Can you wax over a ceramic coating?

The easy answer is yes, you can. You could lay the ceramic-based protectant down first, let it cure and then apply a wax.

Does wax ruin ceramic coating?

Routine cleaning, garage storage, and applying a high-grade SiO2 ceramic booster spray on top of your coating has proven time and time again to be the best form of protection. When you apply a paste or liquid wax on top of a ceramic coating, you're hindering its ability to fully function.

Can you wax or polish a car after ceramic coating?

Because of its restorative properties, applying a polishing compound to your ceramic coating would simply strip away this protective layer, leaving your car with nothing but the exposed clear coat. While this is great for removing old layers of wax, it shortens rather than extends the life of your paint sealant.

Can you polish ceramic coating?

Unfortunately, no. Ceramic coatings are not standard finishes for vehicles, so polishes are not formulated to work with them. If you use polish on top of ceramic coating, you will strip the coating off of your vehicle, leaving it patchy and damaged.

What should you not do after ceramic coating?

Use only recommended mild soaps. Avoid high volume brush style car washes, and high PH detergent style cleaners. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.

Can you put WAX ON A CERAMIC COATING? Ceramic Coating Tips and Tricks

How do you maintain ceramic coating?

We recommend that customers maintain a wash routine that consists of a proper hand wash at least every two weeks. As your coating becomes covered with dirt and contamination, you will notice a decrease in hydrophobic properties (i.e. water beading & sheeting). It is important to remove these surface contaminates often.

Does Claying remove ceramic coating?

Clay Will Break Down the Ceramic Coating

It's this abrasive nature that allows it to remove contaminants like tar and tree sap from the paintwork. But this also means that it abrade the ceramic coating.

Which is better wax or ceramic coating?

Ceramic protectants (coatings) provide a much higher durability than wax. They resist heat, UV rays, environmental contaminants & harsh detergents much better than wax. Wax on the other hand simply sits on top of the paint's surface. It does not create the chemical bond like we find with ceramic coatings.

What happens when ceramic coating wears off?

When a Ceramic Coating fails, just like when wax fails, you're not going to see it peeling. It simply just wears away and you're going to see water beading and the dirt shedding qualities decline over time.

How do you tell if a car has been ceramic coated?

If you want to know if a car has a ceramic coating, take the car for a drive. Spray the car with water; as you increase the speed of the vehicle, water beads will gather into streams that will flow from your vehicle. In the absence of ceramic coating, the drops of water will cling to the car's surface.

How long does a ceramic coating last?

For the most part, ceramic coatings last between two and five years. In some cases, they can last up to a decade, but this is pretty rare. However, there are many factors that affect their lifespan and might force you to replace yours sooner than you'd expect.

How do you remove ceramic coating?

When the ceramic coating gets old or really worn, it gets easier to remove it from the surface using the mixture of clay and iron dust remover. You can also use grinder polisher to buff and wax the surface to completely remove the coating.

Can you put ceramic wax on top of regular wax?

Ceramic coatings should not be applied over or underneath waxes. Applying a ceramic coating over a wax will prevent it bonding to the paint and negatively impact the durability and finish.

Can ceramic wax be applied over carnauba wax?

But after the ceramic coat is applied, many car owners wonder if you can apply wax on ceramic coatings? Well – the answer to that question is a bit sarcastic – so I'll apologize in advanced. Can you apply carnauba wax on your new nano ceramic coating? Yes you CAN.

Can you put ceramic coating on windshield?

To help with this, a ceramic coat can be applied to your car's glass. While most people use a ceramic coating to protect their car's paint, it really can be applied anywhere – including the wheels, vinyl wraps, fiberglass, PPF, and glass.

How long does ceramic car wax last?

Specifically, you get the incredible, lasting protection of ceramics and the eye-popping gloss of a traditional car wax all in one product. You can expect this coating to last up to 12 months– all for less than $20 and an hour or two of work in your driveway.

Can you steam clean ceramic coating?

Steam cleaning them will make them streak-free clean. Apply a ceramic coating for a lasting touch.

Does iron remover hurt ceramic coating?

Ceramic coatings can withstand an iron remover much more – in fact it's often a great way to bring back any lost water beading on a ceramic coated car. The biggest downside to using an iron remover too often is simply the cost.

Can you scratch ceramic coating?

Scratch-Resistant: Ceramic coating is scratch-resistant, but not scratch proof. The higher quality of a ceramic coating you use, the more resistance your car's finish will have to scratches, while small scratches can even be buffed out entirely.

Can you go through a car wash after ceramic coating?

The short answer is YES! You can take a ceramic coated car through a car wash but remember, not all car washes are the same. We recommend you stay away from automatic car washes that still employ abrasive brushes to clean your car.

How often should you wash your car with ceramic coating?

This allows the coating to fully cure on your vehicle's surface. Once the 7 days have passed, we recommend that you clean your car at least twice a month to prevent contaminant build-up.

Does rain affect ceramic coating?

If it's rain water or tap water, the impurities present in both will destabilize the cross link bonds before they can fully form. That can lead to premature coating failure in many instances. That's why washes and driving in the rain are not recommended during the first week after application.