Can you put white vinegar on concrete?

White vinegar and a little scrubbing with a brush is a very effective, eco-friendly way to remove rust stains from concrete—even those that are decades old. Pour the white vinegar directly onto the stain, allow the liquid to penetrate the area for 20 minutes, and scrub with a stiff-bristled brush.
Takedown request   |   View complete answer on thisoldhouse.com


Can white vinegar damage concrete?

One isn't going to hurt you but eating the bag overtime can impact the eater's weight. Etching – Vinegar's ability to dissolve CaCO3 will dull your marble, travertine, concrete and terrazzo surfaces. It may “clean” the surface but it is also dissolving pits into the finish and effectively dulling it.
Takedown request   |   View complete answer on marblelifeproducts.com


What happens when you put vinegar on concrete?

When it comes to cleaning stone, concrete, and ceramic tile floors, leave the vinegar under the sink. Just like with stone countertops, the acid in vinegar will strip away the protective sealant from stone tiles, making them look dull and leaving the surface vulnerable to etching and pitting.
Takedown request   |   View complete answer on housetipster.com


Can you use vinegar on concrete floors?

Cleaning Concrete Floors with Vinegar

A natural, all-purpose cleaner, white vinegar is one of the best ways to clean concrete, especially if your floor has stubborn stains caused by mildew or grease. Vinegar also works as a phenomenal spot treatment and stain remover.
Takedown request   |   View complete answer on tipsbulletin.com


What is the best cleaner to clean concrete?

The Best Concrete Cleaners of 2022
  1. RMR-86 Instant Stain Remover Spray. ...
  2. Sheiner's All Purpose Floor Cleaner. ...
  3. Zep Concrete Pressure Wash Cleaner Concentrate. ...
  4. Zep Heavy-Duty Powdered Concrete Cleaner. ...
  5. Oil Eater Cleaner Degreaser. ...
  6. Terminator-HSD Concrete Cleaner. ...
  7. ACT Eco Friendly Concrete Cleaner.
Takedown request   |   View complete answer on ohsospotless.com


Vinegar Magic: Removing mold and mildew



Will baking soda clean concrete?

Concrete Degreaser Recipe

Apply baking soda directly to stain on concrete and let it sit for a few minutes. Pour vinegar on the baking soda and the mixture will start to fizzle. Then, apply laundry detergent and scrub with a stiff brush. Rinse the area with a fully powered hose.
Takedown request   |   View complete answer on tipsbulletin.com


How can I make my concrete white again?

Apply vinegar or bleach to the discolored areas. If you use vinegar, do not dilute it. Pour it onto the concrete and scrub it into the surface with a scrub brush. If the discoloration starts to fade, repeat until it disappears completely.
Takedown request   |   View complete answer on hunker.com


How do you clean a very dirty concrete floor?

How to Clean Concrete Floors
  1. Clear debris. Clean and clear the floor of all debris, dirt and dust using a vacuum, soft bristle broom or dry dust mop.
  2. Apply Simple Green Multi-Surface Floor Care. Spray the cleaning solution as a light mist across your floor section by section.
  3. Mop up in sections. ...
  4. Dry.
Takedown request   |   View complete answer on simplegreen.com


What home remedy will clean concrete?

For a gentle cleaning solution, add one half cup of baking soda to 1 gallon of water. Mix equal parts baking soda, water and salt for highly soiled areas. Clean baking soda residue by spritzing it with vinegar. This creates a safe, natural chemical reaction that results in carbon dioxide gas and water.
Takedown request   |   View complete answer on homeguides.sfgate.com


What's best to clean concrete floors?

You'll just use a mop and a bucket of water mixed with a mild cleaner. Don't use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners.
Takedown request   |   View complete answer on hgtv.com


Does vinegar and water clean concrete?

Mix equal parts of water to vinegar if you need to remove light to medium stains. Use full-strength vinegar if you need to remove heavily soiled concrete and let it sit for 30 minutes before rinsing it off with water. You can even mix baking soda with vinegar to remove grease and deep stains.
Takedown request   |   View complete answer on garagetransformed.com


What is the best cleaner for concrete driveways?

