Do anti theft license plate screws work?

Use special screws to prevent plate removal

Prevent license plate theft by using special screws that require a special security wrench to remove. They're inexpensive and take only minutes to install.

How do anti-theft screws work?

Security screws, also known as tamperproof screws, are otherwise standard screws but with a unique head, making it nearly impossible to remove with common tools. That used to mean that any screws that couldn't be removed with a slot-style or Phillips^® head driver could be considered security screws.

What are security screws for license plates?

Tamper Proof License Plate Screw Kits

Tamper Proof Screws, or Security Screws are difficult (if not impossible) to remove without the matching bit and designed to deter vandalism after installation to keep your plates safe!

How do I stop my number plate theft?

One simple way to protect your car number plates against unauthorised removal, is to replace the existing screws holding the plates in position, with one way security screws.

Why do people steal license plates?

So a valid plate means the car won't get a second look from police. "Sometimes they'll steal just the validation tag," Coulombe said. There are also instances, according to Coulombe, where a vehicle is used in the commission of a crime. By swapping out the licence plates criminals could obfuscate the car's identity.

Screws Designed To Prevent License Plate Thefts

How can I secure my car number plate?

The most traditional way to attach a number plate is by screwing it to the frame of the vehicle, or alternatively using nylon nuts and bolts. You can, in theory, do this with any screw but plastic nut and bolt combinations are recommended to avoid cracking.

Is there a tool to remove one-way screws?

Since the left hand side of a one-way screw is curved, they cannot be extracted using a regular screwdriver. One-way screws need to be twisted counter-clockwise using pliers. You can also use a specially-designed removal tool.

Do new number plates come with screws?

Any number plates you buy usually come without any holes. You can make holes in them, in order to attach the number plate with screws. It's also possible to get number plate sticky pads. You can use these to fix number plates in position.

How does a tamper proof screw work?

Clutch head security screws: These work in a similar way to Sentinel screws and can be installed with a standard slotted screwdriver. Again once this screw is fitted it cannot be unscrewed, making it a permanent or 1-way fixing.

What are the best security screws?

If the application for your security screws is to achieve a permanent, non-removable fixing then one-way, clutch head screws, which are installed with a standard flat blade screwdriver, or Sentinel One-way screws which are installed with a standard phillips / cross head screwdriver, would be a good choice.

How do you remove a screw from a number plate?

If the plates are screw on, the removal is pretty self explanatory. Using a screwdriver that fits the head of the screw, unscrew with one hand with the other hand holding the registration plate in place to ensure it does not move or have any chance of damaging the paintwork. Then repeat on the remains screw(s).

What can I use instead of a tiny screwdriver?

The first thing you could try is a kitchen knife. Choose one that has a rounded tip like a butter knife or a small knife that you would use for a cheese board. Take the blade tip and angle the handle down toward the ground to give yourself some leverage. If you don't have a butter knife on hand, try a dime.

How do you remove a stripped screw with duct tape?

Pro-tip: If the screw is just barely stripped, you might be able to use the duct tape trick. Cover the stripped screw head in duct tape and fit your screwdriver into the groove on top of the tape. Apply pressure and turn counterclockwise. The tape should fill in the gaps making it easy to remove the screw.

How common is number plate theft?

On average, there are around 25,000 number-plate thefts a year according to the AA. You may be wondering as to why people target the least expensive part of the car, however obtaining a number plate illegally is a criminal activity which many fall victim to.

Is it best to stick or screw number plates?

Plates are not easily removed when needed to be changed

Probably the easiest way of fixing your number plates to your vehicle is by using our self adhesive pads. However if you are after a little more security against number plate theft, then you should use the self- tapping screws with matching plastic head covers.

Are number plate screws self-tapping?

Number Plate Screw Fixings

Fix your number plates and show plates to your car with our fixings, ABS plastic caps which will not fade due to the UK weather and Stainless steel self-tapping screws that will not rust and cause corrosion to your car or motorbike.

Should I blur my license plate?

It's better to be safe than sorry and it takes barely any time at all to blur a number plate using photo editors online. By pixelating, blurring or covering the number plate of your car before posting a picture online, you're eliminating any sort of chance of a person being able to snoop.

Why do people blur license plates?

Wonder no more. The answer is privacy, as you've learned. And this is why so many people get privacy plates. They don't want people to track their identity and their location and activity by their car.

Why do people cover their license plate in pictures?

Blurring a license plate online is done for two different reasons: either to protect your privacy or to avoid incriminating yourself. It is possible to dig up the owner's info if the number ends up in the wrong hands. It can also be reported to police whether or not you've done something wrong.