Can you set fence posts with dry concrete?

Fast-setting concrete is ideal for setting posts because there's no mixing—you simply pour the dry concrete from the bag right into the hole, then add water.
Takedown request   |   View complete answer on quikrete.com


Can you use dry cement for fence posts?

While using dry cement, or gravel, to set your fence post can be much less messy; it can also potentially be less durable. Dry cement is best suited for soils that consist of a more clay-like composition. It does not do as well as wet cement in loose soil.
Takedown request   |   View complete answer on novafence.com


Can you put concrete in the ground dry?

As long as you not planning to put anything heavy on it it will be OK. Dry pouring concrete can have dry pockets were water did not get to. Usually using dry pouring to make a drive way for car, garage is sufficient and possibly with some light bearing structures(open steel/wood Structures) .
Takedown request   |   View complete answer on diy.stackexchange.com


Will quikrete set up without water?

No. Unless you live in a swamp, there won't be enough moisture, and even if you do it won't be mixed with the cement properly. The concrete will be dry, crumbly, and have no strength. Just mix it like the directions say.
Takedown request   |   View complete answer on diy.stackexchange.com


Can you use quikrete dry?

Whether you are building a new fence, setting a mailbox or anchoring a basketball goal or play set, QUIKRETE® Fast-Setting Concrete is the ideal product for the job. With Fast-Setting Concrete there is no mixing or tools required – You simply pour the dry mix right from the bag into the hole, then add water.
Takedown request   |   View complete answer on quikrete.com


Does Dry Setting Concrete Work? Fence Guy Answers



Is quikrete good for fence posts?

The best concrete mix for fence posts I've found is Quikrete Fast Setting Concrete Mix in a 50 lb bag. It's 4000 psi, easy to work with, sets up fast, and doesn't need to be mixed. Just pour it in the hole and soak with water.
Takedown request   |   View complete answer on gambrick.com


How strong is dry poured concrete?

After 7 days from pouring the concrete, you can drive on a new driveway. By the time a week has passed the concrete will have reached approximately 90 percent of its final strength, and it's usually safe to drive on it.
Takedown request   |   View complete answer on bobvila.com


Can you pour concrete on dry concrete?

You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.
Takedown request   |   View complete answer on apdecks.com


Is it better to pour concrete wet or dry?

Dry the ground out even more by throwing an inch of sand onto the ground. Not only will this absorb the water, but it will make it an ideal surface to pour concrete on as the sand holds up much better in colder weather.
Takedown request   |   View complete answer on hunker.com


What happens when you don't add enough water to concrete?

If there is too much water, the resulting concrete will be weak and will have poor surface qualities. If there is not enough water, the concrete will be hard to work into place. Concrete that is too dry on the left, and too wet on the right.
Takedown request   |   View complete answer on tonerarch.com


What is dry packing concrete?

According to the Bureau of Reclamation's Guide to Concrete Repair, dry pack mortar contains (by dry volume or weight) one part cement, 2 1/2 parts sand, and enough water to produce a mortar that will just stick together while being molded into a ball with the hands.
Takedown request   |   View complete answer on concreteconstruction.net


Is one bag of concrete enough for fence post?

1 – 4 bags of concrete per fence post are typically what's needed. This depends on the type of soil, fence design, height, post size and bag weight. In general the depth of the post's hole needs to be 1/3 to 1/2 of the above ground height of the post.
Takedown request   |   View complete answer on gambrick.com


How do you use instant post concrete?

Pour Instant Post Set into the hole using a circular motion, stopping about 3-4" below ground level. Tamp mixture to remove air pockets. Pour balance of the required water into hole. Re-tamp mixture, making sure no dry cement remains.
Takedown request   |   View complete answer on mmconcrete.com


How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.
Takedown request   |   View complete answer on homeguides.sfgate.com


Does dry concrete absorb water?

Water is part of every concrete mixture, and even thoroughly dried slabs can absorb and release moisture content with changes in ambient relative humidity (RH). Healthy concrete slabs will still retain water vapor, but unaddressed excess moisture content leads to a host of concrete slab moisture problems.
Takedown request   |   View complete answer on concretemoisture.com


Will fresh concrete stick to old concrete?

Fact: Fresh wet concrete does not normally bond well to existing dry concrete.
...
When patching existing concrete, here's how to achieve a strong and lasting bond between the new and old concrete.
  1. Repair or replace? ...
  2. Prepare the surface. ...
  3. Choose a bonding method. ...
  4. Wet the surface (if necessary)
Takedown request   |   View complete answer on sakrete.com


What is dry cast concrete?

Dry cast concrete has very little water and has zero slump (more like the consistency of wet sand at the beach as opposed to what you'd normally see come out of a cement truck). It contains only enough water to hydrate the cement.
Takedown request   |   View complete answer on blog.alliancegator.com


How long does it take for concrete to fully dry?

However, it is not completely cured until after 28 days, which is when concrete achieves its full, effective strength—so be sure to avoid using heavy equipment and large vehicles on the slab until then. Waiting for concrete to dry can feel like a chore, especially if it looks dry and ready to go.
Takedown request   |   View complete answer on ics50.com


Can I pour concrete over 2 days?

Although concrete will harden soon after pouring, it's still susceptible to damage from weight during the first four weeks. Wait at least 24 hours before allowing foot traffic, including pets, on a newly poured sidewalk or slab, and don't drive a vehicle on a new driveway for at least 10 days.
Takedown request   |   View complete answer on bobvila.com


Will rain hurt freshly poured concrete?

Rain falling on top of freshly laid concrete can damage the surface and compromise a level and floated finish. Even worse, if too much extra water works its way into the concrete mix, this can result in weak concrete overall.
Takedown request   |   View complete answer on mastermixconcrete.co.uk


Is 2 feet deep enough for fence posts?

The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Takedown request   |   View complete answer on kingcats-fence.com


Should I use concrete or cement for fence posts?

Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
Takedown request   |   View complete answer on takeayard.com


Is quikrete as good as concrete?

Summary: Is Quikrete As Good As Concrete? Quikrete premixed concrete is just as good, and strong, as traditional concrete you buy from a plant or concrete you mix on site. Concrete is made from sand, cement and aggregate stone and that's exactly what's in Quikrete premixed concrete.
Takedown request   |   View complete answer on gambrick.com
Previous question
What is Nm in bike?