Can you pass on a solid yellow line in Ontario?

Yellow lines separate traffic travelling in opposite directions. White lines separate traffic travelling in the same direction. A solid line at the left of your lane means it is unsafe to pass.

Can you pass on single yellow line Ontario?

You can pass on both a single or a double yellow line in Ontario. The Ontario Traffic Manual sets the guidelines for when a single or double yellow line are to be used. Basically a double yellow is used when it is likely to be unsafe to pass, such as going around a blind curve.

Can you pass on a solid yellow line in Canada?

"A single solid yellow line marking the centre of a highway permits passing in either direction when traffic, sight distance, and other conditions are ideal," says Nova Scotia's Driver's Handbook.

Can I overtake on a solid yellow line?

You may pass on a two-way road if the yellow centerline is broken. When a solid and a broken yellow line are together, you must not pass if you are driving next to the solid line. Two solid yellow lines mean no passing. Never drive to the left of these lines.

Are you allowed to pass on a double yellow in Ontario?

With the lone exception of Ontario (according to the Globe & Mail's article referenced below), it is illegal in every Canadian province to cross the double yellow line in order to pass on the highway. The double yellow line exists to show that passing in unsafe.

15 - Traffic Lane Markings

Can you pass on a single solid?

Single Solid Line

Means that passing is allowed in both directions - with extreme caution. This may be because of a narrower roadway, frequent rises and dips in elevation, or even frequent turns and curves with limited visibility.

What does yellow line indicate?

Yellow lines separate the opposite flow of traffic. A yellow solid line means pass with extra caution. This is probably the most misunderstood driving rule. Only a solid yellow line accompanied by another parallel yellow centre line, broken or solid designates a no-passing situation.

Can I overtake on solid white line?

4) Solid white center line

As this is a solid line, you are discouraged from overtaking over it unless the way is absolutely clear.

What does yellow line on road meaning?

Single solid yellow line

The yellow line indicates that passing or overtaking a vehicle is allowed, but crossing the yellow line is not allowed. This is why, a single yellow line is also drawn on the side of the lanes, indicating the end of the road.

When the road is marked with a solid yellow line?

Solid yellow lines mark the center of a road used for two-way traffic. Broken yellow lines indicate that you may pass if the broken line is next to your driving lane. Two solid yellow lines indicate no passing.

Under what circumstances may you cross a solid single line?

Here again, the Highway Safety Code invokes motorists' good judgment: Article 344 states that a driver may cross a solid single or double line when overtaking a cyclist, provided it can be done safely.

Can you cross a double yellow line?

Yellow lines on the road: What does double solid yellow line mean? If you're traveling on a road with double solid yellow center lines, it means that you are not allowed to overtake or pass a car at any time. This particular road marking is common on roads with blind curves where you can't see oncoming traffic.

What line means you Cannot pass?

When a solid and a broken yellow line are together, you must not pass if you are driving next to the solid line. Two solid yellow lines mean "no passing." Never drive to the left of these lines.

Is it illegal to pass on the right in Ontario?

You may pass on the right on multi-lane or one-way roads and when overtaking a streetcar or a left-turning vehicle. Passing on the right can be more dangerous than passing on the left.

What does a single solid white line mean?

A solid white line means do not change lanes. A solid white line at the side of the roadway means drivers are not permitted to cross that line to go around someone turning left from the highway or roadway.

What is the difference between a solid line and a dashed line on the road?

Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes.

When the road is marked with a solid yellow line and a broken yellow line with the broken line next to your lane you may pass?

Only at an intersection. Explanation When there is a solid yellow line and a broken yellow line in the center of the road and the broken line is next to your lane, you may cross the lines to pass if there is no oncoming traffic.

What lines can you not overtake on?

Double white lines where both are solid

These are used to prohibit drivers from travelling in an area of the road used by the opposing flow of traffic, generally where overtaking visibility is restricted. You must not overtake if it means crossing or straddling these double solid lines.

What does solid white line at side of road mean?

A thick solid white line at the side of the road is used to indicate its edge. A centre line is a broken into mid-sized pieces and marks the middle of the road. When you see this type of line it indicates that there is a hazard ahead.

Can you overtake on hatched white lines?

Hatched markings:

If the marking is bordered by a solid white line then you are not permitted to enter it unless it is an emergency. If, however, it is bordered by a broken white line then you can enter it to overtake if you have to, but it is generally understood that you shouldn't use it.

What does a solid yellow light mean?

A STEADY YELLOW LIGHT tells you a steady red light will soon appear. If you are driving toward an intersection and a yellow light appears, slow down and prepare to stop. If you are within the intersection or cannot stop safely before entering the intersection, continue through carefully.

What is the meaning of double solid yellow line?

If you see a double solid yellow line, it means you're in a no-passing zone. Which means it is strictly prohibited to overtake or counter-flow, as doing so is highly likely to result in an accident. You will commonly see this marking on bridges and on blind curves.

What is the difference between single and double yellow lines?

The difference between single and double yellow lines in their basic form are that double yellow lines indicate no waiting at any time (other than a very few exceptions) and single yellow lines indicate a part time waiting restriction in force.

Can you cross solid white line Ontario?

White lines separate traffic travelling in the same direction. A solid line at the left of your lane means it is unsafe to pass.