Can you pour concrete on top of rocks?

Big rocks are not a problem as long as there is uniform concrete coverage and adequate rebar for temperature fluctuations. If the big rocks protrude up above grade and if you have a few in a row, it will weaken the slab. We like things uniform, including the grade, thickness of the concrete, etc.

Can you lay concrete over rock?

Because concrete is a very porous material, it will absorb any moisture that it contacts. This can cause pooling. Without crushed stone, pooling water will settle under it and erode your slab. Adding a layer of crushed stone will add proper drainage, as well as create a barrier between your slab and the ground.

Is it OK to pour concrete over gravel?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting. Gravel is especially important in clay soil because it doesn't drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains.

What kind of rocks go under concrete slab?

What Material is Used for a Slab Base? The base in concrete construction is usually a form of crushed stone. Most concrete contractors want a mix of coarse and fine aggregate to create a compactable base that is going to be safe for settlement and drainage.

Is gravel needed under concrete?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

brushing CHEAP concrete onto a gravel driveway (adding strength and resilience)

Can I pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

Do you need sand under concrete?

Just as every home needs a good foundation, your property's concrete slab needs a good subbase to function properly. Contractors sometimes use sand as a subbase when pouring concrete, but it all depends on the slab's function as well as your region's climate.

What is the best sub base for concrete?

The best sub-base for a concrete slab is gravel. The soil has to be prepped first before the gravel can be laid down; pouring concrete directly onto rock is not considered a best practice. You can use different kinds of gravel for the subbase as long as it is clean and uniform in shape and size.

Can you build on solid rock?

It's one thing to build a smaller lighthouse on solid rock, but it's quite another to build a typical residential home on top of solid bedrock. You may be thinking of buying land to build your dream home. If so, be sure to review the soil map to check the depth of the soil on the lot you want.

How many inches of gravel do you need for concrete?

Excavate the slab area to a depth of about 7 inches, allowing 3 inches for a gravel base and 4 inches for concrete.

Can you pour concrete over aggregate?

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Can you concrete over pea gravel?

Carvestone can be installed over old concrete

It can bind smooth pea gravel into an unbroken surface.

How thick should a concrete base be?

In general, 6 inch (150mm) slab thickness is considered for residential and commercial buildings with reinforcement details as per design.

How do you harden loose gravel?

How do I make my gravel driveway solid?

We recommend using #4 crushed limestone for the base layer. This stone must be compacted and pressed into the soil to create a solid foundation. We recommend using a bulldozer or heavy truck to accomplish this.

Do I need to compact soil before pouring concrete?

The soil you build your concrete pad on needs to be compact and well-drained to ensure the best concrete slab results. Concrete is a porous material so drainage can't be an issue. Otherwise, water under the concrete pad will result in stress cracks in the cement as the ground flexes.

How long does dirt have to settle before pouring concrete?

An hour at most would be sufficient to let dirt and dust settle before you start pouring. If you have used a combination of water and rollers (or stompers) to compress the dirt, it is usually a good idea to wait for at least 4-6 hours.

Do you need a rebar for a 4 inch slab?

For 4” concrete slabs used for driveways and patios, #3 rebar is common. Driveways that will support daily traffic by heavy trucks frequently use 1/2″ or #4 steel bar.