Do I need a sub-base for a concrete slab?

Subbase for Concrete Slab

The subbase placement is optional and it serves as a work platform for construction of the slab and provide more uniform support for the slab. As the thickness of subbase increases, the ultimate load carrying capacity of slab increases.

What kind of base do you use for a concrete slab?

What Material is Used for a Slab Base? The base in concrete construction is usually a form of crushed stone. Most concrete contractors want a mix of coarse and fine aggregate to create a compactable base that is going to be safe for settlement and drainage.

How much base is needed under a concrete slab?

The entire subbase and base system should be at least 4 inches thick—thicker if the engineer feels it is needed for proper support.

Is gravel needed under concrete slab?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

Do you need sand under concrete slab?

Just as every home needs a good foundation, your property's concrete slab needs a good subbase to function properly. Contractors sometimes use sand as a subbase when pouring concrete, but it all depends on the slab's function as well as your region's climate.

Under-Slab Prep | Getting a PERFECTLY FLAT GRAVEL BASE for your CONCRETE SLAB FOUNDATION

Can I pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

What happens if you don't put gravel under concrete?

Because concrete is a very porous material, it will absorb any moisture that it contacts. This can cause pooling. Without crushed stone, pooling water will settle under it and erode your slab. Adding a layer of crushed stone will add proper drainage, as well as create a barrier between your slab and the ground.

Can you pour concrete over rocks?

Big rocks are not a problem as long as there is uniform concrete coverage and adequate rebar for temperature fluctuations. If the big rocks protrude up above grade and if you have a few in a row, it will weaken the slab. We like things uniform, including the grade, thickness of the concrete, etc.

Does concrete need a base?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn't drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

Can you lay concrete over gravel?

Cement mix might work in some cases over an existing gravel driveway. Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.

Do I need sub-base for patio?

Do I really need a Sub-base? The short answer is: if the pavement will be trafficked by vehicles, then yes, but if it will be foot-traffic only, then not necessarily. The type of paving or surfacing that will be used is one of the key factors in determining whether a sub-base will be required.

Can you pour concrete on top of sand?

Pour concrete over a solid, well-drained base

Because concrete slabs “float” on the soil, soft ground or voids underneath may cause unsupported areas to crack under heavy weight like vehicles. Pack about 4 in. of sand or gravel over clay and other poorly draining soils to provide even support.

Can you use broken concrete as sub-base?

It will be fine.

How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Can you pour a concrete slab on soft ground?

Damp ground will not be a problem unless is can not support the weight of the concrete. Cement/concrete does not "dry" , it cures , a chemical reaction. It absorbs water to cure, as noted , some concrete applications are sprayed with water to aid the cure.

Do I need to compact soil before pouring concrete?

The soil you build your concrete pad on needs to be compact and well-drained to ensure the best concrete slab results. Concrete is a porous material so drainage can't be an issue. Otherwise, water under the concrete pad will result in stress cracks in the cement as the ground flexes.

Is 3 inches of concrete enough?

A concrete patio slab should be at least 4 inches thick and have a compressive strength of 3,000 PSI. You're free to make it thicker or stronger, but unless specifically required for your patio build, it's likely overkill to surpass 4 inches in thickness.

Can you pour concrete over grass?

Cheap and versatile and easy to pour, concrete will last you years down the road. You can pour it just about everywhere—including on the grass. Although it takes a little work, pour concrete over grass to create that walkway you always wanted or that mowing preventative you could previously only dream about.

Do you need a rebar for a 4 inch slab?

For 4” concrete slabs used for driveways and patios, #3 rebar is common. Driveways that will support daily traffic by heavy trucks frequently use 1/2″ or #4 steel bar.

How long does it take for 4 inches of concrete to cure?

The general rule of thumb is that concrete takes about 28 days to dry for every inch of slab thickness. Within 24 to 48 hours, the concrete will be ready for foot traffic.

Can I pour concrete over 2 days?

Although concrete will harden soon after pouring, it's still susceptible to damage from weight during the first four weeks. Wait at least 24 hours before allowing foot traffic, including pets, on a newly poured sidewalk or slab, and don't drive a vehicle on a new driveway for at least 10 days.