Do I need a subfloor for vinyl?

Before installing any type of hard flooring, it's vital to have a subfloor that is properly prepared. Luxury vinyl tile is more forgiving than other types of hard flooring when it comes to installation on a subfloor that is less than perfect.

Do you need to put plywood under vinyl flooring?

Vinyl flooring is usually not installed directly over the subfloor in residential applications. In most cases 4-by-8-foot sheets of particle board or plywood must be installed in preparation for the vinyl floor install.

Do you need underlayment for vinyl flooring on subfloor?

Vinyl floors under 4mm should be installed right over the subfloor. If you have any areas on a concrete subfloor with moisture concerns, it is recommended to use a vapor barrier underlayment that will not add any cushion to the planks.

What can I use for subfloor under vinyl?

Plywood underlayment is a thin plywood material that is most commonly used under resilient flooring materials, such as vinyl and linoleum sheets and tiles.

Do you lay anything under vinyl flooring?

Most vinyl floors don't need an underlay. If the surface you're laying on is level and smooth, a well-cushioned vinyl floor should be fine on its own. Our Luxury Vinyl Click flooring is laid using the same as technique as laminate options in that it's loose laid creating a "floating floor".

Vinyl Plank Flooring: Do You Need A Subfloor

Do you need a moisture barrier under vinyl flooring?

A concrete floor may need a moisture barrier before vinyl flooring can be installed. For installation of vinyl flooring you need a smooth, even surface for the underside of the flooring to achieve the best contact for adhesion.

Can I put vinyl flooring over subfloor?

Can I install vinyl flooring over wood, plywood, particleboard or chipboard? You can install vinyl over wood floors if you put a plywood subfloor on top of it. Do not install glue down or peel and stick products over particleboard, chipboard or any form of embossed floor.

How thick should subfloor be for vinyl planks?

When you install your vinyl on a wood subfloor, the top plywood should be a minimum of 1/4″ thick. For most subfloors, you will need to add an extra layer of wood. To do this, measure and cut the plywood to fit your room.

Can I lay vinyl over underlay?

The simple fact is this is not good practice as a vinyl is designed to lay directly to a suitably prepared wood or concrete floor. Laying vinyl onto an underlay, even a very dense product, will cause problems. The primary issue is that it is likely that the product will be prone to being punctured.

How do you prepare a subfloor for vinyl plank flooring?

Can you put vinyl flooring on concrete?

You don't need to be a pro or require expensive tools to install vinyl plank flooring on concrete. Once you prepare the concrete subflooring, just align, click the planks into place, and your vinyl floor will come together in a short time.

How thick should underlayment be for vinyl flooring?

Most vinyl underlayments are 1mm to 1.5mm thick. When dealing with a click lock vinyl of 4mm or thicker, an underlayment has several benefits: It can help smooth over minor subfloor imperfections. It will add extra cushion to the floor, creating a softer feel under foot.

Can you put vinyl flooring on wood?

Many different types of vinyl flooring can easily be installed over hardwood, from floating vinyl planks over hardwood floors and other types of vinyl flooring over hardwood. The key is simply to select a product that doesn't need to be glued, stapled, or nailed to the hardwood subfloor.

Should I seal my subfloor before installing vinyl plank flooring?

Subfloor sealing is not required. It is not even recommended, but if bonding is a concern, dont seal the subfloor. Instead, use some clear-set thin-spread vinyl tile adhesive to aid the tile in bonding to the subfloor.

How flat should a floor be for vinyl plank flooring?

Subfloor must be clean, structurally sound/tight, and visibly dry. Floor must be flat to within a 3/16” in 10' radius tolerance.

Will vinyl stick to plywood?

Actually unsealed wood, plywood and even painted plywood are not good substrates for vinyl. Vinyl is an adhesive backed film that is expected to last for years outdoors in all kinds of weather. To achieve that longevity, the adhesive must have a firm bond with the substrate.

Can you lay vinyl tile on plywood?

When installing vinyl flooring over plywood, peel and stick tiles will bond to bare plywood, but you must ensure the plywood is secure and clean first. With the variety of peel and stick vinyl tiles available, This Old House points out, you can get creative designing floors with different patterns, colors and borders.

Why is my vinyl floor not sticking?

Let the floor dry completely before you start the tile installation. Vinyl tiles stick well with a strong bond. That requires plenty of pressure pushing the tile down onto the floor below. If you install the tiles quickly without pressing them down firmly, they might not bond well.

Can mold grow under vinyl plank flooring?

Although vinyl plank flooring is well-known to be waterproof, it does not mean that liquids can seep through the cracks, grooves, or edges and become trapped under the planks, allowing mold to grow underneath your floors.

What happens if you don't put underlayment under vinyl plank flooring?

Vinyl planks require hard, thin underlay because the product itself is softer. Putting a soft product under vinyl plank will result in an unstable floor that is much more inclined to being damaged and even punctured or torn over time.

How hard is it to lay vinyl flooring?

Of all the do-it-yourself floor coverings, vinyl plank flooring (also known as luxury vinyl) is one of the simplest to install. It is easy to cut, requires no bonding to the subfloor, and snaps together edge-to-edge and end-to-end.

Should I install vinyl flooring myself?

Vinyl plank flooring has all the visual appeal of solid hardwood flooring. Learning how to install vinyl flooring is something you can do yourself. Vinyl flooring costs a fraction of the price of hardwood, making it a great option for beginner home-improvers.

What does loose lay vinyl mean?

Loose lay is a type of luxury vinyl flooring product comprised of not only vinyl, but also phthalate-free plasticizers for added weight and durability. Designed for easy installation, loose lay is generally 5mm in thickness and requires an adhesive only for planks or tiles surrounding the perimeter of the room.