Can we use 20W50 instead of 10W30?

It really comes down to personal preference. As your engine does put out significant horsepower, we would lean toward using 20W-50. If your engine sees very light duty or is built exceptionally tight, 10W-30 would be fine. But again, if you twisted our arm, we would give 20W-50 the nod for the thicker viscosity.

What is the difference between 20W50 and 10w30?

20-50 oil is an extremely viscous oil. This oil is suitable for hot climates and will provide more protection in hot weather than 10-30 oil will. 20-50 oil is also a good choice for some older vehicles. Since 20-50 oil is very thick, it may help prevent engine leaks in old cars.

What can I use instead of 10w30?

Which Oil Is Better 5w30 Or 10w30? The 5w30 oil is a great multigrade oil that can be used in low starting temperatures and high summer temperatures. In addition, it is more fuel efficient since it reduces the drag on the bearings and engine parts, which reduces fuel consumption.

What is 20W50 oil good for?

20W-50 is a common motor oil used in moderate-to-large diesel and gasoline engines, high-performance motorcycle bikes, and aviation vehicles. Its resistance to thinning at high heat also makes it popular as a racing oil and high temperature driving.

Is 20W50 good for bike?

HP RACER SYNTEC 20W 50 is recommended for new generation geared 4- stroke bikes requiring a 20W 50 grade engine oil. HP RACER SYNTEC 20W 50 far exceeds the requirements of the bikes manufactured by HMSI, Hero MotoCorp, TVS, Bajaj etc.

Type of engine oil || Difference between 10W-30 vs 20W-50 vs 10W-40 vs 5W-50

Can I put 20w50 in my motorcycle?

Suitable Vehicles. Depending on the recommendations for the particular vehicle, 20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.

Can you use 20w50 instead of 10W40 motorcycle?

10W40 is not better than 20W50 for high mileage. The difference between 10w40 and 20w50 is simply that the latter is thicker. As far as gas mileage goes, no oil will improve your gas mileage by changing from 10W40 to 20W50 or vice versa.

Is 20w50 oil thicker than 10w30?

It really comes down to personal preference. As your engine does put out significant horsepower, we would lean toward using 20W-50. If your engine sees very light duty or is built exceptionally tight, 10W-30 would be fine. But again, if you twisted our arm, we would give 20W-50 the nod for the thicker viscosity.

Is 20w50 good for petrol engine?

Virtually every mechanic recommends the use of 20w50. 20W-50 engine oil is no good for modern engines, regardless of the mileage. It is too thick, and flow to sensitive areas like multivalve cylinders, VVT / VANOS and any other timing adjusters that rely on instant oil pressure will be impeded.

What happens if I use 20w50 instead of 10w40?

Nothing much will happen. You engine will putter as happily as ever. With those engines (I assume single cylinder motorcycle) you must be careful with the oil level, that's all; all of them burn some. Must engine oil be changed after a certain time, even if it hasn't reached the recommended mileage?

Can I use 20w50 instead of 5W30?

Use in Cars

A 5W-30 oil is commonly used in passenger cars for normal use throughout the year. A 20W-50 oil will not protect a car as well in a cold winter and its greater viscosity will increase drag and friction in a passenger vehicle.

Is 10W30 better for high-mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

What oil is thicker than 10W30?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Is 20W50 good for small engines?

The short answer is yes, you can use 20w50 oil in a lawnmower but results may vary. That's not the end of it though. This kind of oil is not designed specifically to be used in a lawnmower. 20W50 is actually a fairly specialized petrol engine oil formulated for use in engines made generally before 1980.

What oil is near 20W50?

5w50, 15w50 and 10w60 tend to be the alternatives.

What is the difference between 10W 40 and 20w 50?

The motor oil will behave differently in hot weather if the temperature is cold rather than high temperature. At low temperatures, the motor oil will thicken resulting in improper lubrication. Therefore the 20w50 viscosity is made for high-temperature situations and the 10w40 is for cold temperature situations.

Is 20w50 good for high mileage?

Castrol® GTX® High Mileage 20W-50 is specially formulated for vehicles with over 75,000 miles. It contains Phosphorus Replacement Technology, which reduces the level of phosphorus and replaces it with a proprietary additive that preserves your emission system while maintaining robust wear protection.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil - 10W - can help protect worn engine bearings as well.

What is 20W 40 oil used for?

It provides strong oil film for lubrication and total protection to engine viz. protection from rust, corrosion, with reduced wear under a wide temperature range in air-cooled new generation 4 stroke motorcycles.

Will thicker oil damage my engine?

Using oil that is thicker than recommended may lead to a decrease in fuel economy, a higher load on your engine, and even a shorter life for your engine. Conversely, using thinner, lighter-weight oil than recommended can cause excessive wear and shorter life.

Can I use 10W30 instead of 20w40?

20w 40 is a thicker oil when compared to the original 10w 30 oil. So 10w 30 oil is going to flow better than 20w40 oil when you initially start it and also run it. If the oil flows better the better the oil will lubricate and protect engine parts.

Can you mix 10W 40 20w 50?

. The weights won't matter. I mixed 20w50 w/10w40 and had no probs.

What does 20W50 mean in oil?

Posted by Nally C. on December 3, 2021. The viscosity grade 20w50 is 20 weight, 50th in weight. Look at the viscosity grade of the oil (i.e. If it is at 100 degrees C, it will be half as thick as if it were at 0 degrees C, i.e. 20w50).

What is the difference between 10w 40 and 20w 40 oil?

Which Oil Is Better 10w40 Or 20w40? There is only one difference between 10W40 and 20W40 oils, which is that they have a higher 'W' number, which means they won't perform well in colder temperatures.

Which is better 10w50 or 20W50?

10w50 is thinner than 20w50 at low temp. So it will flow between every small parts and gives better cold start as compared to 20w50. First number lower than recommended and second number higher than recommended is good. You can go for 10w50.