Can Pine Sol remove oil stains from concrete?

Ingredients. Remove grease and grime from concrete and cement with Pine-Sol^® Original.

Can you use Pine-Sol on stained concrete?

Never use cleaners such as Pine-Sol, ammonia, vinegar, or bleach as they will dull, discolor or etch polished concrete and stained concrete floors.

Does Pine-Sol remove oil stains?

It's weird, to be sure, to use a product most of us think of as the stuff with which we clean the floors, but both Lestoil (which is my poison) and Pine Sol work exceedingly well as grease- and oil-stain removers. Both are made by the same company (Clorox), and they are similar but not identical degreasers.

How do you remove old oil stains from concrete?

Does Dawn dish soap remove oil from concrete?

Cola has phosphoric acid in it, which can help remove oil. Dish soap. Choose a highly concentrated, oil busting dish soap, such as Dawn. Squirt it over the stain and spread it around to cover the entire affected area.

How to Clean Concrete with Pine-Sol

Are oil stains permanent on concrete?

You may have heard that oil stains can be a permanent blemish on your concrete, but that is not true. Sure, they can be hard to remove sometimes, especially if they have been there for a while, but they are by no means permanent.

How do I remove motor oil from my driveway?

Does Coke remove oil from concrete?

One of the oldest tricks used to remove oil stains involves using Coca-Cola on the stain. This method typically works best on smaller sized stains. You can use any type of cola product and pour it directly over the oil stain and then let it soak in overnight (or for at least 8 hours).

Is Pine-Sol a good degreaser?

Pine-Sol already consists of two agents, propylene glycol and benzoic acid, that are instrumental in eliminating stains and odors while knocking out bacteria and mold. Therefore, if you're looking to do a deep clean, you can use undiluted Pine-Sol to utilize its full strength.

What should you not use Pine-Sol on?

Pine-Sol^® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.

Can you mix Pine-Sol and vinegar?

Taught You. “Fill up the sink with hot water & a cap full of your favorite Pine Sol floor cleaner. Add 2 tbsp of vinegar & use to clean any type of floor. I use this method on my hardwood floors to get a clean, smooth & shiny surface!”

Does Pine-Sol hurt concrete?

You can use Pine-Sol® Cleaners on most concrete floors. Pine-Sol® Cleaners are concentrated formulas that you dilute for most jobs. For general concrete cleanup, use a 24 oz. bottle of Pine-Sol® for 12 gallons of cleaning power.

What is the best cleaner for stained concrete floors?

If your indoor concrete flooring is stamped, use a mop and mix water and a mild cleaner in a bucket. Avoid using highly acidic or alkaline substances on these floors. Instead, select from a mild floor cleaner, liquid dish detergent, a stone cleaner or Castile soap.

Can you use Pine-Sol on garage floor?

Don't: Never use everyday floor cleaning products, such as Pine-Sol; always select a pH-neutral cleaner. Never use products such as ammonia, vinegar, bleach, muriatic acid, or other harsh cleaners on concrete floors.

How do I remove motor oil from my garage floor?

First, cover the oil stain in clay cat litter, letting it sit for several hours (or overnight if it's a heavy stain.) Then sweep up the cat litter and pour liquid dish soap over the stain to break up the grease. Let it soak up for at least an hour, then use a wire scrub brush and clean the stain in a circular motion.

Will bleach remove oil stains from driveway?

When it comes to oil stains and other stubborn stains, pre-washing the outdoor concrete surface with bleach will prepare the area for a further power wash. Bleach can be diluted to the strength that is needed for the particular project you are working on. However, this won't be necessary in most cases.

Can WD-40 remove oil stains from concrete?

Yes, in some cases, WD-40 may help remove oil stains from concrete driveways. WD-40 is a water displacement spray that has the ability to penetrate and remove grease. To use WD-40, first spray a generous amount on the oil stain then let it sit for at least twenty minutes.

Does Coke remove oil stains?

If a car has left an oil stain on your driveway or in your garage, some room-temperature Coca-Cola will do the trick. Pour a can or two of soda on the stain and let it sit for several hours (or overnight). Then wipe away what you can and rinse away the rest.

Will baking soda absorb oil?

Baking soda helps absorb excess oil. Sprinkle it on and blot to dislodge soaked-in grease. Skip the dryer until you've successfully removed the entirety of the stain. Heat will set in the stain.

How do you remove black stains from concrete?

Sponge the bleach solution onto the stained surfaces and work it in with a scrub brush. Keep the stained areas damp for five minutes, sponging on more of the bleach solution as needed to keep it from drying. Then rinse thoroughly with water.

What is a good homemade concrete cleaner?

Simply fill a spray bottle with equal parts water and vinegar (or water and baking soda), and add a little bit of liquid dish detergent. Spray the mixture on your concrete surface and let it sit for about 30 minutes. Then scrub and rinse your concrete.

Does CLR remove oil stains from concrete?

CLR® Grease-Free. Fast-acting, powerful cleaner formulated to quickly clean baked on foods, counters, stove tops, oven racks, sinks, stubborn oil, grease and tar from cement, terrazzo, stone floors, blacktop, sidewalks, driveways, garage floors, barbeque grills, pool decks, motors and machinery.