Can you put a hot tub on a wood deck?

Yes, it absolutely can! As long as your deck is built to code and made to handle the amount of weight the hot tub, there is no issue. It's always best to consult a professional before installing a hot tub on any decking.

Is my deck strong enough for hot tub?

A deck designed to hold at least 100 pounds per square foot will support nearly any type of hot tub. However, many decks are designed for only 50 pounds of weight per square foot – this will not support some hot tubs and you'll have to modify the supports beneath your deck.

Will a hot tub ruin a deck?

Having a hot tub is one of the great treats in life, but the unfortunate truth is that splashing and treading of wet feet can lead to a very wet deck. This water, along with the chemicals in it, isn't good for a wood deck, and can cause your decking boards to deteriorate much more quickly than they otherwise would.

What kind of deck can support a hot tub?

A solid, flat surface is required for a hot tub. A concrete slab is effective at supporting a hot tub. This must be installed along with the concrete deck footings of your deck. For most, a slab four inches thick should suffice, unless one decides to get a very large hot tub then something thicker should be poured.

What is the best base to put a hot tub on?

A concrete surface is an excellent base for your hot tub as this material is extremely sturdy and long-lasting. If you have an existing patio made of concrete bricks, make sure it's in good condition and is level (not angled for drainage). A customized poured concrete pad is an even better choice.

Can a Hot Tub Go on a Wooden Deck?

Does a hot tub have to sit on concrete?

A hot tub does not have to sit on concrete and can be placed on any stable, level surface that will not become unstable due to moisture or weight. Those surfaces include wooden decks, paver stones, gravel beds, or spa pads.

What to put under hot tub on decking?

If you're having a base installed especially for your Hot Tub we would recommend a patio, decking area or poured concrete base. Whatever you choose make sure whoever installs it for you ensures the base is level and large enough for your Hot Tub and steps.

Can I put a small hot tub on my deck?

Yes, you can put a hot tub on a deck. Decks built ground level up to 2 feet off the ground can support up to 100 lbs per square foot; sufficient for most hot tubs. But decks 2 feet or higher will need added support. The added support posts should be no more than 30″ apart & ideally placed in poured concrete.

Where should a hot tub be placed on a deck?

Many builders recommend installing the hot tub so that its edge is 17-24 inches above the decking. Guests can sit on the rim and swing around into the water more easily. For spas located on top of a deck, stairs are in order.

Can I put a lazy spa on decking?

Can my deck hold a hot tub? If you're thinking of putting up an inflatable hot tub on your decking, have no fear! Wooden decking shouldn't have any issues holding a tub full of water and people, as long as it's close to the ground.

Can you put a hot tub on a second floor deck?

A hot tub is an ideal way to upgrade your deck. If you put a spa on a second-floor deck, be sure to have the structure inspected by a licensed contractor.

How do I know how much weight my deck can hold?

If your deck is built to code, then it is designed to hold a minimum of 50 pounds per square foot, of which ⅘ of that total is the “live” load. Therefore, a deck of 120 square feet multiplied by 50 shows that your deck can hold 6000 pounds, including the structure.

Can my deck support a spa?

As a general rule of thumb, if you have a deck that's raised only a couple feet or less, it can support about 100 pounds per square foot. So, if the spa is less than 100 pounds per square foot you likely have nothing to worry about.

What can I put my hot tub on?

For outside installation, it's recommended you place the spa on a level, 4-inch thick concrete slab. Other options include gravel, railroad ties, stepping or paving stones, and bricks. However, given the spa's size, weight, and need for a level foundation, a strong, solid base is much preferred.

How heavy is a full hot tub?

In general, a small two- or three-person hot tub generally weighs around 500 pounds empty and 3,000 pounds when filled with water. A six-person model typically weighs approximately 1,000 pounds empty or 6,000 pounds full.

How close can you put a hot tub to your house?

The steam that comes from the water may seep into windows and water splashed from the tub may cause a slippery walkway. A few feet away from your home and a few feet away from your walkway is typically the ideal combination.

Can you put a hot tub on pavers?

Sitting a Hot Tub on Pavers

If using pavers, select ones that are smooth and can be interlocked at a level height to create a solid, flat layer on top of a concrete base. If you do not want to install a concrete slab underneath the pavers, sand or gravel will be needed to properly support the weight of the hot tub.

Can my floor support a hot tub?

If you consider that spa measures approximately 60 square feet, then the floor must be able to support at least 100 pounds per square foot. Floors in most homes can handle 125 to 300 pounds psf.

Does a hot tub have to be perfectly level?

A hot tub has to be perfectly level. It can be on almost any flat, level, surface. It should not be placed on grass or the earth. Always ensure the surface you are placing the hot tub on can hold the weight of a hot tub filled with water and people.

How much does it cost to pour a concrete slab for a hot tub?

Hot Tub Concrete Pad Cost

A concrete slab costs $5 to $10 per square foot or between $500 and $2,500 for a hot tub. Other options for a hot tub foundation pad are an existing patio, gravel base, pavers, reinforced deck, or plastic spa pad.

What are the electrical requirements for a hot tub?

What are the Electrical Requirements for hot tub installation? Hot tubs either require 110V or 220V of electricity. If you choose a 110V model— often referred to as “plug-and-play”—then you may be able to simply plug the spa into an electrical outlet in the backyard.

How much space do you need around a hot tub?

Space. There must be enough room not just for movement or getting in and out of your tub, but also for maintenance. You'll need to choose a location that allows for easy access to the inner workings of the hot tub. We recommend leaving at least 30 inches around all sides and back panels of the hot tub.

What foundation do you need for a spa?

A cement slab is a common base for spa baths and is perfect for both inside and outside hot tubs. The cement should be poured by someone with experience in spa slabs. This ensures it has been levelled and the surface underneath is sufficient for weight distribution.