What is the best cleaner for a concrete driveway?
  • For oil, grease, grime and dirt use a concrete degreaser (try RMC GhostShield Micro-Degreaser 1100).
  • For efflorescence, salt deposits, lime or rust stains, use a cleaner made with non-corrosive or biodegradable acid (try RadonSeal Efflorescence Cleaner).
Takedown request   |   View complete answer on concretenetwork.com


How do you remove vinegar from concrete?

If you have a white vinegar stain on concrete, use a mild detergent, warm water and a scrubbing sponge to clean the area immediately. It's a good idea to neutralize the acid by dusting the spot with baking soda.
Takedown request   |   View complete answer on hunker.com


Will straight bleach harm concrete?

Bleach is safe to use on concrete. When applied to concrete, bleach does not harm the sturdy material. However, it does remove spots and unwanted matter from the surface, such as mildew and moss. It also disinfects concrete.
Takedown request   |   View complete answer on hunker.com


Does white vinegar damage pavers?

Will Vinegar Damage Pavers? Yes, vinegar is NEVER safe to use on pavers. It can cause a lot of damage, and you may have to replace a lot of the pavers if you try this. I know that vinegar is often used for household cleaning projects, but when it comes to your patio, it's a big no!
Takedown request   |   View complete answer on precisionpavers.com


What does pouring vinegar in your toilet do?

Its acidity can cut through grime, eliminate stains, and stop odor in its tracks, making it a great tool for cleaning your toilet and a great way to avoid common cleaning mistakes.
Takedown request   |   View complete answer on housedigest.com


Can you clean with white vinegar?

White distilled vinegar is the best vinegar for cleaning because it doesn't contain a coloring agent. Therefore, it won't stain surfaces. Staining can happen when cleaning with a darker-colored vinegar.
Takedown request   |   View complete answer on healthline.com


How do I clean my patio with white vinegar?

How to clean your patio with vinegar
  1. In a bucket, mix your white vinegar and water in a 1:1 ratio. ...
  2. Pour your vinegar and water solution over your patio (you may need several buckets) and leave the vinegar to work its way into the paving slabs for 30 minutes to an hour.
Takedown request   |   View complete answer on simplypaving.com


How do you get black off concrete?

Liquid Laundry Detergent and Household Bleach. One of the most common and effective means of removing black or green mold from concrete is bleach. Bleach will kill mold down to the root, cleaning it off concrete while also preventing it from returning.
Takedown request   |   View complete answer on plasticinehouse.com


Can you clean concrete with bleach?

Concrete driveways are prone to dirt, residue, mold or mildew. Yes, you can clean them with bleach. In fact, bleach not only removes many stains, but it also deodorizes and kills mold and mildew when used properly.
Takedown request   |   View complete answer on powerwashingprosnj.com


What does baking soda do to wet concrete?

Baking Soda: Creates voids and pinholes in the surface. It acts as an accelerator. Veining Compound: Absorbs water from the mix and creates a colored line in the concrete. Spritzing with water activates cement and makes the vein more solid.
Takedown request   |   View complete answer on concreteexchange.com


How do you clean an unsealed concrete patio?

How to Clean Unsealed Concrete Patios
  1. Clear the Patio. Remove all furniture, grills, plants, and toys from the patio. ...
  2. Mix the Cleaners. Pour one cup baking soda into a plastic bucket or bowl. ...
  3. Scrub, Scrub, Scrub. Allow the mixture to sit on the concrete surface for around 30 minutes. ...
  4. Rinse and Dry.
Takedown request   |   View complete answer on thespruce.com


Will bleach turn concrete white?

Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
Takedown request   |   View complete answer on ehow.com


How do I keep my concrete driveway white?

Mix one part lime with two parts of turpentine to form a paste and spread it on the stained parts of your concrete. Cover your mixture with a plastic bag and allow it to sit for a full day. Use rocks to hold down the bag to prevent it from flying away.
Takedown request   |   View complete answer on hardrockconcretecoatings.com