Can I wait a year to stain my deck?

Some stain manufacturers suggest you should wait 3-12 months to let the wood dry while others say to stain the deck right away. The answer can be both just as long as you prep the new wood properly for the application of the stain.

What happens if you wait too long to stain a deck?

However, choosing not to stain or paint the deck is simply a preference of the homeowner. The effects that can occur due to a lack of treatment are aesthetic in nature. After 6 months, the wood will start to lose its color and will begin to fade.

How long can you wait to stain a deck?

Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it's best to let the wood fully dry before finishing.

Can I stain my deck after 2 years?

As a general rule, your deck should be stained every 2-3 years. This can change, however, if you are in an area of high-humidity or especially volatile weather. The signs to look for when determining if you need deck staining are: The stain color of the wood is wearing off.

What happens if you don't stain your deck?

Your Deck Will Lose its Luster

Over time, the sun's rays will dull and fade the finish. When this happens, a fresh coat of stain can quickly restore your deck's beauty. If you decide to leave your deck alone instead, expect the loss of color and shine to progress until your deck takes on a gray-ish, green-ish hue.

How long should I wait to seal or stain my new deck or fence in Northwest Georgia?

How long will an untreated deck last?

A deck made of untreated wood can last anywhere from 10 to 30 years. Decks made of treated wood and composite materials can last as long as 50 years. Many composite decks come with a 20-year warranty – and often a lifetime guarantee.

Can you just seal a deck and not stain it?

A: It's really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

Can you stain wood after a year?

One of the main reasons the professionals don't recommend staining wood decks is because of the amount of time and energy involved. Stains don't generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

Can I apply a second coat of stain a year later?

Yes you cannot apply now but you can apply a light coat after a light cleaning 6-12 months later. It is normal that you have to redo every 2 years and other semi-transparent brands will not last any longer.

Why is my deck stain peeling after one year?

Deck stains will generally peel for two basic reasons: over application and poor adhesion. This is simple — too much stain on the surface of the wood. With deck stains, specifically with semi-transparent finishes, more is not better. You only want to apply as much product as the wood can easily absorb.

Should you stain your deck the first year?

If your deck was made with new, smooth wood, you'll need to wait at least three months before staining your deck. Rough-sawn wood can be stained right away, as long as it is clean and the wood is dry.

How long to wait to stain pressure treated wood?

Allow the wood to dry 24 hours before applying stain.

What month should you stain your deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry.

What temperature is it not good to stain a deck?

If it's too hot, the stain may dry too quickly, potentially causing lap marks and uneven penetration. Avoid staining your deck if it's above 90 degrees Fahrenheit. To ensure this, either choose a cooler day or stain your deck in the morning before it gets too hot.

How long to wait after pressure washing deck before staining?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

How do I know if my deck is dry enough to stain?

Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it's ready to be sealed or stained.

Is it better to brush or roll stain on a deck?

The first and most obvious reason to roll on deck stain as opposed to brushing it on is that the former allows you to cover a much larger surface area in less time. Rollers are wider, more efficient, and easier to operate. Additionally, using a roller helps you achieve a smoother finish.

Do decks need two coats of stain?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

Can I stain over old stain?

Can I stain on top of old stain? Yes! In fact, applying stain over stain is a fairly simple process. It works especially well if you're applying a dark stain over a lighter stain.

Why do you have to wait a year to stain wood?

Let the New Deck Dry and Weather for 3-12 Months:

This reduces the stain's ability to penetrate. The wood will dry and turn gray from the exposure to the sun's ultraviolet rays.

When should you not stain wood?

You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.

What happens to wood if you don't stain it?

Without stain, any type of paint or sealant, rainwater, dew or snow can easily penetrate the decking. The wood will then swell until it dries when it will shrink again. This pattern of swelling and shrinking can cause damage to the wood such as splits, checks, splinters, cracks, and other blemishes.

Is it too late to seal my deck?

Usually, late summer and early fall are the best times for deck restoration and sealing. However, if your area experiences typically drier springtime weather or summertime temps that don't get too hot, you can likely schedule deck sealing anytime between early April and late October.

Can you stain an old deck without sanding?

You don't even have to sand unless you want or if it could really use one. The reason you want to clean the wood first is to remove any dirt, mold or mildew spores to make sure the stain has a clean surface to bond.

What happens if you don't seal stain?

Wood is dried-out and dull if you do not apply some sort of sealer. Staining and finishing are two very different things. By applying pigments, a stain is meant to darken or dye wood, but the wood is not preserved by staining.