Did they make a 440 Hemi?

The rarest is the Hemi-powered Coronet 440 convertible (440 was the trim level not the engine). Only six were built. The cars' value today?

Was the 440 engine a Hemi?

The 440 used a four-barrel carburetor and had a 10-to-1 compression ratio while it contained 350 horsepower and 480 ft lbs of torque at the beginning. It featured a storied 426 Hemi engine.

What did the 440 engine come in?

The 440 appeared in 1966. Chrysler marketed the 440 as the TNT in its Chrysler cars, the Super Commando in Plymouths and the Magnum in Dodge vehicles. The 440 remained virtually unchanged during its production run, except for the 440 Six-Pack, which featured triple two-barrel Holley carburetors.

What year did the 440 Hemi come out?

The 440 first appeared in 1966, and before long it was available in both full-size sedans and coupes as well as the intermediate muscle machines that were entering their glory years.

What Dodge cars had the 440?

You may recall the 440 Six-Pack in the Dodge Challengers and Chargers, Plymouth Road Runners, Dodge Challengers, Challenger 440s and Dodge Challengers on Super Bees.

383-440-HEMI: SCHOOL IS IN SESSION!

Did Dodge make a 440 engine?

The 440 cu in (7.2 L) RB was produced from 1965 until 1978, making it the last version of the Chrysler RB block.

Did the Dodge Dart come with a 440?

Introduced in 1962, the Dodge Dart 440 model was the upmarket trim version of the Dodge Dart. Included was the standard equipment of the Dart and Dart 330, plus backup lights and exterior moldings. The Dart 440 was available as a 4-door sedan, 2-door hardtop, 4-door hardtop, 2-door convertible and 4-door station wagon.

When did Dodge stop using the 440?

As gasoline shortage in the 1970s forced Chrysler to develop more fuel-efficient engines, 440s were abandoned in favor of more fuel-efficient ones.In 1977, an ill-conceived Lean Burn system was introduced to improve the fuel efficiency of the 440. However, it failed.In just one year, 440 production ceased.

Can you put Hemi heads on a 440 block?

Max agreed that the 426 heads will not fit the 440 block without necessary component upgrades, and a company called SVE (Stage V Engineering) makes the kit you will need. But Max emphasized that the layman answer is no, the Hemi heads will not fit a stock 440 block.

How much HP does a 440 big block have?

Although the most powerful factory stock 440 engines produced a rated 390 gross horsepower, the OEM blocks can take power in the 600hp range, and survive practically indefinitely at the 500-550hp level.

What cars had the 440 Six-Pack?

Mid-way through 1969, Chrysler launched a six-barreled salvo on the muscle car world with the A12 option package on the Dodge Super Bee and Plymouth Road Runner.

What is a 440 Magnum engine?

We all know the 440 big-block is the largest displacement V-8 engine built by Chrysler, and when it comes to a combination of torque, power, and drivability, the 440 ranks as one of the best engines ever built.

What was the true horsepower of a 426 Hemi?

Auto Machine reveals the 426 Street Hemi's true power potential. The Land and Sea dyno reveals the Hemi's actual output: 494.4 hp at 5,950 rpm and 498.3 lb-ft at 4,500 rpm. At 5,000 rpm, where Chrysler claimed 425 hp, it makes 459.3 hp.

Is there a 454 Hemi?

454 HEMI Stroker Engine- 6.4L Based by Modern Muscle Performance.

What is the biggest MoPar engine?

V8 Supercharged Hemi 6.4. 2 Liter, 376.3 C.I.D.

How much HP does a 440 Six-Pack have?

The factory rated the 440 Six Pack at 390 horsepower and 490 lb-ft.

What are Hemi K heads?

The K head has a curved area in the casting for the distributor clearance which makes the valve cover gasket surface a difference shape compared to the 1966 and later heads. Here are some pictures of a 1964 A864 426 Hemi "K" cylinder head. Valve sizes are 2.25 for the intakes and 1.94 for the exhaust.

What are Hemi eagle heads?

The Eagle Hemi cylinder head arrived in 2009 with VVT on non-SRT Dodge passenger cars and trucks. As with the early head, the Eagle uses rocker shafts and 1.65:1 ratio rockers, but there are big differences in the size and shape of the intake port and the rest of the valvetrain.

Why did Chrysler stop making the 440?

Registered. Chrysler was strapped for cash and the market for large v8's was disappearing. The large C body cars were discontinued about the same time so Chrysler's only remaining market was for truck use and their market share was not big enough to support the engine line.

What is a Coronet 440?

The Coronet 440 series was a No. 1 seller among the 1969 Dodge lineup with five models that were available. The models included the two-door coupe, two-door hardtop, four-door sedan, and for families, Dodge offered a two or three-seat, nine-passenger wagon models that were available for the consumer market.

How many 69 Dodge Dart GTS were made?

PRODUCTION Dodge manufactured 5,902 examples of the Dart GTS for the 1969 model year, of which 1,272 were two-door hardtops equipped with the 383-cu.in.

What is a Dodge Dart GTS?

The 1968 Dodge Dart GTS is considered a compact muscle car, one that solidified Dodge's performance-oriented image among the young buyers of the '60s. It featured a boxy look by '68, which was carried all the way to the end of the car's lifespan, but what it didn't gain in looks it more than backed up in performance.

How much is a 1969 Dodge Dart worth?

Depending on a lot of things like the engine, trim and the condition of the car, from being able to ride on the road to tip-top pristine condition maintained like it is a close to heart piece of machinery, you can get a 1969 Dodge Dart GT from $29,900 to $59,900 in the North American region from various used car ...

How do I identify a Dodge 440 engine?

440 has the engine I.D. codes stamped on a machined flat surface (about 3/4" x 2") located in front of the intke manifold towards the dirver's side of the car on the block. The 383/400 has this pad located just in front of the driver's side cylinder head where the head bolts to the block. Hope this helps.