Can you tile a shower without grout lines?

Well, the short answer would be a simple no – you should not attempt to install tile without grout.

Are grout lines necessary?

In short, the answer is no. You shouldn't attempt to tile without grout. Grout is necessary to protect your tile and the wall behind your tile. However, if you don't like the appearance of grout lines, there is a way that you can minimize them.

What is the smallest grout line for tile?

Smallest size grout lines should not be less than 1/16″. This is an acceptable space that can be properly grouted. When the space between tiles is so little like 1/32″ which is often referred to as “credit card lines” or “penny lines”, it's not possible to fill that space all the way through the bottom of the tile.

What tile does not require grout?

Daltile developed Campisi with Cliks to provide homeowners the best of form and function. These tiles feature patented tongue-and-groove interlocking joints and built-in grout that simply clicks together so no mortar or grout is needed.

Is Groutless tile a good idea?

Groutless tiles are a great option for other areas of your house since they're so low maintenance! If you fell in love with the look of a feature wall or want to add a dazzling fireplace surround, grout-free (or in this case, minimal grout) tiles are a stunning option that won't add to your household chores!

Can you lay tile without grout lines?

Can I install tile without grout lines?

Well, the short answer would be a simple no – you should not attempt to install tile without grout.

How big should grout lines be in shower?

Grout Joint Width for Corner Tile

Shower tiles should have a 1/8″ joint between their edge and backer boards or adjacent tiles. For example, if tile is being set on the main shower wall, then leave a 1/8″ expansion joint between the tile edge and adjacent backer board.

How do you install porcelain tile without grout lines?

Can I tile without spacers?

Tiling without spacers is not only extremely difficult but also time-consuming. You need to stop constantly and adjust the tiles so that you get an even layout. With a tile spacer, on the other hand, you will spend less time agonizing over the width and accuracy of your lines.

Where do you start when tiling a shower?

Can porcelain tile be used on shower walls?

The truth is that there is no one type of tile that is “shower tile,” and various types of stone, glass, ceramic, and porcelain tile are all used in bathrooms and showers. If you are wondering about using porcelain tile for your shower, the simple answer is: Yes! You can use porcelain tile.

Which direction should 12x24 tile be laid?

Choose the Tile Direction Well

Its direction is similar to a brick wall, where the longer side is across the surface. This creates a more pleasant layout and makes the room look wider. For a much smaller space, such as the bathroom, it's best to lay down the tiles the long way, where the longer side is set vertically.

What is the smallest grout line for shower tile?

For instance, tiles up to 8-by-8 inches square — small-format tile — require grout lines that are 1/32 inch up to 1/8 inch. Regular-format tiles (up to 16-by-16 inches square) call for grout lines 1/8 inch wide for floors. Large-format tiles, 18-by-18 inches wide, require a smaller grout line (1/32 inch).

How much space should be between tile and shower base?

Leaving a 1/16″ gap between the tub and tile will prevent the tile from cracking when the tub expands. Plus, a 1/16″ gap allows the caulk to properly fill the space and waterproof the transition between the tile and tub or shower.

What grout is best for shower walls?

Epoxy grout is a better choice for showers, kitchen, bathrooms, and other damp areas because it is stain resistant and requires no sealing, unlike cement-based grout.

Can you use silicone instead of grout?

Silicone should never be used as grout. Only approved grouts should be used indoors. The grout should be forced in with a float and wiped over with a sponge to ensure a nice professional finish and this will not allow the water in.

Do you grout between tile and wall?

When you install ceramic tile on the floor, you must take care to create an expansion joint between the walls and the tiled floor. The Tile Council of North America recommends at least a quarter-inch gap between the tile floor and the walls. Never fill this gap with grout, because tile grout is not flexible.

Can you fill in grout lines?

Since grout is porous, it crumbles over time with normal wear. Using grout to fill in cracks will restore it beautifully, and you can make spot repairs as needed.

Can I tile over drywall in shower?

The bottom line is that drywall (and this includes moisture resistant drywall) should never be used behind tile in wet areas (showers and tub-shower combinations).