Can you use Thompsons water Seal on concrete driveway?

The Thompson's WaterSeal Clear Waterproofer is a multipurpose product that can be used on wood, brick and concrete.

What is the best sealer for concrete driveway?

Can you water seal concrete?

When applied to fresh concrete, the product shortens the curing time and makes the concrete up to 250 percent stronger. You can also apply Thompson's WaterSeal to hardened concrete to seal out moisture. The application procedure is the same, but hardened concrete may need cleaning first.

Is it a good idea to seal a concrete driveway?

Concrete performs quite adequately if it is never sealed at all, but applying a good quality sealer every few years will extend its life and keep it looking good. This is especially true if you have a stained or etched concrete driveway or patio.

Why you should not seal concrete?

How To Seal Your Driveway Concrete Using Water Repellent - Do It Yourself

What happens if you don't seal your concrete driveway?

Otherwise, anything left on the driveway will be sealed into the concrete and could lead to staining and discolorations. Debris could also lead to small cracks, which can overtime become larger cracks. To clean the driveway, start by sweeping it off with a broom to remove leaves, dirt, and other debris.

What does Thompson water Seal do on concrete?

Provides proven waterproofing protection for all masonry surfaces including pavers, brick, concrete, stone, stucco, clay and quarry tile. Use for concrete waterproofing and as a brick sealer.

How long does it take for Thompson water Seal to dry on concrete?

Surfaces coated with Thompson's water seal should be dry in about 24 hours. That is all the time you need to wait before you can walk on the sealed surface if you followed the application instructions correctly.

How do you get Thompson's Water Seal off concrete?

To use mineral spirits, wipe the spirits over the area with a cloth. Let it sit for a few minutes, then scrub the area with a scrub brush. To use a concentrated degreaser, follow the instructions on the label of your selected product. Some good choices for this are Krud Kutter or Simple Green.

Is Thompson's a good concrete sealer?

The key features of this product is that is prevents water damage, but it is not nearly as effective as other waterproofing sealer options. Other reviews of Thompson's WaterSeal state that the product doesn't last more than a few months, if that.

Can you use Thompson's Water Seal for wood on concrete?

Multi-Surface Waterproofers

Waterproofing products that protect exterior wood, concrete, and brick/masonry surfaces.

Is there a sealer for concrete?

There are two main types of concrete sealers: film-forming sealers and penetrating sealers. Film-forming sealers include acrylics, epoxies, and urethanes that form a coating on the surface of the concrete. Film-forming sealers, especially acrylics, are more susceptible to wear and will need to be reapplied frequently.

How long does Thompson water seal last on concrete?

Water Seal can only be used on bare and uncoated brick, stone or concrete. How long will Water Seal last? If applied correctly, Water Seal will last up to 4 years.

Is water based driveway sealer better than oil based?

Sealcoating your driveway starts with deciding whether to use water or oil-based sealers. Although both types have advantages, water-based sealers' shorter cure time and eco-friendliness make it the better choice in many situations.

How many coats of Thompson Water Seal do I need?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Does Thompson Water Seal peel?

Wear/Tear and Peeling: 8

The Thompson's WaterSeal clear waterproofer penetrates deep into the wood. There was no peeling or wearing.

Is Thompson's Water Seal a penetrating sealer?

Thompson's^® WaterSeal^® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration.

How often should I seal my concrete?

As a general rule of thumb, you should seal your driveway every one to three years. Here's a look at expert recommendations based on pavement type: Concrete. More durable than asphalt varieties, concrete driveways tend to last longer between sealing.

Is Thompson water seal milky white?

Product will appear milky white during application, but will dry clear. If puddling of product occurs, remove within 15 minutes by redistributing to dry areas or wiping off. Tackiness will result if over-applied.

Is Thompsons WaterSeal breathable?

Thompsons Water Seal, provides a clear long lasting waterproof seal, stops moisture, water or damp penetrating your exterior walls. Silicone micro emulsion is breathable and provides excellent protection for brick-work, aged concrete, render, slate, painting, terracotta and wood, exterior use only.

Can you seal old concrete?

A: Yes! Old concrete can be sealed for the first time or resealed if it has been previously sealed with a concrete sealer. Before sealing old concrete you want to make sure you determine if the concrete has been previously sealed.

Is sealing a driveway worth it?

Kindler said sealing helps prolong the life of a driveway and should be a regular part of home maintenance. “If you seal-coat a driveway or a highway, the surface will last longer,” said Kindler, who teaches a pavement class at Ohio State University. “I would recommend doing it about every three years on a driveway.”

When Should I seal my concrete driveway?

A driveway sealer should be applied after the freshly poured concrete has cured. Most contractors find success waiting 7 to 14 days, but the official time for curing is 28 days. If you are having a patio poured at the same time, it should also be sealed.