Can we use 53 grade cement for plastering?

OPC is available in market in 3 grade 33, 43 and 53. But out of OPC grade, OPC43 is the best cement used for plastering in India for residential building and 53 is best cement for plastering of high rise building ,it has long lasting and life. But the most best cement is OPC 43 used for plastering work .

Which grade of cement is best for plastering?

For Plastering? A) 43 Grade, B)53 Grade. The OPC comes as 43 Grade and 53 Grade. The 53 Grade is recommended for footing, beams, slab, and columns since you need to have initial strength while making these structures.

Which cement is better for plastering OPC or PPC?

PPC cement is generally used for plastering, brick masonry and waterproofing works. PPC has a lower heat of hydration and it is prone to fewer cracks compared to OPC. PPC has lower strength than OPC but PPC provides better workability and finishing than OPC.

What is the use of 53 grade cement?

53 Grade OPC cement is Used in RCC and pre-stressed concrete of higher grades, cement grouts, instant plugging mortars etc. where initial higher strength is the criteria. 43 Grade OPC Cement is commonly used for plastering works, Non-RCC structures, pathways etc where initial setting time is not of importance.

Which cement is better 43 grade or 53 grade?

OPC 53 grade cement has better quality, strength, and less setting time compared to 33 and 43 grades of cement. Due to its high strength, is used for making concrete of higher grade (Above M20).

33 Grade vs 43 Grade vs 53 Grade of Cement

What is the meaning of OPC 53 grade cement?

OPC 53 Grade cement is required to conform to BIS specification IS:12269-1987 with a designed strength for 28 days being a minimum of 53 MPa or 530 kg/sqcm. 53 Grade OPC provides high strength and durability to structures because of its optimum particle size distribution and superior crystallized structure.

Where is OPC and PPC cement used?

Use of PPC and OPC

They can be reliably utilized in the construction of marine structures, masonry mortars and plastering, hydraulic structures. Besides, they are popularly used in mass concreting works, such as dykes, sewage pipes, dams, etc. PPC is also employed in all other applications where OPC is used.

Which grade cement is best for wall construction?

Ordinary Portland Cement (OPC) 43 Grade Cement:

It is used majorly for wall plastering works, Non-RCC structures, pathways etc. 43-grade cement attains a compression strength of 43 Mpa (megapascals) in 28 days of setting. Make sure that your 43 cement brand adheres to IS 12269 standard code.

What is the difference between OPC 43 and OPC 53?

OPC 53 sets quicker than OPC 43 and has a quite low initial setting time. It is used in structures where rapid strength gain is required like large load bearing structures like bridges, huge buildings, etc. OPC 43 on the other hand doesn't set so quickly and has a normal initial and final setting time.

How can we identify 53 grade cement?

Particular IS code number should be printed on the cement bag(i.e. )if you have ordered OPC 53 grade cement, then “IS-12269-1987” should be printed on the cement bag, and if you have ordered Portland Pozzolana Cement (PPC), “IS 1489-1991” should be printed on the cement bags.

Which plaster is best for walls?

Cement plaster is the best bet when it comes to plastering exterior walls because it is moisture-resistant and will protect the wall against climate changes as well as environmental pollution. Moreover the durability factor in cement plaster makes it the ideal choice for internal plastering too.

Is UltraTech Cement good for plastering?

UltraTech Readiplast is perfect for manual plastering on both internal and external walls, including brick, block, concrete and hollow walls. UltraTech Super Stucco is a plastering agent that is perfect for surface finishing and its biggest advantage is that it requires no curing.

What type of cement is used for walls?

All-Purpose Cement: When in doubt, all-purpose cement is a popular option. This is ideal for repairing foundation walls, laying sidewalks, creating steps and setting posts.

What is the mixing ratio for plaster?

Generally, you'll want to use approximately a 1:1 ratio of plaster to water—in other words, half and half. However, you should add only about half of the plaster at this point as more will be added later. Try not to take more than a couple minutes to sift the plaster, or it will begin to set.

What is cement plastering?

Definition of cement plaster

1 : a gypsum plaster with certain impurities present or added in the calcining process mixed with sand or wood fiber and water to form a mortar for plastering interior surfaces. — called also hard wall plaster, patent plaster.

Which cement is best for RCC?

OPC 53 Grade cement is recommended in all RCC structures like footing, column, beam and slabs, where ever initial and ultimate strength is the major structural requirement.

Is 43 grade cement good for house construction?

43 Grade OPC Cement is recommended for plastering ,tiling , masonry works, Non-RCC structures, pathways etc. where initial days strength is not of prime importance.

What is the setting time of 53 grade cement?

Explanation: Characteristics of an Ordinary Portland cement (OPC 53 Grade): Its compressive strength for 53 grades at 3 days, 7 days, and 28 days is 27 MPa, 37MPa, and 53 MPa respectively. Initial setting time shall not be less than 30 minutes and final setting time should not be more than 10 hours(600 min).

Can we use 43 grade cement for slab?

Can We Use 43 Grade Cement for Slab? Unless a project requires very high strength cement, the use of 43 Grade OPC is generally recommended in general civil construction work such as residential, commercial and industrial structures. It is used in RCC works, preferably where the grade of concrete is up to M-30.

Which cement is best for waterproofing?

Water Repellent Cement is also called Hydrophobic Cement. A small amount of Hydrophobic surfactants such as stearic acid, boric acid or oleic acid is mixed with the ordinary portland cement during grinding of clinker. Hydrophobic Cement is most suitable for basements and for making water tight concrete.

Which grade cement is normally used for construction of building?

Ordinary Portland Cement or OPC is the most widely used cement grade in the world. It has 3 grades – named as 33, 43, and 53 depending on the compressive strength which is achieved after 28 days of setting. OPC is used for mortar, concrete, stucco, and non-specialty grouts.

Which is costly OPC or PPC?

Cost. The cost of OPC is around 300 rupees per bag which is slightly more expensive than PPC. Whereas in the case of PPC, the expensive clinker is replaced by pozzolanic Material such as fly ash hence the price of PPC is slightly less than who OPC.

Which cement is cheaper OPC or PPC?

OPC is the most commonly used cement in construction. PPC is highly resistant to sulphate attacks hence its prime use is in construction of dams ,foundations , buildings near the sea shore , reservoirs , marine construction to name a few. PPC is cheaper than OPC.