Do any pros use graphite shafts?

Graphite iron shafts have been used by PGA TOUR professionals for decades including FedExCup Champion Brandt Snedeker and US Open Champion Bryson DeChambeau. There's also a third option in iron shafts which may eventually fall into the “best of both worlds” category.

How many pros use graphite shafts?

In total 100% of the top 100 PGA Tour pros use graphite shafts in their drivers, fairway woods and hybrid clubs. 14 out of the top 100 use graphite shafts in their utility irons while 21 pros use steel.

What graphite shafts do pros use?

True Temper golf shafts are the most used among the top 100 players on the PGA Tour making up close to 50% of the shafts played with. Mitsubishi shafts are the next most popular in this elite group with 9.9% having those shafts with Fujikura and Nippon Shafts the next most used with an 8.6% share.

Do professionals use steel or graphite shafts?

In almost all cases, your driver and fairway woods will have graphite shafts. The real question comes down to the irons. The status quo has always been that professionals and low-handicap golfers use steel shafts, while amateurs and beginners benefit more from graphite shafts.

Should I be using a graphite shaft?

Historically speaking, steel shafts have been better for more advanced or higher swing speed players. Graphite has been more ideal for people with more moderate swings or players wanting maximum distance.

Steel Shafts Vs Graphite Shafts For Mid Handicap Golfers

Does Tiger Woods use graphite shafts?

Woods' Masters career has also seen players go from drivers in the 260 cubic-centimeter range to 460 ccs, and in Woods' case, the move from steel to graphite shafts in metalwoods.

Do you swing slower with graphite shafts?

Graphite Shafts

These are much more flexible when compared to the steel shafts. This makes them a perfect choice for those who prefer lighter clubs and have slower swing speed.

What shafts does Tiger Woods use?

Tiger has a Mitsubishi Diamana D+ 60 TX shaft fitted to his driver.

Should I use graphite shafts in my irons?

You get the best of both worlds

Wall mentioned, it's absolutely time to get over any stigma around using graphite iron shafts. I'll go as far as saying that more than 50 percent of golfers would find better performance and a more pleasurable experience by switching to graphite.

Are graphite shafts good for high handicappers?

The choice of Steel or Graphite shafts irons will mainly come down to swing speed. Graphite suits slower swings and steel suits faster swings. Besides that Steel provides more stability and with steel shafts, getting lighter, they are becoming a more attractive offers for many high handicappers.

What shaft does Bryson DeChambeau use?

DeChambeau's driver is Cobra's King Speedzone with an L.A. Golf prototype shaft made just for DeChambeau. The loft is 5.5 degrees—similar to what most long-drive competitors use.

Are graphite shafts more forgiving?

The graphite shafts are more forgiving and do not sting when you mishit, and beginner golfers should take advantage of that. Also, the lighter graphite shafts make the irons go farther when hit well, so it is a win-win for golfers in the game improvement section.

Do any pros use regular flex shafts?

None of the top 100 uses regular shafts. When it comes to the flex of shafts the best pros use therefore it is clear that they don't use shafts that the vast majority of us regular amateurs play with and indeed will often vary the flex of their shafts depending on the type of club.

What is better graphite or steel shafts for irons?

Pros of Graphite Shafts

More lightweight than steel, hence increases swing speed and boosts distance (by 5 yards with each golf club). Because of the lighter weight, graphite shafts are easier to swing. Muffled vibrations on off-center shots. Thus, less painful in the hands, arms, and shoulders.

What shafts do pros use on irons?

True Temper's Dynamic Golf steel shaft has been the most popular shaft on the PGA Tour, and according to the True Temper website, 90 percent of golfers in any particular tournament play True Temper shafts.

How far does average golfer hit 7 iron?

The average golfer hits their 7 iron 145 yards, but the average distances will vary between 128 and 160 yards. Golfers in their 20s typically hit the ball the longest, and the distance tends to decrease as the golfer gets older.

Do graphite clubs break easily?

Graphite shafts do not break easier than steel shafts. Graphite shafts are more robust, lighter, stiffer, and easier to hit than steel shafts. Graphite is the synthetic material of choice; a lightweight material with superior performance is needed, such as spacecraft and racecars.

Can you replace steel shafts with graphite?

On golf clubs that are not forged, light work will still be included, but you can replace the steel shafts with graphite. You will have to heat the clubhead and remove it, and you may have to buy a new grip.

What shaft does Rory McIlroy use?

We believe he has it with 8.25 degrees of loft and it is fitted with Fujikura Ventus Black 6 X shaft.

What irons does Rory McIlroy use?

McIlroy currently uses a set of TaylorMade Rors Proto irons. These are basically P730 irons that have been specced and shaped just for him.

What irons does koepka play?

The announcement of Brooks signing with Srixon took place in November 2021 and he put a set of the Srixon ZX7 irons in the bag. At the time Brooks said of the iron; "I put the ZX7 Irons in play in January and it is the best iron I have played on Tour.

Who should use graphite shafts in golf?

Iron Shafts 101: How to choose between steel, composite, and carbon fiber. There used to be a basic rule for iron shafts – if you're a strong, competitive player you choose steel, and if you're older, slower, a woman, or generally not athletic, you choose graphite.

Are graphite shafts better for your joints?

Should you mis-hit a shot and hit the ground, graphite will absorb much of the vibration so your hands and wrists won't hurt as much as they would with steel. Graphite shafts are recommended for golfers with arthritis, golfer's elbow or other conditions that may make the hands or wrists tender.

Will graphite shafts help golfers elbow?

Yes it helps but it's certainly not a cure all, at least in my experiences. My right arm is shot, graphite helps me not swell up post round. But there is still soreness.

Is there a big difference between steel and graphite shafts?

Typically, steel shafts are much heavier, more durable and are generally less expensive than their graphite counterparts. They are more often than not made from stainless steel and they tend to weigh in between around 90g-120g. Torque or lateral twisting found in all graphite shafts is lower in steel irons.