Can you put anchors in concrete?

Concrete screws provide a quick, easy and incredibly strong way to fasten to concrete. And best of all, there's no hammering required or anchor or shield to install. All you do is drill a hole and drive in the screw. That's it.

What anchors can I use in concrete?

These types of concrete anchors would be the Tapcon®, flat or round head sleeve anchors, or any female type anchors where a specific bolt head can be chosen to be inserted into the anchor. These female type anchors would include the: drop-in anchor, machine screw anchor, double expansion & single expansion anchors.

Do you need special anchors for concrete?

Concrete screws are a quick and convenient way to fasten to concrete. The best thing about these screws is that you can screw directly into concrete without any need for hammering or an anchor or shield to install. All you have to do is drill a hole and drive in the screw.

Can you use anchor bolts in concrete?

You can buy wedge anchors online or at a hardware store. Other anchors can work with concrete and brick but wedge anchors are a good all-around anchor that you can use on light or heavy materials. Purchase anchors that penetrate into the concrete at least one inch (2.54 cm).

How do you anchor screws in concrete?

Drill a pilot hole at the proper location with a hammer drill and masonry bit to the depth your screw will penetrate. Tap the plastic anchor into the hole. It should fit snugly but drive in easily with a hammer. If the hole gets a bit large, use a bigger screw to push the plastic against the walls of the hole.

How to Install Masonry

Can I use plastic anchors in concrete?

Wall anchors can be used in drywall, concrete, brick, metal or wood, and installation takes just a few steps. Plastic wall anchors are useful for hanging lightweight pictures and small decorative objects. Keep the weight of the object under 30 lbs. or the anchor may pull out of the wall.

Are Tapcon screws better than anchors?

Tapcon and wedge anchors are pre-installed mechanical anchors that attach structural objects to concrete structures. However, the wedge anchor suits heavier-duty applications, vs the Tapcon anchor that typically serve lighter deployments. Another difference between them is in their fastening method.

What is the strongest anchor for concrete?

Wedge anchors are typically the strongest anchors, but not every application requires a heavy-duty anchor. Some will do just fine with a plastic wall anchor or a nail-in version.

Can I use hollow wall anchors in concrete?

Fastening to Cinder Block

It is important to know that the popular wedge anchor should be used in solid concrete applications, such as fastening to a concrete wall. Wedge anchors should never be used in a block wall or any hollow base material.

How do you hang something heavy on a concrete wall?

Shelving brackets and hooks that are constructed of strong steel mean little if the anchor which fastens them to the concrete wall is too weak to bear the weight. Installing strike anchors that expand inside the concrete is one of the best ways to secure heavy things on concrete walls.

How much weight can a concrete anchor hold?

Anchor Types Overview

Masonry and concrete anchor types are considered light-duty, medium-duty or heavy-duty, based on how much weight they can support. Light-duty anchors are good for wall hangings that weigh up to 50 pounds. Medium-duty anchors are good for wall hangings that weigh up to 200 pounds.

How deep do anchor bolts need to be in concrete?

Steps to Installing Concrete Fasteners

The hole should be drilled 1/4" to 1/2" deeper into the base material than the anchor will penetrate. This allows for any material to fall when the anchor is inserted into the hole. After the hole is drilled, it must be cleaned of all debris, material or dust.

What type of anchor is a Tapcon?

The standard blue Climaseal® Tapcon® screw are a light duty masonry anchor primarily used in dry indoor applications for attaching items to concrete, brick or block. They can be used in applications ranging from attaching 2x4 lumber to concrete, a light fixture to brick, or furring strips to a block wall.

Can you use a regular drill to drill into concrete?

It is possible to drill into concrete with an ordinary rotary drill. Rotary drills take longer to drill into concrete than hammer drills and more physical effort is required. Excessive heat build-up can break the drill bit. One way to speed up the process and avoid breaking the drill bit is to keep the bit cool.

Are concrete screws any good?

Using concrete screws is fast and easy—you just drill a hole and screw them in the same as a wood screw. They work great for light- to medium-duty tasks like fastening shelving brackets, plumbing straps, electrical boxes and furring strips. Concrete screws don't work well on old, crumbling concrete.

How do you attach concrete without drilling?

A common way to secure wooden items to concrete without drill is by using epoxy glue systems. This glue is specifically manufactured for these problems. Before opting for this method, you need to thoroughly clean off and dry the wood for them to bond correctly.

What is a masonry anchor?

Masonry anchors are anchors used to fasten or attach an item to the masonry. Masonry anchors refer to anchors that are used in all types of masonry including concrete, brick and block or CMU. There are three basic types of masonry anchors: Expansion anchors such as the wedge anchor or sleeve anchor.