Do you have to shock a pool when you first fill it?

At first you'll add chlorine in what's called “shock” levels – an extra heavy dose to start your pool off. A shock dose coupled with extra circulation will ensure that all the water gets treated properly in the beginning.

What do you put in a pool when you first fill it up?

How much shock do you put in a pool for the first time?

Typically for granular shock, you'll need one pound for every 10,000 to 13,500 gallons of pool water. With over 8 million residential swimming pools across the US ranging from 5 thousand gallons to over 30 thousand gallons, the amount of shock you need to treat a swimming pool isn't a one-size-fits-all answer.

How soon after filling a pool Can you swim?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

What chemicals should I balance first in my pool?

Total Alkalinity (TA) is the first thing you should balance in your pool water. TA refers to the amount of alkaline material in the water. And since alkaline is a pH stabilizer, the number of alkaline substances in water will affect the pH balance. The ideal Total Alkalinity range for pool water is 80 – 120 ppm.

How Often Should You SHOCK Your POOL? | Swim University

What chemicals do I need to start up an above ground pool?

What to do after you fill your pool with water?

Is shock and chlorine the same thing?

Chlorine is a sanitizer, and (unless you use Baquacil products) is necessary for maintaining a clear and healthy pool. Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly.

Should I shock my pool before adding chlorine?

In general, you should shock your pool when: Algae begins to grow in your pool. The free chlorine level of your pool measures zero. The chloramines or combined chlorine level rises above 0.5 parts per million (ppm).

Do I use shock or algaecide first?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

Will Shocking a pool raise the pH?

Pool shock.

Shocking your pool is important, but if you're using cal-hypo (calcium hypochlorite), it can raise your pool's pH levels. Don't stop shocking your pool, but do test all your chemistry levels consistently, especially after shocking.

Can I add alkalinity and shock at the same time?

Never add chemicals at the same time, whether you're balancing the water, shocking the pool, or adding a specialty chemical. For most water balance changes, the pump needs to run on the high setting for at least four hours before you can add another chemical or retest the water.

What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.

What time of day should I shock my pool?

Sun Down – You'll want to shock your pool in the evening when the sun has gone down. This gives your pool plenty of time during the night to free the chlorine and clean the water. In the morning, you should be able to enjoy your pool. If you shock your pool during the day, the sun's UV rays will dissolve the chlorine.

Can I swim 12 hours after shocking pool?

After Shocking Your Pool

It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!

How long should you run filter after shocking pool?

While shocking your pool will help kill any germs any algae, it won't actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

Is liquid shock better than granular?

Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.

Which is better liquid chlorine or shock?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.

How quickly does liquid shock work?

Always run the pump when shocking the pool and allow it to circulate for 24 hours. The water should then be a blue or cloudy blue color. Test the water 24 hours after shocking and start adjusting pH and alkalinity levels.

Can you use bleach instead of chlorine in a pool?

Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.