Can I use silicone spray on my serpentine belt?

Trusted mechanic suggested spray silicone to quiet squealing belt. Tried it and it worked. Did it several times over a period of about 6 months or so. Serpentine belt broke most of the way across and beat the underhood mat up.

Can I use silicone spray on car belt?

Rubber parts can be lubricated with silicone or dry Teflon lube products. Spraying an oil-based lube on a serpentine or poly-ribbed drive belt may temporarily alleviate the problem, but it will not solve it permanently. As well as damaging the belt, it also causes damage to the belt.

What can I use in place of belt dressing?

By far, the best belt dressing money can buy is a tube of grease. Forget all these expensive concoctions. Start with a dry belt and pulleys, add a little grease and let the belt run for a few minutes.

What to spray on serpentine belt to stop squeaking?

WD-40 is a water displacement lubricant and should remove the moisture from the belt ribs. In most cases, removing the moisture will stop the squeal. Allow the engine to run for a few minutes, then spray rubber dressing, also known as belt dressing, onto the belt in the same manner employed above.

Can you use belt dressing on serpentine belts?

Should I use belt dressing on my serpentine belt? Yes. You should apply it to the grooved side of the belt every 3,000 miles or with every oil change. Doing this will help prolong the life of your belt and prevent any belt slip problems.

The Secret to Fix a Squeaky Belt in Your Car

Can I use WD-40 as belt dressing?

With this specially formulated spray from WD-40 Company, squealing belts are no problem at all. Just spray a little WD-40 Specialist Automotive Belt Dressing with the engine running. It penetrates into the cord fibres to restore flexibility and pliability.

Why do brand new serpentine belts squeal?

Belt or Pulley Misalignment

What is this? Belt or pulley misalignment is a common issue that causes changed serpentine belts to still squealing. Misalignment means that the grooves on your belt are not aligned with the ones on your pulley. It also tells that you shift the belt a bit in or out in one of the pulleys.

Does silicone spray preserve rubber?

Berryman Professional Silicone Spray is an excellent lubrication, waterproofing, and corrosion protection product for most surfaces including metal, wood, rubber, and plastic.

How do you lubricate a drive belt?

i use a small dab of dielectric grease across the ribs of the belt sometimes. It will spread itself out from turning round and round, and seems to be sticky enough to prevent slip if the tension is adequate. Don't lube it. You will cause it to slip.

Is belt dressing a lubricant?

Belt dressing limits friction between parts and stops squeaking sounds in running machinery. These lubricants are ideal for flat, round, or V-shaped belts in leather, rubber, or canvas.

Does serpentine belt need lube?

Lubricants reduce friction and can allow a serpentine belt or V-belt to slip. The chemicals in oil or grease also can damage the rubber or synthetic rubber in the belt, too. Belt slippage can also be caused by loss of tension due to maladjustment, or by a weak or broken automatic tensioner.

Can I drive with a squeaky serpentine belt?

That's why it's recommended that the serpentine belt is replaced early when the squealing symptoms are first noticed. Although it may be safe to drive with the squealing for a few days or weeks, the belt will eventually need to be replaced, and for safety, the earlier it's repaired, the better.

Does WD 40 ruin serpentine belt?

Is It Okay To Spray Water On Serpentine Belt? Drive belts should never be sprayed with belt dressing, WD-40, or any lubricant. It is possible for motor oil and coolant to damage a serpentine belt.

What is spray silicone?

Silicone spray lubricant lubricates metals that fasten together and move, including cables, bearings, springs, hinges, hoses, latches and much more. Silicone sprays are an effective way of lubricating metals from friction.