$200, higher-end jobs will cost somewhere between $400 to $700.

How much HP does a Stage 2 335i make?

HPF STAGE 2 | 290kW.

Is MHD a WHP?

MHD offers an excellent selection of OTS flash tunes for BMW N54 engines. Expected horsepower ranges from 310whp, on stage 1 maps with poor fueling, up to 430whp on the stage 2+ E50 map.

How long does it take to flash MHD?

The first install takes only 2.5-12* minutes and any map or option change later just 19s – 1.5 minutes*. *flash times vary depending on car, engine type and adapter used.

How much hp do cold air intakes add?

Cold Air Intakes are said to improve your vehicle's performance by 5-20 horsepower. This number will vary depending on the make and model of your vehicle. While this isn't enough power to put you back in your seat, it will give your car or truck a little pep in its step.

What is a Stage 1 tune?

A stage 1 tune is simply an ECU remap or chip tune. This is the most cost-effective way to modify any vehicle for performance. Turbo-diesel and turbo-petrol vehicles respond extremely well to stage 1 tuning and commonly see a 20 – 40% increase in bhp and torque.

How much hp does 93 octane tune add?

When switching from a 91 octane tune to a 93 octane tune you can expect to see an increase of 5 to 6 more horsepower on top of the gains you are already getting from an 87 octane Bama tune.

Will a tune make my car faster?

The best way to improve the performance of your car and get the most out of your engine is with ECU remapping or chip tuning. ECU remapping rewrites the code within your car's engine so that customize functions and rewrite parameters. Chip tuning your ECU can allow you to modify your engine's fuel economy and torque.