Can you spray Thompson's water seal with a pump sprayer?

Yes, you can apply your Thompson's water seal using a standard pump garden sprayer and achieve the desired results. This sprayer is best to use when applying sealers.

Can you apply sealer with a pump sprayer?

Standard Pump Garden Sprayers

Yes, you can use a standard pump garden sprayer to apply your sealant. Or at least, you can if you're applying a water-based sealer.

What is the best way to apply Thompson's water Seal?

The fastest way to apply is with a pump-up sprayer (using a coarse setting), but you can also apply with a brush or a roller. You should apply liberally. In the case of areas with heavy discoloration or dirt, apply a second coat, brush lightly with a broom and hose off.

How do you thin Thompson's water sealer?

It was 2 parts masonry sealer cut by 1 part mineral spirits (paint thinner). The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson's Water Seal cut with 1 part paint thinner.

Can I apply deck stain with a pump sprayer?

A garden pump sprayer or a deck stain pump sprayer is the perfect tool to use to apply deck stain. You can finish a deck that would take days to stain by hand in a matter of a few hours with a pump sprayer.

applying tompson water seal with a sprayer

Is it better to roll or spray stain on a deck?

Rollers are a great option when you need to apply the stain faster, but they can be difficult to work with in hard-to-reach areas. Using a sprayer is a viable option too, but you need to make sure that the sprayer is set to low pressure and you're spraying close to the wood.

Can you use a pump sprayer to paint?

Things You'll Need

However, the pressure created by the hand pump is not as even or controllable as a compressor-based sprayer's. This makes hand pump sprayers a bit unwieldy if you are a novice painter but with a little practice, you can create a relatively even paint coating.

Can deck sealer be sprayed on?

An outdoor deck is more exposed than indoor wood, which means regular sealing is required to keep it protected. While you can apply the sealer by hand with a paintbrush, a sprayer is the much more efficient solution.

What's better than Thompson's water seal?

Can you apply two coats of Thompson's water seal?

One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.

Can I use a pump sprayer to stain my fence?

While some may think staining a fence can take an entire Saturday, with the right prep and a pump sprayer you can achieve gorgeous results in a very short amount of time.

Can I use paint sprayer for sealer?

Solvent resistant pump-up sprayers are more suitable for solvent base sealers and can equally be used for water base sealers. These sprayers are equipped with Viton seals and gaskets and metal, brass or Teflon tips.

How long does Thompson Water Seal last in can?

PVC primer and Thompson's Water Seal™, sealed tightly, can be kept indefinitely (no minimum temperature), as can concrete bonding additive if stored above freezing.

Do you have to shake Thompson's Water seal?

Give the surface a scrub with a stiff bristle brush. Fill any cracks and do pointing repairs, if needed. APPLICATION Give the tin a good shake. Apply using a brush or roller.

Why is my Thompson Water Seal sticky?

If the weather is too cold, your Thompson water seal layer will just stay there and not dry as it should. Ideally, the sealant will dry best in temperatures above 50°F. If the thermometer units dip below this level during or soon after application, the deck may stay sticky for longer than 24 hours.

How long does it take for Thompson Water Seal to dry?

Drying. Allow at least 48 hours to dry; however drying time will vary depending on the substrate, temperature, and humidity. Allow minimum of 30 days drying time before applying oil based paint over Thompson's® WaterSeal® Waterproofing Wood Sealer – Clear.

How far will a pump sprayer spray?

The range of a pump sprayer depends on the spray pattern. It will spray the farthest when set to a narrow stream. Moist pump sprayers can spray up to 20 feet with some more powerful sprayers capable of reaching 30 feet.

Can you use bleach in a pump sprayer?

While you can use a piston pump backpack sprayer with a bleach solution of up to 20 percent, diaphragm backpack sprayers are designed to handle bleach solutions better than a piston pump sprayer. Solo has several sprayers that are resistant to bleach solutions.