Can I use copper spark plugs instead of iridium?

Platinum and Iridium plugs perform at a lower level than copper spark plugs, because they are less conductive and they tend to overheat. However, the overall longevity of these two types of metal is better than copper plugs. In reality, copper has the best performance of all three and the worst longevity.
Takedown request   |   View complete answer on carsdirect.com


Can I use normal spark plugs instead of iridium?

Your car calls for iridium plugs

They will tend to take longer to oxidize and begin to break down than other metal types. I would simply go with the manufacturer's recommendations regarding your spark plugs and will probably find that the mileage numbers will be closer to expectations than not. Agreed.
Takedown request   |   View complete answer on mechanics.stackexchange.com


Are copper spark plugs better?

Copper is an excellent conductor of electricity – better than any other type of material used in spark plugs – and also transfers heat faster. However, copper is soft and has a low melting point so it is always covered with a nickel alloy to protect it.
Takedown request   |   View complete answer on championautoparts.com


What is better than iridium spark plugs?

The platinum increases the durability of the plug, adding 100,000 miles to its service life. Platinum spark plugs can generate more heat than their iridium counterparts, ensuring lesser buildup of debris. This kind of spark plug is best if you have a new car equipped with an electronic distributor ignition system.
Takedown request   |   View complete answer on motorverso.com


Do copper spark plugs need to be gapped?

Not always. In the past, it was necessary to gap spark plugs, but today spark plugs are usually pre-gapped. It is advisable to double check that the gap is correctly set to the vehicle's recommended setting when installing spark plugs.
Takedown request   |   View complete answer on championautoparts.com


Stop Using iridium Spark Plugs! Copper Spark Plugs are Better - Pro Tips with Robby Joe Bob



How long will copper spark plugs last?

So how long do they typically last? Well, standard copper plugs are said to last anywhere from 10,000 to 20,000 miles (16,093 to 32,187 kilometers), while more expensive iridium or platinum spark plugs can last 60,000 miles (96,561 kilometers) or more [source: Spark plugs UK].
Takedown request   |   View complete answer on auto.howstuffworks.com


Should you grease spark plugs?

Metal shell stretch changes the heat rating of the spark plug and can result in serious engine damage caused by pre-ignition. Do not use anti-seize or lubricant on NGK spark plugs. It is completely unnecessary and can be detrimental.
Takedown request   |   View complete answer on ngksparkplugs.com


Should I upgrade to iridium spark plugs?

Starting your car in the winter

Winter starts can seriously decrease your car's performance, and also run the risk of spark plug fouling. Upgrading your spark plugs to an Iridium fine wire plug will provide instant starts in cold weather and help eliminate the risk of fouling.
Takedown request   |   View complete answer on ngkntk.in


Which type of spark plug is best?

Iridium. The best spark plugs on the market boast an iridium construction. Iridium spark plugs give you even better gas mileage, performance, reliability, and longevity than double-platinum plugs.
Takedown request   |   View complete answer on thedrive.com


Are all NGK Spark Plugs iridium?

NGK builds two types of iridium spark plugs: OE Iridium and Iridium IX®. Every plug in the Laser Series was designed for an OEM application. All dual precious metal plugs are designed to provide maximum longevity.
Takedown request   |   View complete answer on ngksparkplugs.com


Does it matter what spark plugs you use?

While you should buy spark plugs in matching sets for your vehicle, not all spark plugs are universal. Spark plugs come in different sizes with different gaps and are manufactured using a variety of metals. Finding the ones that you need can be difficult.
Takedown request   |   View complete answer on diycarserviceparts.co.uk


Do iridium plugs burn hotter?

Denso Iridium Power plugs feature the heat range at the end of the part number. ... Denso plugs get colder the higher the number, hotter the lower the number. Starting with part # IK20 (heat range 20), a colder plug would be # IK22, a hotter plug would be # IK16.
Takedown request   |   View complete answer on wapcar.my


Do iridium spark plugs increase horsepower?

Yes, NGK iridium spark plugs can increase horsepower. By providing more spark to the firing tip, you combust more fuel, producing more horsepower.
Takedown request   |   View complete answer on mycarmakesnoise.com


Can the wrong spark plug damage the engine?

It is possible that incorrect spark plugs can damage the engine of the car. For example, using an inductive spark plug with a resistance-type ignition system will cause misfiring and poor performance. The result is a loss of power and the car may stall.
Takedown request   |   View complete answer on carstopics.com


Is it worth upgrading spark plugs?

Investing in high-performance spark plugs is a surefire way to save some money in the long run. Better gas mileage is just the beginning. These premium spark plugs last longer than conventional plugs, which means you'll be able to go a longer time between tune-ups, keeping your maintenance costs down.
Takedown request   |   View complete answer on pulstar.com


Can I use platinum instead of iridium?

Platinum may be harder than copper, but iridium is the hardest among the three, and iridium spark plugs outlast platinum spark plugs by almost twice the mileage. The only issue with iridium is that it costs double the price of platinum with little improvements in performance.
Takedown request   |   View complete answer on carparts.com


Why are NGK Spark Plugs better?

Modern engines demand more power while using less fuel, shortening the life of traditional iridium and platinum spark plugs. NGK's patented ruthenium technology stands up better to wear to bring maximum durability and performance to your engine.
Takedown request   |   View complete answer on ngksparkplugs.com


Can I mix spark plugs?

Misfiring due to excessive heat, quenching, increased fuel consumption and even engine failure can occur from the use of incorrect or mismatched spark plugs, so it's best to replace all of your spark plugs at the same time, and with the correct type of spark plug, to ensure smooth and consistent operation.
Takedown request   |   View complete answer on autoguru.com.au


What are the 3 types of spark plug?

Nowadays there are different kinds of spark plugs available in the markets to choose from i.e. copper, platinum and Iridium spark plugs. The copper spark plug is the most commonly used spark plug as it is the cheapest among the three.
Takedown request   |   View complete answer on ngkntk.in


Are iridium plugs worth the money?

It has a high melting point, which also means that it can produce great electrodes while retaining its fine characteristics, Iridium spark plugs gives you better performance, complete combustion and excellent longevity which makes you free from change your spark plugs frequently.
Takedown request   |   View complete answer on ngkntk.in


Should I use OEM spark plugs?

So even if you're trying to save money on spark plugs and don't care about longevity, OEM plugs are still the way to go. They'll ensure maximum performance and fuel economy, and that will save you on one of your largest vehicle expenses (fuel).
Takedown request   |   View complete answer on bluespringsfordparts.com


Will changing spark plugs make a difference?

Improved fuel economy – Having a worn-out spark plug can reduce your fuel economy by as much as 30%. With new spark plugs, your vehicle can run as efficiently as intended.
Takedown request   |   View complete answer on allensamuels.com


Is it better to change spark plugs hot or cold?

You'll want to wait at least 30 minutes before installing new spark plugs. That should give the engine adequate time to cool down.
Takedown request   |   View complete answer on getjerry.com


How tight should spark plugs be?

Tighten the spark plug finger-tight until the gasket reaches the cylinder head, then tighten about ½ – ⅔ turn more with a spark plug wrench.
Takedown request   |   View complete answer on ngksparkplugs.com
Previous question
How much is YouTube TV a month?
Next question
How fast can Quicksilver run?