Can you use Clorox instead of chlorine in a pool?

It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
Takedown request   |   View complete answer on myperfectpool.com.au


What can I use instead of chlorine in my pool?

There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.
Takedown request   |   View complete answer on houselogic.com


Is Clorox bleach the same as pool chlorine?

In truth, bleach contains the same base chemical as pool chlorine. That chemical is, of course, chlorine, and the only major difference between the two products is the concentration strength. Pool chlorine typically contains some form of stabilizer, as well, though this is not a crucial factor.
Takedown request   |   View complete answer on hunker.com


How much Clorox do I add to my pool?

If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
Takedown request   |   View complete answer on h2ouse.org


Can you put bleach in a vinyl pool?

High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
Takedown request   |   View complete answer on looploc.com


Using Clorox Bleach in Your Swimming Pool



How long after putting bleach in pool Can you swim?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.
Takedown request   |   View complete answer on narellanpools.com


Can you use Clorox to shock a pool?

Now you can know the gallons of bleach you would need to shock your pool as follows: use 0.5 gallons of Clorox per 10K gallons of water to increase the level of chlorine by 5 ppm. If you want to raise the level of chlorine by 2.5 ppm, then you would need ¼ gallon of the product per 10K gallons of water.
Takedown request   |   View complete answer on poolpeace.com


Can you chlorinate a pool with bleach?

The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.
Takedown request   |   View complete answer on fix.com


What is stronger bleach or chlorine?

Answer: It is true that pool chlorine is stronger than bleach. For bleach and water to be the same strength as pool chlorine and water, you would have to adjust the ratio, increasing the bleach and reducing the water. But no matter which chlorine you use, make sure to test a small area before doing the job.
Takedown request   |   View complete answer on orlandosentinel.com


Can I use baking soda instead of chlorine in my pool?

A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
Takedown request   |   View complete answer on armandhammer.com


How do you treat pool water naturally?

Here are some proven, and natural, pool chlorine alternatives you can use:
  1. UV Light. Water passes through a tube with a UV light inside. ...
  2. Diatomaceous Earth (DE) ...
  3. PHMB. ...
  4. Plants. ...
  5. Hydrogen Peroxide. ...
  6. Showering Before Swimming. ...
  7. Salt Water.
Takedown request   |   View complete answer on diynatural.com


Can you put too much bleach in a pool?

Risks of Over-Chlorination. While slightly higher-than-normal levels of chlorine in your pool are harmless, exposure to an over-chlorinated pool can have adverse effects on your health and well-being. Excess chlorine can alter the pH level of the water in the pool, making it more acidic.
Takedown request   |   View complete answer on backyardpoolsuperstore.com


How much chlorine is in Clorox?

[1] This product is an 7.4% sodium hypochlorite solution containing approximately 7.03% available chlorine by weight.
Takedown request   |   View complete answer on en.esbe.com


Is pool shock the same as bleach?

Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). Some Clorox products go as high as 8.5%. At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach.
Takedown request   |   View complete answer on eztestpools.com


Does Clorox bleach have chlorine?

Clorox takes the chlorine it bought and bubbles the gas through a solution of water and sodium hydroxide. All the chlorine is converted to sodium hypochlorite. Clorox-brand household bleach is a 6 percent solution of sodium hypochlorite in water plus the other added cleaning agents, stabilizer and dispersant.
Takedown request   |   View complete answer on hunker.com


How much bleach do I use to shock my pool?

Calculate the amount of bleach you need based on the fact that 1 gallon will raise the free chlorine level of 30,000 gallons of water by 2 ppm. If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.
Takedown request   |   View complete answer on hunker.com


How much bleach equals a bag of shock?

One pound of 65% Cal-Hypo is equivalent to 117 fluid ounces (0.91 gallons) of 8.25% bleach. One pound of non-chlorine shock (43% MPS) is "equivalent" to 36 fluid ounces (0.28 gallons) of 8.25% bleach, but non-chlorine shock is not the same as chlorine.
Takedown request   |   View complete answer on troublefreepool.com


What can I use instead of pool shock?

Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
Takedown request   |   View complete answer on budget101.com


Can I use shock instead of chlorine?

SKIMMER NOTES: No. Chlorine and shock are not the same thing.

Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No. Chlorine sanitizers and shock are similar but different in strength.
Takedown request   |   View complete answer on yourdiypoolsupply.com


What happens if you swim in a shocked pool?

What Happens If You Swim In A Shocked Pool? If you do not wait for the chemicals used to shock a pool to totally dissolve then you could be placing yourself in serious danger by swimming in it. At the minimum, you will feel itchy skin and eyes because of the chemicals present in the water.
Takedown request   |   View complete answer on triathlonbudgeting.com


Can you bleach a pool during the day?

Best time is either after sunset, or when you need it. Bleach doesn't lose concentration overnight unless it has something to work on. In fact, a good way to tell if your pool is in good shape is to do an overnight chlorine test. Ideally, the FC at night should be the same as the FC level the next morning.
Takedown request   |   View complete answer on troublefreepool.com


Can I put Clorox in my kiddie pool?

Many of us want to cool off in a backyard pool, but we also want to make sure there are no dangerous bacteria lurking in these pools that do not have any filtration system in place. You can use Clorox® Regular Bleach2 to treat the water in a child's wading pool.
Takedown request   |   View complete answer on clorox.com


Is Clorox harmful to humans?

Clorox bleach can be harmful to humans if ingested or inhaled, or if it stays on the skin for too long. If Clorox makes prolonged contact with the skin, such as when using disinfectant wipes, it can cause skin irritation.
Takedown request   |   View complete answer on hunker.com
Previous question
Do towels absorb water?