Can you put Thompsons Water Seal over a stained deck?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Can you put sealer over deck stain?

Applying a clear sealer over a deck stain is never a good idea. It really won't help the deck stain or give any added protection more than the deck stain already is. Clear sealers have no pigment and therefore provide zero UV protection. The same goes for polyurethane.

Can you Waterproof already stained wood?

There are three surefire ways to waterproof your wood for years to come. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish. Seal the wood with coating of polyurethane, varnish, or lacquer. Finish and waterproof wood simultaneously with a stain-sealant combo.

Do you stain before water seal?

The order which you apply stains and sealants varies on what you're currently working with. For the best performance, we recommend stain first, seal second, and apply Advance Topcoat third. This will provide the best protection of your home.

Can you put waterproofing over stain?

Yes, you can put Thompson water sealer over stained wood whether the stain is water or oil-based. But surface preparation is key. If the stain has completely dried and cured it's fine to apply sealer, but if there is still some moisture, applying the water seal over the stain might cause problems.

Stain Your Deck in Two Simple Steps: Thompson’s WaterSeal Signature Series Stain

Should I seal a deck after staining?

Most of the time, stains also contain a protective sealant. It's a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface. Water-based stains can be cleaned up with water.

How do you apply sealer to stained wood?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. If using a spray can, hold 8 to 12 inches from the surface and apply two or three light coats.

How long after staining can you seal?

In general, you need to wait between 24 and 48 hours for the stained wood to dry before sealing it with polyurethane.

Can you use water-based sealer over oil stain?

Yes, you can apply water-based polyurethane over oil-based stain. You may be thinking, “But oil and water don't mix,” and you'll be right. You won't be mixing them; you'd just be applying the polyurethane over the stain.

Can Thompson's water seal be used on wood?

Can Water Seal be used on wood? Applying Water Seal will not damage wood, but the level of waterproofing protection will vary depending on the type of wood being treated. For best results, we would recommend a dedicated preserver to protect exterior timber from rot.

Should I stain my deck before sealing?

A: It's really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

Can you clear coat over stain?

Clear finish can be applied over stain or directly to raw wood. It's an extra step, but it's always worth the time. A clear finish provides a protective coat for your wood that guards it against stains, water damage, and natural wear and tear.

Which is better stain or sealer for decks?

Unlike stains, sealants lack pigmentation and generally provide less UV protection than stains. Stains always include pigmentation, which adds color to the deck and helps protect against UV damage. Even the best deck stains generally offer only moderate moisture protection.

Do you wipe stain off a deck?

Apply a small amount of deck stripper to an area on the deck. Let it sit for about 15 minutes, then wipe it off with a rag. If the stain comes off, the stain is water-based. Follow the directions on the deck stripper to remove this stain from the deck.

Will stain rub off if not sealed?

Once dry, the stain won't rub off on the bedding. However, a sealer of some sort (polyurethane, shellac, etc.) will make the surface much easier to clean, resist staining, & wear better, etc.

How do I protect my deck after staining?

The only way to protect your deck successfully over time is to apply a deck preservative. There are sealers, stains and paints on the market especially designed for deck use. Aesthetically, they look very different, but they protect wood and composite decks from moisture damage, fungus growth and ultraviolet light.

What's better than Thompson's water seal?

Does Thompson Water Seal peel?

Thompson's WaterSeal has clearly not been a consumer favorite with deck stains or sealers. Mainly as it does not offer any UV protection and it grays in a few months. The Transparent and Semi-Transparent versions are prone to premature peeling and wearing after about 1 year.

Can you add stain to Thompsons water seal?

Just keep adding more stain as you need it and moving down the deck. One coat is enough, but if more color is desired, a second coat can be applied within two hours before the first coat has dried. With Thompson's^® WaterSeal^® Waterproofing Stains, you can clean your tools with soap and water.