Can you sprinkle cement over gravel?

Cement mix might work in some cases over an existing gravel driveway. Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.

Can you concrete on top of gravel?

Even though you can pour concrete over dirt it's not recommended. You should use any type of gravel and this really comes down to the homeowner and the subgrades. It's recommended to use something compatible and easy to trim, which in turn will keep everything stable and will properly support the slab.

Can you cover gravel with concrete?

Generally, you should not put gravel over concrete, especially in high-traffic areas. Gravel over concrete may look nice, but it is not a lasting and safe solution. Over time, the gravel will shift due to walking or driving over it, leaving bald spots exposed and creating tripping hazards.

What happens if you pour concrete over gravel?

Adding crushed stone under your concrete slab will provide a level surface for your foundation. Simply pouring concrete onto the ground will expose it to elemental erosion that will cause cracking and sinking. Similarly, if there are roots or plants under your slab, they may rot and cause unevenness.

Can you sprinkle cement over pea gravel?

Thankfully, there are a number of options for how to keep pea gravel from washing away. The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you're stabilizing pea gravel with cement, it will hold for a while until it's eventually damaged by traffic and water exposure.

brushing CHEAP concrete onto a gravel driveway (adding strength and resilience)

How do you cover pea gravel for concrete?

Carvestone can be installed over old concrete

It can bind smooth pea gravel into an unbroken surface. It makes an excellent pool deck surface. It creates a very hard surface, three-eights of an inch in thickness, rated strong.

How do you make a gravel solid?

Do you have to put gravel down before pouring concrete?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

How do I keep my gravel from moving?

The most effective, durable, and low-maintenance way to stop gravel from spreading is by using plastic permeable pavers from TRUEGRID. Much like borders, they lock the gravel into place. However, the grid paver cells within each paver retain and keep the gravel from moving at all, even within the borders of the paver.

How do you bind loose gravel?

Quick and easy to install, Pour On gravel binder provides a cost effective way to bind and stabilise loose gravel. The gravel resin is most often used creating attractive and easy to maintain gravel landscaping and pathways. Pour On is the ideal polyurethane gravel binder to achieve a perfect resin stone surface.

Can you put new gravel over old?

So long as you're going to use the same type of gravel it'll look fine - mine did. @sam_mirfin You don't need to put down a new fabric sheet, just lay your slate chippings in a deep enough layer on top of the old gravel - it will be fine like the others say.

How do you resurface a gravel driveway?

What type of gravel goes under concrete?

The base in concrete construction is usually a form of crushed stone. Most concrete contractors want a mix of coarse and fine aggregate to create a compactable base that is going to be safe for settlement and drainage.

Can I pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

How many inches of gravel do you need for a concrete slab?

Excavate the soil to a depth of 8 inches, allowing 4 inches for the gravel base and 4 inches for the concrete slab.

Can you fill gravel potholes with concrete?

Remove large chunks of broken concrete and sweep out the hole with a stiff broom; flush it thoroughly with water from a garden hose. Then remove standing water with a sponge. Mix ready-mix concrete according to the manufacturer's instructions; use sand mix for small holes and gravel mix for large or deep ones.

How do I turn my gravel driveway into asphalt?

An inexpensive method for paving a driveway consists of gravel or crushed rock over a graded, packed dirt bed. If you already have a gravel driveway and want to pave over it, the least expensive option is adding a hot-asphalt seal-coat layer over the surface of the gravel, followed by a layer of crushed rock.

How do you stabilize a steep gravel driveway?

The only option for keeping gravel in place on a slope is to stabilize it with pavers. Pavers are locked into the ground and they trap gravel in place, preventing it from coming loose and spreading, even under heavy vehicle traffic.

Does crushed concrete make a good driveway?

Along with being an impressive and reliable driveway surface, crushed concrete can also be used in landscaping projects, construction, and much more. Use it for your driveway first, and you may get ideas for other ways to use it around your property.

Can you make a patio with gravel?

If you want an attractive backyard sitting area, consider creating a pea gravel patio. A pea gravel patio can provide an appealing space for relaxing and entertaining plus it's a relatively easy and economical do-it-yourself project.