Do high pressure sodium lights use a lot of electricity?

High pressure sodium fixtures are not as energy efficiency as LEDs. In fact, LED bulbs use between 40-75% less electricity than a HPS fixture.

Are high pressure sodium lights expensive to run?

Low and High Pressure Sodium lights are very cheap to purchase as well as fairly cheap to maintain. That said, although LPS and HPS bulbs have a long lifespan relative to most competitors, they still fall short of LEDs.

How much power do sodium lights use?

High pressure sodium lamps are quite efficient—about 100 lumens per watt when measured for photopic lighting conditions. The higher powered versions of 600 Watt have an efficacy of even 150 lumens per watt.

Is high pressure sodium more efficient than LED?

LED area lights are top of the line bulbs. They are more efficient and have longer lifespans than High-Pressure Sodium lights.

Can I replace my high pressure sodium bulb with LED?

LED corn cob lights are one of the most efficient ways to replace metal halide, mercury vapor, and high-pressure sodium HID bulbs.

The LED's Challenge to High Pressure Sodium

Are HPS lights obsolete?

They efficiently turn electricity into light, and they give off a type/color of light that promotes better flowering. Despite all the newer types of lights, HPS lights are still easily the most common type of grow light used today, and the majority of commercial grow operations use HPS grow lights for good reason.

Do grow lights take a lot of electricity?

The average daily energy consumption of a 600 watt LED grow light = 0.6 kWh x 16 = 9.6 kWh. That gives us a daily cost of 9.6 x 0.1375 = 1.32 dollarsper day living in the US. And for the UK residents, it's 9.6 x 0.28 = 2.688 pounds per day. Typically, a plant needs 14-16 hours of light per day.

How much electricity does a grow tent use?

How Much Power Does a Cannabis Grow Room Consume? According to the Northwest Power and Conservation Council (NPCC), indoor commercial cannabis production (also known as a cannabis grow room) can consume 2,000 to 3,000 kilowatt hours (kWh) of energy per pound of product.

How much electricity does a 1000W HPS use?

Wattage/Current

Wattage will determine how much power grow lights consume — and how much it will cost to operate them. For example, running a 1,000-watt HPS light with about 1,050 watts of actual power draw for 12 hours a day will consume 4,600 kilowatt-hours (kWh) a year.

Are sodium bulbs efficient?

Sodium lights are also highly-efficient; but they're best as floodlights on the exterior of your home or office due to the intense light they produce.

What is better metal halide or high pressure sodium?

Metal halide is much less efficient than high pressure sodium--MH produces much less light per watt; MH produces more glare due to the blue light component and increases adaptation time; MH more effectively shuts off melatonin production which can trigger tumor growth; MH contains more mercury within the bulbs; MH ...

How much does a grow light add to electric bill?

The cost to run the lights per day is $0.2735236 or $8.20 per month. If I have an HID (high intensity discharge) light with a 600 watt bulb in it, using the same method of calculation, it would cost me $30.90 per month.

Do LED grow lights raise electric bill?

Grow light type

I recommend LED grow lights because they are efficient and provide good-quality light without emitting excessive heat. Unless you are buying large LED lights to cover a large number of plants, such as this Spider Farmer grow light, you will barely notice a change in your electricity bill.

Do LED grow lights use less electricity?

One of the main advantages of growing with LED grow lights is their lower power usage. G8LED grow lights are very efficient at growing healthier plants with increased potency while reducing the amount of power consumed, hence saving money.

How much does it cost to run a 1000 watt LED grow light?

A 1000 watt Led grow light, running 18 hours a day over a 30-day period at a cost of 14.21 cents per kWh will set you back $76,24.

How much does it cost to run a 60 watt LED light bulb for 24 hours?

Let's say you have a 60-watt incandescent lightbulb and you are paying 12 cents per kWh of energy. Leaving the bulb on the whole day will therefore cost you: 0.06 (60 watts / 1000) kilowatts x 24 hours x 12 cents = approximately 20 cents in one day.

Which is better HPS or LED?

Essentially, we're talking about different technologies and calling them both “HPS.” LEDs are much the same. Though they're generally more efficient than HPS (with some clocking 2.8 µmol/joule), some LEDs are less efficient than high-quality HPS fixtures, and they give you less light.

How long do high-pressure sodium bulbs last?

You'll get a good 24,000 hours out of an HPS lamp. When they do start to degrade, though, HPS bulbs tend to depreciate in their blue spectrum output first. They typically need to be replaced about every 10 to 14 months.

What lights do professional growers use?

Today, the most widely used lights for professional use are HIDs and fluorescents. Indoor flower and vegetable growers typically use high-pressure sodium (HPS/SON) and metal halide (MH) HID lights, but fluorescents and LEDs are replacing metal halides due to their efficiency and economy.

Do mercury vapor lights use a lot of electricity?

Compared with newer HID lighting, mercury vapor isn't very energy efficient. The “efficacy”—or amount of light produced per unit of electricity consumed—is 20-60 lumens per watt. This is better than incandescent lamps (about 15-20 lumens per watt), but significantly lower than other HID lighting.

How often should I replace HPS bulb?

If you use HPS bulbs, plan to replace them after 10-14 months of use.

Do high pressure sodium lights need ballast?

HPS lamps require ballasts to regulate the arc current flow and deliver the proper voltage to the arc. HPS lamps do not contain starting electrodes. Instead, an electronic starting circuit within the ballast generates a high-voltage pulse to the operating electrodes.

How much do LED grow lights cost to run per month?

To run a PhytoMAX-2 1000 12 hours per day at a utility rate of $0.12/kWh will cost $1.51 per day, or $45.36 per month. Running a PhytoMAX-2 1000 12 hours per day uses 12.60 kWh per day, or 378.00 kWh per month.

How much does a 600w LED grow light cost to run?

670×0.15×12×7×10= 84,420(pence)

So this means that your '600w' light will cost you a total of £84.42 in electricity over a ten week cycle.