Can you do a stucco inspection in the rain?

Yes, moisture testing can be done right after a recent rainfall. We're probe testing the interior wall sheathing, which should always be dry.

Can you install stucco in the rain?

Can Stucco Be Applied When It Is Raining? It is possible to apply stucco when it is raining out if you take certain extra measures. You will have to cover the walls you are working on, cover your mixing station and have an accelerator in the stucco material to get good results.

What is a high moisture reading in stucco?

8-15% – considered common and “normal” in an exterior wall. 16-19% – elevated levels, should be corrected before damage occurs. 20-24% – indicates excessive moisture and the possibility of damages (if not now, certainly over time) 25%+ – often indicates underlying damages, rot, and decay.

What is an acceptable level of moisture in stucco?

Plaster: Moisture readings must be taken to assure that no more than 12% moisture content is in the plaster prior to the application of any coating. Stucco: An acceptable moisture content for stucco is 12% or less.

What happens when water gets behind stucco?

Water damage for stucco siding is highly problematic, and, if left untreated, holds potential for mold. Water damage can also result in cracks around windows and doors. Crumbling stucco and soft spots or indentations can be indications of very serious water damage.

Standard Stucco Inspection Procedure

Can hairline cracks in stucco cause leaks?

#5 Depth of crack

Note that in a Traditional hard coat stucco, most hairline cracks only penetrate the finish coat, and not through the scratch coat or brown coat, thus they do not usually leak.

When should I worry about cracks in stucco?

Larger cracks, we're talking 1/16 of an inch, are cause for concern. If you can slide your credit card into the crack in your stucco, it's time to seek some professional help. Larger cracks like these can indicate a structural issue that needs to be addressed prior to repairing the stucco.

How do you identify EIFS?

The easiest way to identify synthetic stucco (EIFS) is by touching the material with your bare hand. When you touch the wall where the stucco is installed, it will feel like plastic. You can also knock gently on the wall. If it sounds hollow and thin, you have EIFS on your home.

How long does it take for stucco to dry after rain?

After applying Stucco, the minimum moist-curing time is 48 hours. Experts do not recommend the moist-curing phase when the humidity is near 75 %. The specified time is required to have adequate strength and have a firm condition. Raining during this period can make the bond between the substances weak and fragile.

How long does stucco need to dry before rain?

Stucco needs to dry for at least 48 hours before it rains. Depending on what stage of the installation process you're at, rain can affect the drying process by causing the mixture to become too wet and slide off the wall or alter the stucco's appearance when it does dry.

Can rain damage stucco?

When you notice water spots on your exterior long after the rain has passed, it can be a sign that stucco isn't draining properly. Without repair, this water can sit inside your walls and lead to extensive damage including rot, mold, and structural compromise.

Do hairline cracks need to be repaired in stucco?

Stucco is a cement-based siding that can easily crack that soaks in water and cause water intrusion. Repairing hairline stucco cracks is important for regular home maintenance. However, other types of stucco cracks may require professional repairs.

How much does it cost to fix cracks in stucco?

Stucco repairs cost $8 to 50 per square foot, or $40 to $60 per hour plus materials. On average, homeowners spend $477 to $1,510 on stucco repairs, while DIY stucco repair kits to fix cracks costs $40. Prices depend on the home's size, the square footage of stucco, and accessibility.

How do you know if stucco is bad?

What does water damage look like on stucco?

Cracks and bubbles along the bottom edge of the wall — Resulting from a poor drainage system, water leaking through stucco walls shows up along the bottom edge. If you see dense cracks or odd bubbles, you're looking at the signs of stucco damage.

Can water penetrate through stucco?

Despite what many people think about stucco walls, stucco walls are not water-resistant. As a matter of fact water actually absorbs into the stucco. In most cases, the problem with water leaking through stucco is that the building envelope has been breached.

How often does stucco need to be replaced?

Stucco is a very durable finish material with a typical life span of 50-80 years or more. Although it is one of the most durable surfaces available, it also features the lowest annual maintenance cost when compared to other siding materials. Stucco is a natural material consisting of an aggregate, a binder, and water.

How do you fix water damaged stucco?

If you believe the stucco requires a minor repair, you can remove the damaged section of stucco, much like you would with damaged drywall or rotted wood. Patch the area with a stucco mix that matches your current exterior. Apply three coats of the stucco and allow for drying time between applications.

Are cracks in stucco a problem?

In short, hairline stucco cracks are common and can be easily repatched. Most are not a serious indicator of foundation damage or structural disrepair. However, hairline cracks caused by foundation settlement will likely reappear after the repair and worsen.

How do you dry stucco?

How do you check for moisture in plaster walls?

What is an acceptable moisture reading for concrete?

1. What are the acceptable moisture levels in concrete? Acceptable moisture levels in concrete according to ASTM standard, when testing via ASTM F2170, the RH level of a concrete slab needs to be at or below 75% — unless the flooring system manufacturer provides alternate guidelines.

What is the maximum allowable moisture content in lumber?

For most areas of the United States, acceptable moisture levels of wood and lumber can be in the range of 9% to 14% for exterior wood or for building envelope components within constructed assemblies. An MC in this range, therefore, is considered sufficiently dry for exterior in-service wood.